The SLG6M6001V is a 3.8 mΩ 10 A programmable, single-channel load switch that is able to switch 1 to 5 V power rails. A noise tolerant analog current mirror signal is provided for high-accuracy reporting over the full load range. The product is packaged in an ultra-small 2 x 3 mm package. Features •.
• 2 x 3 mm STQFN 18L FC package (6 fused pins for drain and 6 fused pins for source)
• Logic level ON pins able to support 1.05 V CMOS Logic
• 3.8 mΩ RDSONwhile supporting 10 A
• Discharges load when off
• Two Over Current Protection Modes (Short Circuit/Active)
• Short Circuit Current Limit
• Active Current Limit
• Over Temperature Protection
• NVM programmable configuration for Ramp Rate, Discharge, Logic Cell, Temperature Limit, and Current Limit
• High / Low Current Select
• Automatic Switch from Low to High Current
• Cu.
Similar Product
No. | Part # | Manufacture | Description | Datasheet |
---|---|---|---|---|
1 | SLG6M6201V |
Silego |
10A Power Switch | |
2 | SLG |
Rubycon |
CONDUCTIVE POLYMER ALUMINUM SOLID ELECTROLYTIC CAPACITORS | |
3 | SLG2016 |
Infineon Technologies |
Alphanumeric Intelligent Display DEVICES | |
4 | SLG3NB3331 |
Silego |
32.768 kHz and MHz GreenCLK | |
5 | SLG3SY3952 |
Silego |
1:3 Clock Buffer |