DatasheetsPDF.com

555


Part Number 555
Manufacturer Fairchild Semiconductor
Title Single Timer
Description The LM555 is a highly stable controller capable of producing accurate timing pulses. With a monostable operation, the delay is controlled by one e...
Features
• High-Current Drive Capability: 200 mA
• Adjustable Duty Cycle
• Temperature Stability of 0.005%/°C
• Timing From μs to Hours
• Turn off Time Less Than 2 μs Applications
• Precision Timing
• Pulse Generation
• Delay Generation
• Sequential Timing Description The LM555 is a highly stable controller...

File Size 268.17KB
Datasheet 555 PDF File






Similar Datasheet

550D : www.vishay.com 550D Vishay Sprague Solid-Electrolyte TANTALEX™ Capacitors for High Frequency Power Supplies PERFORMANCE CHARACTERISTICS Operating Temperature: -55 °C to +125 °C (above 85 °C, voltage derating is required) Capacitance Tolerance: at 1 kHz, +25 °C ± 20 %, ± 10 % standard. ± 5 % available as special Dissipation Factor: at 1 kHz, +25 °C. Dissipation factor, as determined from the expression 2fCR, shall not exceed the values listed in the standard ratings tables DC Leakage Current (DCL Max.): at +25 °C: leakage current shall not exceed the values listed in the Standard Ratings table at +85 °C: leakage current shall not exceed 10 times the values listed in the Standard Rating.

5510-26S-01-01-F1 : D-SUB Socket High Density Right Angle Type Part No.: : Part No.: : Date : Rev. : 5510-XXS-XX-XX-F1 MAY-02-2008 A (Evaluted) (Checked) (Approval) (Approval) Yang xia Jeremy Liu Mike Wu UL:Recognized NO. E 144392 Head Office 184 2 2F, 184, Chang –Teh Road, Sec. 4, Shih-Lin, Taipei, Taiwan, R.O.C. TEL:886-2-28802631( 10 Lines ) FAX:886-2-28802710 ·28802888 http://www.neltron.com.tw E-mail : neltron@neltron.com.tw China Factory Science Service Plaza ,1,Hengtian Second Road , Tangxia Town Dongguan City .Guangdong Province ,China Bill of Approval Sheet www.DataSheet4U.com Product Description: D-SUB Socket High Density Right Angle Type Product Part NO.: Index 1 2 3 4~6 7 Cover Bill.

5510-xxS-02A-01 : www.DataSheet4U.com POSITION 15 26 44 62 A 16.33 24.66 38.38 54.84 B 25.00 33.30 47.10 63.50 C 30.80 39.20 53.10 69.40 D 2.29 2.29 2.29 2.41 .

5510-xxS-xx-xx-F1 : D-SUB Socket High Density Right Angle Type Part No.: : Part No.: : Date : Rev. : 5510-XXS-XX-XX-F1 MAY-02-2008 A (Evaluted) (Checked) (Approval) (Approval) Yang xia Jeremy Liu Mike Wu UL:Recognized NO. E 144392 Head Office 184 2 2F, 184, Chang –Teh Road, Sec. 4, Shih-Lin, Taipei, Taiwan, R.O.C. TEL:886-2-28802631( 10 Lines ) FAX:886-2-28802710 ·28802888 http://www.neltron.com.tw E-mail : neltron@neltron.com.tw China Factory Science Service Plaza ,1,Hengtian Second Road , Tangxia Town Dongguan City .Guangdong Province ,China Bill of Approval Sheet www.DataSheet4U.com Product Description: D-SUB Socket High Density Right Angle Type Product Part NO.: Index 1 2 3 4~6 7 Cover Bill.

55140 : The 55140 is a small flange mounting hall effect sensor occupying only 3.22cm² (0.500”² ) board space with a choice of digital, or programmable analog outputs. It is available as three-wire (voltage output) or two-wire (current output) versions. Its case design enables screw or adhesive mounting and the sensor is capable of switching up to 24Vdc and 20mA. It comes with a range of sensitivity and cable length options. Features & Benefits ■ Magnetically operated position sensor ■ Digital and programmable analog types available ■ Medium, high or programmable sensitivities ■ Three-wire (voltage output) or two-wire (current output) versions ■ Vibration 50g max. @ 502,000Hz ■ Shock 150g max. @ 11.

