DatasheetsPDF.com

LM358


Part Number LM358
Manufacturer Diodes
Title LOW POWER DUAL OPERATIONAL AMPLIFIER
Description Pin Assignments The LM358 series consists of two independent, high gain, internally frequency compensated operational amplifiers which were desi...
Features
• Internally frequency compensated for unity gain
• Large dc voltage gain: 100 dB
• Very low supply current drain (500μA); essentially independent of supply voltage
• Wide bandwidth (unity gain): 1MHz (temperature compensated)
• Input common-mode voltage range includes ground
• Differential input vo...

File Size 204.77KB
Datasheet LM358 PDF File






Similar Datasheet

LM35 : The LM35 series are precision integrated-circuit temperature sensors, whose output voltage is linearly proportional to the Celsius (Centigrade) temperature. The LM35 thus has an advantage over linear temperature sensors calibrated in ˚ Kelvin, as the user is not required to subtract a large constant voltage from its output to obtain convenient Centigrade scaling. The LM35 does not require any external calibration or trimming to provide typical accuracies of ± 1⁄4˚C at room temperature and ± 3⁄4˚C over a full −55 to +150˚C temperature range. Low cost is assured by trimming and calibration at the wafer level. The LM35’s low output impedance, linear output, and precise inherent calibration make.

LM35 : The LM35 series are precision integrated-circuit temperature devices with an output voltage linearlyproportional to the Centigrade temperature. The LM35 device has an advantage over linear temperature sensors calibrated in Kelvin, as the user is not required to subtract a large constant voltage from the output to obtain convenient Centigrade scaling. The LM35 device does not require any external calibration or trimming to provide typical accuracies of ±¼°C at room temperature and ±¾°C over a full −55°C to 150°C temperature range. Lower cost is assured by trimming and calibration at the wafer level. The low-output impedance, linear output, and precise inherent calibration of the LM35 device m.

LM350 : www.DataSheet4U.com LM350 3.0 A, Adjustable Output, Positive Voltage Regulator The LM350 is an adjustable three−terminal positive voltage regulator capable of supplying in excess of 3.0 A over an output voltage range of 1.2 V to 33 V. This voltage regulator is exceptionally easy to use and requires only two external resistors to set the output voltage. Further, it employs internal current limiting, thermal shutdown and safe area compensation, making it essentially blow−out proof. The LM350 serves a wide variety of applications including local, on card regulation. This device also makes an especially simple adjustable switching regulator, a programmable output regulator, or by connecting a f.

LM350 : The LM350 is an adjustable 3-terminal positive voltage regulator capable of supplying in excess of 3.0 A over an output voltage range of 1.2 V to 33 V. TO-220 (Single Gauge) 1 1. Adj 2. Output 3. Input Ordering Information Product Number LM350T Marking LM350 Package Packing Method Operating Temperature TO-220 3L (Single Gauge) Rail 0 to +125°C © 2002 Fairchild Semiconductor Corporation LM350 Rev. 1.1.0 www.fairchildsemi.com LM350 — 3-Terminal 3 A Positive Adjustable Regulator Block Diagram 3 INPUT + VREF _ VOLTAGE REFERENCE PROTECTION CIRCUITRY ADJUSTABLE 1 Figure 1. Block Diagram Q1 Q0 RSC 2 OUTPUT Absolute Maximum Ratings Stresses exceeding the absolute maximum rating.

LM350 : LM150/250 LM350 THREE-TERMINAL 3 A ADJUSTABLE VOLTAGE REGULATORS . . . . . . . GUARANTEED 3A OUTPUT CURRENT ADJUSTABLE OUTPUT DOWN TO 1.2V LINE REGULATION TYPICALLY 0.005% /V LOAD REGULATION TYPICALLY 0.1% GUARANTEED THERMAL REGULATION CURRENT LIMIT CONSTANT WITH TEMPERATURE STANDARD 3-LEAD TRANSISTOR PACKAGE TO3 K SUFFIX (Steel Can) ORDER CODE PART NUMBER TEMPERATURE RANGE PACKAGE K • • • LM150 -55 oC to + 150 oC LM250 -25 oC to + 150 oC LM350 0 oC to + 125 oC EXAMPLE: LM150K PIN CONNECTION (bottom view) Case is output March 1993 1/7 LM150-LM250-LM350 ABSOLUTE MAXIMUM RATING Symbol Ptot V I - VO Toper Power Dissipation Input-Output Voltage DIfferential Operating Junction Temperatu.

LM350 : The LM75450 and LM350 are general purpose dual peripheral drivers. The design employs two standard TTL gates (NOR in LM350, NAND in LM75450) and two totally uncommitted, hlghvoltage, high-current NPN transistors. These transistors are capable of sinking 300 mA and will withstand 30V in the OFF state. Inputs are fully DTL!TTL compatible. The LM75450 meets or exceeds the specifications for both the SN75450 and the SN75450A and is a Pln-for·pm replacement. features • High speed • High sink current 300 mA • Separate gates and transistors • Both transistors can sink 300 mA simulta- neously • Transistors withstand 30V collector to emitter in the OF F state • Input clamp diodes sr-: w oc.n schem.

LM350 : The LM35 series are precision integrated-circuit temperature devices with an output voltage linearlyproportional to the Centigrade temperature. The LM35 device has an advantage over linear temperature sensors calibrated in Kelvin, as the user is not required to subtract a large constant voltage from the output to obtain convenient Centigrade scaling. The LM35 device does not require any external calibration or trimming to provide typical accuracies of ±¼°C at room temperature and ±¾°C over a full −55°C to 150°C temperature range. Lower cost is assured by trimming and calibration at the wafer level. The low-output impedance, linear output, and precise inherent calibration of the LM35 device m.

