DatasheetsPDF.com

TR1210


Part Number TR1210
Manufacturer Thomson-CSF
Title Thyristor
Description ...
Features ...

File Size 427.70KB
Datasheet TR1210 PDF File








Similar Ai Datasheet

TR1210 : ■ Thin Film Chip Resistor — TR Series ■ Construction 1 Alumina Substrate 2 Bottom Electrode (Ag) 3 Top Electrode (Ag/Pd) 4 Barrier Layer (Ni) 5 External Electrode (Sn) 6 Resistor Layer (NiCr) 7 Primary Overcoat (Epoxy) 8 Marking ■ Application — Medical equipments, Military equipments — Converters — Consumer products — Communication devices — Measurement instruments — Printers ■ Features — Tight tolerance from ±0.01%,±0.1%, ±0.25%, ±0.5%, ±1% — Thin film Ni / Cr / Si Resistor — Low T.C.R. ±10ppm, ±25ppm, ±50ppm TEL: 886-7-8116611 FAX: 886-7-8115533 E-mail: service@everohms.com http://www.everohms.com ● Low Ohm Thin Film Chip Resistor ■ Type Dimension TR0805 / TR1206 / TR1210 TR1812 / .

TR1210 : 2N1842-2N1850A TR1010-TR9010 High-reliability discrete products and engineering services since 1977 SILICON CONTROLLED RECTIFIER FEATURES  Available as “HR” (high reliability) screened per MIL-PRF-19500, JANTX level. Add “HR” suffix to base part number.  Available as non-RoHS (Sn/Pb plating), standard, and as RoHS by adding “-PBF” suffix. MAXIMUM RATINGS Rating RMS on-state current @ TC = 80°C Mean on-state current @ TC = 80°C Non-repetitive surge peak on-state current @ TJ ≤ 125°C t = 8.3ms t = 10ms I2t for fusing @ TJ ≤ 125°C, t = 10ms Critical rate of rise of on-state current Operating junction temperature range Storage temperature range Symbol IT(RMS) IT(AV) ITSM I2t di/dt.

TR1218 : ■ Thin Film Chip Resistor — TR Series ■ Construction 1 Alumina Substrate 2 Bottom Electrode (Ag) 3 Top Electrode (Ag/Pd) 4 Barrier Layer (Ni) 5 External Electrode (Sn) 6 Resistor Layer (NiCr) 7 Primary Overcoat (Epoxy) 8 Marking ■ Application — Medical equipments, Military equipments — Converters — Consumer products — Communication devices — Measurement instruments — Printers ■ Features — Tight tolerance from ±0.01%,±0.1%, ±0.25%, ±0.5%, ±1% — Thin film Ni / Cr / Si Resistor — Low T.C.R. ±10ppm, ±25ppm, ±50ppm TEL: 886-7-8116611 FAX: 886-7-8115533 E-mail: service@everohms.com http://www.everohms.com ● Low Ohm Thin Film Chip Resistor ■ Type Dimension TR0805 / TR1206 / TR1210 TR1812 / .

TLE9883 : MOTIX™ TLE989x/TLE988x Microcontroller with CAN-FD and NFET Driver for BLDC Applications AK step Features • 32-bit Arm® Cortex®*-M3 core at up to 60 MHz • Single power supply from 5.5 V to 28 V Arm® Cortex-M3 Debug NVIC Compute DMA FLASH0 FLASH1 SRAM ROM • FLASH0 up to 32 KB, FLASH1 up to 256 KB with EEPROM emulation, RAM up to 32 KB • 1x CAN-FD protocol handler and transceiver • 2x UART (with LIN support), 2x SSC • 3-phase bridge driver with charge pump and PWM generation (CCU7) and safe switch off path • 1x low side shunt current sense amplifier and comparator • 3x BEMF comparators • 1x 12-bit ADC with 19 inputs and 1x 10-bit ADC with 14 inputs System Power Management Unit (PMU) Mon.

