Surface Mount Transient Voltage Suppressors
TP5.0SMDJ Series
Working Voltage: 10 to 58 V Peak Pulse Power: 5000 W
Surface Mount Transient Voltage Suppressors
Fea...
Description
TP5.0SMDJ Series
Working Voltage: 10 to 58 V Peak Pulse Power: 5000 W
Surface Mount Transient Voltage Suppressors
Features
● Optimized glass passivated chip ● Tj = 150 °C capability suitable for high
reliability and automotive requirement
● 5000 W peak pulse power capability with a 10/1000 μs waveform, repetitive rate (duty cycle):0.01 %
● Meet ISO 7637-2 load dump test (varied by test condition)
● High reliability application and automotive grade AEC Q101 qualified
● Low leakage ● Uni and Bidirectional unit ● Excellent clamping capability ● Very fast response time ● RoHS compliant
Mechanical Data
● Case: Molded plastic ● Epoxy: UL 94V-0 rate flame retardant
● Lead: Solderable per MIL-STD-750, method 2026
● Polarity: Color band denotes cathode end except Bipolar
● Mounting position: Any
SMC/ DO-214AB
Maximum Ratings(TA=25℃ unless otherwise noted)
Parameter Peak power dissipation with a 10/1000μs waveform(1)
Peak pulse current wih a 10/1000μs waveform(1)
Symbol
Value
PPP 5000
IPP See Next Table
Power dissipation on infinite heatsink at TL = 50 °C Peak forward surge current, 8.3 ms single half sinewave unidirectional only(2)
PD IFSM
6.5 300
Maximum instantaneous forward voltage at 100A for unidirectional only
VF
3.5
Operating junction and storage temperature range
Note:
TJ, TSTG –55 to +150
(1)Non-repetitive current pulse per Fig.5 and derated above TA= 25 °C per Fig.1
(2)Measured on 8.3 ms single half sine-wave or equivalent square wave, duty cycle = 4 puls...
Similar Datasheet