DatasheetsPDF.com

AL1663 Datasheet PDF


Part Number AL1663
Manufacturer Diodes
Title UNIVERSAL FLYBACK AND BUCK-BOOST SINGLE STAGE DIMMABLE LED CONTROLLER
Description The AL1663/AL1663R is a high performance single stage Flyback and Buck-boost controller, targeting dimmable LED lighting application. It is a prim...
Features ...

File Size 409.22KB
Datasheet AL1663 PDF File








Similar Ai Datasheet

AL1 : page 1 2 3 AL1 sheet 44 45 FP date 1935 1935 2000.01.30 .

AL1 : page 1 2 3 4 AL1 sheet 1 2 2 FP date 1959.12.12 1947.12.01 1953.12.12 1999.06.26 .

AL1 : .

AL1015 : .

AL103 : The AL103 is an eight-port 10/100 Mbit/s dual speed Ethernet switch. A low-cost Fast Ethernet switch can be implemented using the AL103 with low-cost SGRAM. The AL103 also supports VLAN and multiple port aggregation trunks. 10/100 MAC Switch Controller Buffer Manager 10/100 MAC 10/100 MAC High Speed Switch Fabric Address Control 10/100 MAC 10/100 MAC Address Table 10/100 MAC EEPROM Interface 10/100 MAC 10/100 MAC Figure 1 System Block Diagram Reference Only / Allayer Communications AL103 Revision 1.0 This document contains proprietary information which shall not be reproduced, transferred to other documents, or used for any other purpose without the prior written consent of .

AL106-84 : The AL106-84 is a high dynamic range amplifier for 900 MHz applications. The amplifier has 19 dBm output power, high input intercept point (IIP3) of 18 dBm, low noise figure of 1.8 dB and operates from a single positive bias of +5 V. External resistor sets the amplifier drain current. No external matching elements are required. As a low noise driver amplifier it is ideally suited for 900 MHz wireless base station applications. The AL106-84 is encapsulated in SOIC-8 package with slug for improved heat dissipation and reliability. 0.106 (2.65 mm) ± 0.005 (0.12 mm) Electrical Specifications at 25°C Parameter1 Small Signal Gain Input P-1dB Input IIP3 Noise Figure Reverse Isolation Input VSWR O.

AL106-84LF : The AL106-84LF is a high dynamic range amplifier for 900 MHz applications. The amplifier has 19 dBm output power, high input intercept point (IIP3) of 18 dBm, low noise figure of 1.8 dB and operates from a single positive bias of 5 V. External resistor sets the amplifier drain current. No external matching elements are required. As a low noise driver amplifier, it is ideally suited for 900 MHz wireless base station applications. The AL106-84LF is encapsulated in an SOIC-8 package with slug for improved heat dissipation and reliability. NEW Skyworks offers lead (Pb)-free, RoHS (Restriction of Hazardous Substances)-compliant packaging. Pin Out RF In GN.

AL108-338 : The AL108-338 is an LNA designed for use in 3.2–3.8 GHz WLAN applications. The leadless surface mount package houses a GaAs PHEMT MMIC that yields low noise, good 50 Ω match, high gain and powerful P1 dB performance. Powered by a single 5 V supply, it also offers a 10 dB gain adjustment range. Absolute Maximum Ratings Characteristic RF Input Power Bias Voltage Storage Temperature Operating Temperature Value 20 dBm 6 V Max. -40 to +85°C -65 to +150°C Electrical Specifications at 25°C (3.2–3.8 GHz) Control Voltage = 0 V, Bias Voltage = 5 V, ID = 85 mA Parameter Gain Output P-1 dB Output IP3 Noise Figure Reverse Isolation Input VSWR Output VSWR 50 Ω System 50 Ω System 30 PIN = -30 dBm 18 Cond.

AL1101 : The AL1101 is a 24-bit sigma-delta stereo analog-to-digital audio converter using Wavefront’s ClockEZ™ technology. With dynamic range of 107dB, simplified interface, and low power consumption, the AL1101 (and its companion AL1201 DAC) is a best-in-class solution for 44.1kHz and 48kHz operation. Features 24-bit conversion 107dB dynamic range (A-wt) 0.002% THD (input = -1dBFS) ClockEZ™ circuitry: internal PLL derives all necessary timing signals from one external Fs clock 64X oversampling, 5th order 1-bit modulator   ¡ Applications Digital Mixing Boards Signal Processors Digital Effects Boxes Digital Recorders Computer Sound Boards Karaoke Systems Car Audio Systems 64:1 linear-phase digital.

AL1101 : The AL1101 stereo ADC is a high performance 24-bit analog to digital audio converter. Dynamic range is 107dB (Aweighted). The sensible pinout and easy user interface are unprecedented. The part has an internal high quality phaselocked loop that eliminates the need for external high frequency clocks. Features G G G G G G G G G G G G 24 bit conversion 107dB dynamic range (A-wt) .002% THD (input=-1dBFS) 64X oversampling, 5th order 1 bit ∆-Σ modulator 64:1 linear phase digital decimation filter sample rate variable from 24kHz to 55kHz digital high-pass filter total power consumption 110mW (Fs=48kHz) internal PLL derives all necessary timing signals from one external Fs clock serial output bit.