TLE9881 : MOTIX™ TLE989x/TLE988x Microcontroller with CAN-FD and NFET Driver for BLDC Applications AK step Features • 32-bit Arm® Cortex®*-M3 core at up to 60 MHz • Single power supply from 5.5 V to 28 V Arm® Cortex-M3 Debug NVIC Compute DMA FLASH0 FLASH1 SRAM ROM • FLASH0 up to 32 KB, FLASH1 up to 256 KB with EEPROM emulation, RAM up to 32 KB • 1x CAN-FD protocol handler and transceiver • 2x UART (with LIN support), 2x SSC • 3-phase bridge driver with charge pump and PWM generation (CCU7) and safe switch off path • 1x low side shunt current sense amplifier and comparator • 3x BEMF comparators • 1x 12-bit ADC with 19 inputs and 1x 10-bit ADC with 14 inputs System Power Management Unit (PMU) Mon.

TLE9893 : MOTIX™ TLE989x/TLE988x Microcontroller with CAN-FD and NFET Driver for BLDC Applications AK step Features • 32-bit Arm® Cortex®*-M3 core at up to 60 MHz • Single power supply from 5.5 V to 28 V Arm® Cortex-M3 Debug NVIC Compute DMA FLASH0 FLASH1 SRAM ROM • FLASH0 up to 32 KB, FLASH1 up to 256 KB with EEPROM emulation, RAM up to 32 KB • 1x CAN-FD protocol handler and transceiver • 2x UART (with LIN support), 2x SSC • 3-phase bridge driver with charge pump and PWM generation (CCU7) and safe switch off path • 1x low side shunt current sense amplifier and comparator • 3x BEMF comparators • 1x 12-bit ADC with 19 inputs and 1x 10-bit ADC with 14 inputs System Power Management Unit (PMU) Mon.

TLE9891 : MOTIX™ TLE989x/TLE988x Microcontroller with CAN-FD and NFET Driver for BLDC Applications AK step Features • 32-bit Arm® Cortex®*-M3 core at up to 60 MHz • Single power supply from 5.5 V to 28 V Arm® Cortex-M3 Debug NVIC Compute DMA FLASH0 FLASH1 SRAM ROM • FLASH0 up to 32 KB, FLASH1 up to 256 KB with EEPROM emulation, RAM up to 32 KB • 1x CAN-FD protocol handler and transceiver • 2x UART (with LIN support), 2x SSC • 3-phase bridge driver with charge pump and PWM generation (CCU7) and safe switch off path • 1x low side shunt current sense amplifier and comparator • 3x BEMF comparators • 1x 12-bit ADC with 19 inputs and 1x 10-bit ADC with 14 inputs System Power Management Unit (PMU) Mon.

T-51750GD065J-LW-ANN : .

TC358771XBG : TC358771XBG/TC358772XBG CMOS Digital Integrated Circuit Silicon Monolithic TC358771XBG/TC358772XBG Mobile Peripheral Devices Overview TC358771XBG The TC358771XBG/TC358772XBG Functional Specification adds back light engine to function of TC358775XBG. TC358771XBG/TC358772XBG is the follow-up chip of TC358774XBG/TC358775XBG, which: 1. Is pin compatible to TC358774XBG/TC358775XBG 2. Exhibit LVDS Tx block operates at 1.8V @135 MHz to reduce operation power 3. Back light engine controls the back light level automatically with ambient light and adjusts image contents. TC358772XBG The primary function of this chip is DSI-to-LVDS Bridge, enabling video streaming output over DSI link to drive.

T110B476K006AS : TANTALUM HERMETICALLY SEALED / AXIAL — MIL-PRF-39003 T110 SERIES — POLAR TYPE, T212 (CSR13) KEMET standard hermetic sealed T110 Series are desirable for use in high humidity environments. They are ruggedly built, designed for miniaturized circuitry, and are especially suited for coupling, bypass, filtering and R-C timing circuits. They exhibit excellent stability, extremely low DC leakage current, dissipation factor, and ESR/impedance over a wide temperature and frequency range. Available in standard EIA capacitance values from .0047-330 µF in ±20%, ±10%, and ±5% tolerances and working voltages from 6-125 VDC. Higher CV values in comparable case sizes are available in KEMET T140 Series. Ref.




Since 2006. D4U Semicon,
Electronic Components Datasheet Search Site. (Privacy Policy & Contact)