LM350 : .

LM350-N : The LM35 series are precision integrated-circuit temperature devices with an output voltage linearlyproportional to the Centigrade temperature. The LM35 device has an advantage over linear temperature sensors calibrated in Kelvin, as the user is not required to subtract a large constant voltage from the output to obtain convenient Centigrade scaling. The LM35 device does not require any external calibration or trimming to provide typical accuracies of ±¼°C at room temperature and ±¾°C over a full −55°C to 150°C temperature range. Lower cost is assured by trimming and calibration at the wafer level. The low-output impedance, linear output, and precise inherent calibration of the LM35 device m.

LM3500 : The LM3500 is a fixed-frequency step-up DC/DC converter that is ideal for driving white LEDs for display backlighting and other lighting functions. With fully intergrated synchronous switching (no external schottky diode required) and a low feedback voltage (500mV), power efficiency of the LM3500 circuit has been optimized for lighting applications in wireless phones and other portable products (single cell Li-Ion or 3-cell NiMH battery supplies). The LM3500 operates with a fixed 1MHz switching frequency. When used with ceramic input and output capacitors, the LM3500 provides a small, low-noise, low-cost solution. Typical Application Circuit VIN 2.7V - 5.5V L 22 PH CIN 1PF Ceramic 1.1V.

LM3501 : The LM3501 is a fixed-frequency step-up DC/DC converter that is ideal for driving white LEDs for display backlighting and other lighting functions. With fully integrated synchronous switching (no external schottky diode required) and a low feedback voltage (515 mV), power efficiency of the LM3501 circuit has been optimized for lighting applications in wireless phones and other portable products (single cell Li-Ion or 3-cell NiMH battery supplies). The LM3501 operates with a fixed 1 MHz switching frequency. When used with ceramic input and output capacitors, the LM3501 provides a small, low-noise, low-cost solution. Typical Application Circuit VIN 2.7V - 5.5V Voltage Control CIN 1PF Ceramic.

LM3501 : The LM3501 is a fixed-frequency step-up DC/DC converter that is ideal for driving white LEDs for display backlighting and other lighting functions. With fully intergrated synchronous switching (no external schottky diode required) and a low feedback voltage (515 mV), power efficiency of the LM3501 circuit has been optimized for lighting applications in wireless phones and other portable products (single cell Li-Ion or 3-cell NiMH battery supplies). The LM3501 operates with a fixed 1 MHz switching frequency. When used with ceramic input and output capacitors, the LM3501 provides a small, low-noise, low-cost solution. Two LM3501 options are available with different output voltage capabilities..

LM3502 : The LM3502 is a white LED driver for lighting applications. For dual display or large single white LED string backlighting applications, the LM3502 provides a complete solution. The LM3502 contains two internal white LED current bypass FET(Field Effect Transitor) switches that are ideal for controlling dual display applications. The white LED current can be adjusted with a PWM signal directly from a microcontroller without the need of an RC filter network. With no external compensation, cycle-by-cycle current limit, over-voltage protection, and under-voltage protection, the LM3502 offers superior performance over other application specific standard product step-up white LED drivers. Feature.

LM3502 : The LM3502 is a white LED driver for lighting applications. For dual display or large single white LED string backlighting applications, the LM3502 provides a complete solution. The LM3502 contains two internal white LED current bypass FET(Field Effect Transitor) switches that are ideal for controlling dual display applications. The white LED current can be adjusted with a PWM signal directly from a microcontroller without the need of an RC filter network. With no external compensation, cycle-by-cycle current limit, over-voltage protection, and under-voltage protection, the LM3502 offers superior performance over other application specific standard product step-up white LED drivers. 1 Pleas.

LM3503 : The LM3503 is a white LED driver for lighting applications. For dual display backlighting applications, the LM3503 provides a complete solution. The LM3503 contains two internal white LED current bypass FET (Field Effect Transistor) switches. The white LED current can be adjusted with a DC voltage from a digital to analog converter or RC filtered PWM (pulse-width-modulated) signal at the Cntrl pin. With no external compensation, cycle-by-cycle current limit, output over-voltage protection, input under-voltage protection, and dynamic white LED current control capability, the LM3503 offers superior performance over other step-up white LED drivers. n n n n n n n n 80% Peak Efficiency Output .

LM3503 : The LM3503 is a white LED driver for lighting applications. For dual display backlighting applications, the LM3503 provides a complete solution. The LM3503 contains two internal white LED current bypass FET (Field Effect Transistor) switches. The white LED current can be adjusted with a DC voltage from a digital to analog converter or RC filtered PWM (pulse-width-modulated) signal at the Cntrl pin. Typical Application L 22 PH D +- VSUPPLY CIN 4.7 PF Sw VIN VOUT1 Cntrl En1 En2 VOUT2 LM3503-44 Fb AGND PGND Logic Voltage Signal Inputs MAIN: 2 to 5 LEDs COUT 1 PF SUB: 2 to 5 LEDs R1 1 Please be aware that an important notice concerning availability, standard warranty, and use in cri.

LM3508 : The LM3508 is a synchronous boost converter (no external Schottky diode required) that provides a constant current output. It is designed to drive up to 4 series white LEDs at 30mA from a single-cell Li-Ion battery. A single low power external resistor is used to set the maximum LED current. The LED current can be adjusted by applying a PWM signal of up to 100kHz to the DIM pin. Internal soft-start circuitry is designed to eliminate high in-rush current at start-up. For maximum safety, the device features an advanced short-circuit protection when the output is shorted to ground. Additionally, over-voltage protection and an 850kHz switching frequency allow for the use of small, low-cost outpu.




Since 2006. D4U Semicon,
Electronic Components Datasheet Search Site. (Privacy Policy & Contact)