AL1201 : The AL1201 stereo DAC is a high performance 24-bit digital to analog audio converter. Dynamic range is 107dB (Aweighted). The sensible pinout and easy user interface are unprecedented. The part contains an internal high quality phaselocked loop that eliminates the need for external high frequency clocks. Features G G G G G G G G G G G G G 24 bit conversion 107dB dynamic range (A-wt) .003% THD at full scale output linear phase analog outputs 128x over sampling, 5th order 1 bit ∆-Σ modulator 2nd order switched cap filter and 2nd order continuous-time filter on chip sample rate variable 24kHz-55kHz selectable deemphasis (15us/50µs at Fs=44.1kHz) total power consumption 170mW (Fs=48kHz) inter.

AL1213A : The AL1213A is a CMOS 8-bit D/A converter for general application. This digital to analog converter consists of a R-2R ladder block & an Op amp block. Its maximum conversion rate is 0.5MSPS. FEATURES • • • • • • • Resolution : 8-bit Differential Linearity Error : ± 0.4 LSB (TYP) Maximum Conversion Rate : 0.5MSPS Supply Voltage : 5V External Voltage Reference Single Voltage Output : 0V to 5V Operation Temperature Range : 0 to 70°C TYPICAL APPLICATIONS • • • DVD CDP General purpose Digital to Analog Conversion FUNCTIONAL BLOCK DIAGRAM www.DataSheet.net/ VRT D[7] D[6] D[5] D[4] D[3] D[2] D[1] D[0] VRB PD R2R LADDER OP AMP VOUT Rev 2.1 (Apr. 2002) No responsibility is assumed by SEC for its.

AL128 : _______________ 4 4.0 Pinout Diagram __________________ 5 5.0 Pin Definition and Description ______ 6 6.0 Functional Description ___________ 12 6.1 Input Interface ___________________ 12 6.1.1 24-bit RGB_______________________ 13 6.1.2 VAFC___________________________ 13 6.1.3 Feature Connector _________________ 14 6.1.4 Sampling (Pixel) Clock _____________ 14 9.0 Board Design and Layout Considerations ______________________40 9.1 Grounding_______________________ 40 9.2 Power Planes_____________________ 40 9.3 Power Supply Decoupling __________ 40 9.4 Digital Signal and Clock Interconnect 40 9.5 Analog Signal Interconnect _________ 41 9.6 Component Placement _____________ 41 10.0 Mechanical.

AL128 : The AL128 PC to TV scan converter chip accepts graphic data up to 1024x768 resolution from PC and Macintosh graphics controllers and converts it into high quality NTSC or PAL TV signals. This new chip is pin-to-pin compatible with the AverLogic AL100 but provides analog RGB output for SCART implementation. Field Memory /PWRDN PAL /RESET INTYPE RGB MEMCONF Memory Management Unit ADEN Digital R, G, B 8-bit ADC 8-bit ADC 8-bit ADC Memory Configuration Setup MEMTYPE MWENH MWRST MWENL MWCLK MRRST MRCLK MREN MQ MD R G B VRT VRB GCLK GHSDIV GHSYNC GVSYNC MUX Digital Video Processor Digital TV Encoder 9-bit DAC 9-bit DAC 9-bit DAC AY / R AC / G ACMP / B RSET Video Memory VREF C.

AL13-36 : page 1 2 3 4 5 6 7 AL13-36 sheet 1 2 3 4 A B FP date 1957.03.03 1957.03.03 1957.03.03 1957.03.03 1957.03.03 1957.03.03 2000.03.06 .

AL1401A : The AL1401A OptoGen interface encodes four stereo pairs (8 channels) of digital audio and produces a single datastream suitable for transmission according to the industry-standard ADAT Optical protocol (U.S. patent number 5,297,181). With an internal PLL to generate all needed clock signals, the AL1401A requires only wordclock (Fs) for proper operation. A companion decoder, the OptoRec™, is also available. AL1402 Features Compatible with ADAT Type I and II formats 4 stereo pairs as inputs using standard DAC formats 4 user bit inputs to transmit time-code, MIDI data, etc. Internal PLL generates all required clocks from wordclock Applications Digital Mixing Boards Signal Processors Digital E.

AL1402 : The AL1402 OptoRec interface is designed to decode the ADATâ optical data stream and produce four stereo pairs of audio data. Alesis ADATâ U.S. patent number 5,297,181. Use of this product requires a license agreement between manufacturer and Alesis Studio Electronics. Details and agreement information are available upon request from Alesis Semiconductor or Alesis Studio Electronics. Features G G G G G Compatible with ADATâ Type I and II formats 4 stereo pairs as outputs using standard ADC formats 4 user bit outputs to receive time-code, MIDI data, etc. Internal PLL generates required clocks from optical data. Word Clock input to synchronize outputs to user’s system. Applications G Rec.




Since 2006. D4U Semicon,
Electronic Components Datasheet Search Site. (Privacy Policy & Contact)