5518 : High Current RF Chokes Special Features 5500 Series L (uH) Part ±10% Number @ 1KHz 5501 5 5502 10 5503 27 5504 50 5505 100 5506 150 5507 250 5508 5 5509 10 5510 27 5511 50 5512 68 5513 100 5514 150 5515 5 5516 10 5517 27 5518 50 5519 68 5520 100 5521 5 5522 10 5523 27 5524 50 DCR (Ω) Max. 0.013 0.017 0.030 0.045 0.061 0.069 0.089 0.009 0.012 0.022 0.028 0.034 0.038 0.046 0.006 0.008 0.014 0.020 0.023 0.027 0.004 0.006 0.010 0.013 I, DC (A) 10 9 7 5.6 4.9 4.6 4 14 12 9 8 7.3 6.8 6.3 19 16 12.5 10.5 10 10 23 20 15 15 Dim. A Max. 0.88 1.12 0.88 0.88 1.12 1.38 1.62 0.88 1.12 0.88 1.12 1.12 1.38 1.62 1.12 1.38 1.12 1.38 1.38 1.62 1.38 1.69 1.38 1.62 Dim. B Max. 0.63 0.63 0.81 0.81 0.81 0.81 0.81.

551MILF : The ICS551 is a low cost, high-speed single input to four output clock buffer. Part of IDT’s ClockBlocksTM family, this is our lowest cost, small clock buffer. See the ICS552-02B for monolithic dual version of the ICS551 in a 20 pin QSOP. IDT makes many non-PLL and PLL based low skew output devices as well as Zero Delay Buffers to synchronize clocks. Contact IDT for all of your clocking needs. Features • Low skew (250 ps) outputs • Pb-free packaging • Low cost clock buffer • Packaged in 8-pin SOIC • Input/Output clock frequency up to 160 MHz • Non-inverting output clock • Ideal for networking clocks • Operating Voltages of 3.3 and 5.0 V • Output Enable mode tri-states outputs • Advanced, lo.

551MLF : The ICS551 is a low cost, high-speed single input to four output clock buffer. Part of IDT’s ClockBlocksTM family, this is our lowest cost, small clock buffer. See the ICS552-02B for monolithic dual version of the ICS551 in a 20 pin QSOP. IDT makes many non-PLL and PLL based low skew output devices as well as Zero Delay Buffers to synchronize clocks. Contact IDT for all of your clocking needs. Features • Low skew (250 ps) outputs • Pb-free packaging • Low cost clock buffer • Packaged in 8-pin SOIC • Input/Output clock frequency up to 160 MHz • Non-inverting output clock • Ideal for networking clocks • Operating Voltages of 3.3 and 5.0 V • Output Enable mode tri-states outputs • Advanced, lo.

551MLN : The ICS551 is a low cost, high-speed single input to four output clock buffer. Part of IDT’s ClockBlocksTM family, this is our lowest cost, small clock buffer. See the ICS552-02B for monolithic dual version of the ICS551 in a 20 pin QSOP. IDT makes many non-PLL and PLL based low skew output devices as well as Zero Delay Buffers to synchronize clocks. Contact IDT for all of your clocking needs. Features • Low skew (250 ps) outputs • Pb-free packaging • Low cost clock buffer • Packaged in 8-pin SOIC • Input/Output clock frequency up to 160 MHz • Non-inverting output clock • Ideal for networking clocks • Operating Voltages of 3.3 and 5.0 V • Output Enable mode tri-states outputs • Advanced, lo.

551S : The 551S is a low cost, high-speed single input to four output clock buffer. The 551S has best in class Additive Phase Jitter of sub 50fsec. IDT makes many non-PLL and PLL based low skew output devices as well as Zero Delay Buffers to synchronize clocks. Contact IDT for all of your clocking needs. Features • Low additive phase jitter RMS: 50fs • Extremely low skew outputs (50ps) • Low cost clock buffer • Packaged in 8-pin SOIC and 8-pin DFN, Pb-free • Input/Output clock frequency up to 200MHz • Non-inverting output clock • Ideal for networking clocks • Operating Voltages: 1.8V to 3.3V • Output Enable mode tri-states outputs • Advanced, low power CMOS process • Extended temperature range (-4.

