Part Number | SN65LVDT14 |
Manufacturer | Texas Instruments (https://www.ti.com/) |
Title | One LVDS driver plus four LVDS receivers |
Description | The SN65LVDTxx devices are multi-channel LVDS transceivers that operate using LVDS line drivers and receivers. The SN65LVDTxx devices support sign... |
Features |
•1 Integrated 110-Ω nominal receiver line termination resistor • Single 3.3-V power supply (3-V to 3.6-V range) • Supports signaling rates of at least 250 Mbps • Flow-through pinout simplifies PCB layout • LVTTL-compatible logic I/Os • ESD protection on bus pins exceeds 16 kV • Meets or exceeds the ... |
Datasheet | SN65LVDT14 pdf datasheet |
Part Number | SN65LVDT14-EP |
Manufacturer | Texas Instruments |
Title | Four LVDS drivers plus one LVDS receiver |
Description | The SN65LVDT14 combines one LVDS line driver with four terminated LVDS line receivers in one package. It is designed to be used at the Memory Stic. |
Features |
• Controlled Baseline – One Assembly/Test Site, One Fabrication Site • Enhanced Diminishing Manufacturing Sources (DMS) Support • Enhanced Product-Change Notification • Qualification Pedigree (1) • Integrated 110-Ω Nominal Receiver Line Termination Resistor • Operate From a Single 3.3-V Supply • Gre. |
Datasheet | SN65LVDT14-EP pdf datasheet |
Part Number | SN65LVDT125A |
Manufacturer | Texas Instruments |
Title | LVDS 4x4 CROSSPOINT SWITCH |
Description | The SN65LVDS125A and SN65LVDT125A are 4x4 nonblocking crosspoint switches. Low-voltage differential signaling (LVDS) is used to achieve signaling . |
Features |
1
• Signaling Rates >1.5 Gbps per Channel • Supports Telecom/Datacom and HDTV Video Switching • Non-Blocking Architecture Allows Each Output to be Connected to Any Input • Compatible With ANSI TIA/EIA-644-A LVDS Standard • 25 mV of Input Voltage Threshold Hysteresis • Propagation Delay Times, 900 ps. |
Datasheet | SN65LVDT125A pdf datasheet |
Part Number | SN65LVDT125 |
Manufacturer | Texas Instruments |
Title | LVDS 4x4 CROSSPOINT SWITCH |
Description | The SN65LVDS125 and SN65LVDT125 are 4x4 nonblocking crosspoint switches. Low-voltage differential signaling (LVDS) is used to achieve signaling ra. |
Features |
D Signaling Rates >1.5 Gbps per Channel D Supports Telecom/Datacom and HDTV Video
Switching
D Non-Blocking Architecture Allows Each
Output to be Connected to Any Input
D Compatible With ANSI TIA/EIA-644-A LVDS
Standard
D 25 mV of Input Voltage Threshold Hysteresis D Propagation Delay Times, 900 ps T. |
Datasheet | SN65LVDT125 pdf datasheet |
Part Number | SN65LVDT122 |
Manufacturer | Texas Instruments |
Title | LVDS CROSSPOINT SWITCH |
Description | The SN65LVDS122 and SN65LVDT122 are crosspoint switches that use low voltage differential signaling (LVDS) to achieve signaling rates as high as 1. |
Features |
• Designed for Signaling Rates (1) Up To 1.5 Gbps • Total Jitter < 65 ps • Pin-Compatible With SN65LVDS22 and SN65LVDM22 • 25 mV of Receiver Input Threshold Hysteresis Over 0-V to 4-V Common-Mode Range • Inputs Electrically Compatible With CML, LVPECL and LVDS Signal Levels • Propagation Delay Times. |
Datasheet | SN65LVDT122 pdf datasheet |
Since 2024. D4U Semiconductor. | Contact Us | Privacy Policy