551S : . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 1.3 External Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2. Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 2.1 Absolute Maximum Ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 2.2 Recommended Operating Conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ..

552-02S : The 552-02S is a low skew, single-input to eight- output clock buffer. The device offers a dual input with pin select for switching between two clock sources. It has best in class Additive Phase Jitter of sub 50fsec IDT makes many non-PLL and PLL based low skew output devices as well as Zero Delay Buffers to synchronize clocks. Contact us for all of your clocking needs. Features • Low RMS Additive Phase Jitter: 50fs • Low output skew: 50ps • Operating Voltages of 1.8V to 3.3V • Packaged in 16-pin TSSOP and 16-pin VFQFN, Pb-free • Input clock multiplexer simplifies clock selection • Output Enable pin tri-states outputs • Input/Output clock frequency up to 200 MHz • Low power CMOS technology .

552R-01ILF : The ICS552-01 produces 8 low-skew copies of the multiple input clock or fundamental, parallel-mode crystal. Unlike other clock drivers, these parts do not require a separate oscillator for the input. Using IDT’s patented Phase-Locked Loop (PLL) to multiply the input frequency, it is ideal for generating and distributing multiple high-frequency clocks. This is a single chip used for 3 different applications: 1) ICS552-01 (A mode) — an Oscillator mutiplier 2) ICS552-01 (B mode) — a Dual 1:4 buffer 3) ICS552-01 (C mode) — a 1:8 Oscillator buffer Features (all) • Packaged as 20-pin SSOP (QSOP) • Pb-free packaging • Operating voltages of 3.0 V to 5.5 V • Industrial temperature available Features .

552R-01LN : The ICS552-01 produces 8 low-skew copies of the multiple input clock or fundamental, parallel-mode crystal. Unlike other clock drivers, these parts do not require a separate oscillator for the input. Using IDT’s patented Phase-Locked Loop (PLL) to multiply the input frequency, it is ideal for generating and distributing multiple high-frequency clocks. This is a single chip used for 3 different applications: 1) ICS552-01 (A mode) — an Oscillator mutiplier 2) ICS552-01 (B mode) — a Dual 1:4 buffer 3) ICS552-01 (C mode) — a 1:8 Oscillator buffer Features (all) • Packaged as 20-pin SSOP (QSOP) • Pb-free packaging • Operating voltages of 3.0 V to 5.5 V • Industrial temperature available Features .

553-xxxx-xxx : 3mm LED CBI Circuit Board Indicator Ganged Arrays 553-xxxx-xxx CBI Type 553-xxxx-0xx Standard View CARRIER 9.06 [.36] 5.16 [.203] REF STANDARD POLARITY CATHODE ON RIGHT BI-LEVEL ASSY ULTRASONIC WELD 10.67 [.420] Features • 2 through 12 LEDs • Mount on .200 center lines • Standard View: 553-xxxx-0xx compatible with: 553-xxxx single bi-level • Backlight: 553-22xx-1xx compatible with: 553-22xx-100 single backlighting bi-level 3.68 [.145] 90° TOP LED 4.44 [.175] 2.54 REF [.100] TYP 2.80 [.103] MAX CBI Type 553-22xx-1xx Backlight 11.56 [.455] STANDARD POLARITY CATHODE ON RIGHT • DIN Compatible: 553-xxxx-2xx compatible with: 553-xxxx-200 single DIN41494 bi-level • Reduces insertio.

5532 : .

553MILF : The ICS553 is a low skew, single input to four output, clock buffer. Part of IDT’s ClockBlocksTM family, this is our lowest skew, small clock buffer. See the ICS552-02 for a 1 to 8 low skew buffer. For more than eight outputs, see the MK74CBxxx BuffaloTM series of clock drivers. IDT makes many non-PLL and PLL based low skew output devices as well as Zero Delay Buffers to synchronize clocks. Contact us for all of your clocking needs. Features • Extremely low skew outputs (50 ps maximum) • Packaged in 8-pin SOIC • Pb (lead) free package • Low power CMOS technology • Operating voltages of 2.5 V to 5 V • Output Enable pin tri-states outputs • 5 V tolerant input clock • Commercial (0 to +70°C) a.




Since 2006. D4U Semicon,
Electronic Components Datasheet Search Site. (Privacy Policy & Contact)