DatasheetsPDF.com

3KP110CA-G Datasheet PDF


Part Number 3KP110CA-G
Manufacturer Comchip
Title 3000W Transient Voltage Suppressor
Description 3000W Transient Voltage Suppressor 3KP-G Series Stand-off Voltage: 5.0 ~ 440V Power Dissipation: 3000 Watts RoHS Device Features -Glass passivat...
Features -Glass passivated chip. -Low leakage. -Uni and Bidirection unit. -Excellent clamping capability. -Very Fast response time. Mechanical Data -Case: Molded plastic R-6 -Epoxy: UL 94V-0 rate flame retardant. -Lead: Solderable per MIL-STD-202, method 208 guranteed. -Polarity: Color band denotes cathode e...

File Size 182.74KB
Datasheet 3KP110CA-G PDF File








Similar Ai Datasheet

3KP110C : 3KP SERIES 3000 WATT PEAK POWER TRANSIENT VOLTAGE SUPPRESSORS FEATURES * 3000 Watts Surge Capability at 1ms * Excellent clamping capability * Low zener impedance * Fast response time: Typically less than 1.0ps from 0 volt to BV min. * Typical IR less than 1 A above 10V VOLTAGE RANGE 5.0 to 440 Volts 3000 Watts Peak Power R-6 .360(9.1) .340(8.6) DIA. 1.0(25.4) MIN. MECHANICAL DATA * Case: Molded plastic * Epoxy: UL 94V-0 rate flame retardant * Lead: Axial leads, solderable per MIL-STD-202, method 208 guranteed * Polarity: Color band denotes cathode end * Mounting position: Any .360(9.1) .340(8.6) .052(1.3) .048(1.2) DIA. 1.0(25.4) MIN. Dimensions in inches and (millimeters) MAXIM.

3KP110C : The 3KP series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features u Glass passivated chip junction in P600 Package u Low leakage u Uni and Bidirectional unit u Excellent clamping capability u 3000W Peak power capability at 10 × 1000µs waveform Repetition rate (duty cycle):0.01% u Fast response time: typically less than 1.0ps from 0 Volts to VBR min u Typical IR less than 5μA above 12V. u High Temperature soldering: 260°C/40 seconds at terminals u Typical maximum temperature coefficient ΔVBR = 0.1% × VBR@25°C× ΔT u Plastic package has Underwriters Laboratory Flammability 94V-0 u Matte tin.

3KP110C : LITE-ON SEMICONDUCTOR GLASS PASSIVATED UNIDIRECTIONAL AND BIDIRECTIONAL TRANSIENT VOLTAGE SUPPRESSORS 3KP SERIES REVERSE VOLTAGE - 5.0 to 220 Volts POWER DISSIPATION - 3000 WATTS FEATURES Glass passivated chip Low leakage Uni and Bidirectional unit Excellent clamping capability The plastic material has U/L recognition 94V-O Fast response time MECHANICAL DATA Case : Molded Plastic Marking : Unidirectional - type number and cathode band Bidirectional - type number only Weight : 0.07 ounces, 2.1 grams R-6 AB A C D R-6 Dim. Min. Max. A 25.4 B 8.60 9.10 C 1.22 1.32 D 8.60 9.10 All Dimensions in millimeter MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25℃ ambient temperature unl.

3KP110C : .

3KP110C : SAMYANG ELECTRONICS SAM YANG 3KP5.0 --- 3KP190CA TRANSIENT VOLTAGE SUPPRESSOR BREAKDOWN VOLTAGE: 5.0 --- 190 V PEAK PULSE POWER: 3000 W ■ Dimension ■ Specification R-6 Dim Millimeters Inches Min Max Min Max A 25.4 --- 1.000 --- B 8.6 9.1 0.340 0.360 C 1.2 1.3 0.048 0.052 D 8.6 9.1 0.340 0.360 Type Number (Uni) 3KP5.0 3KP5.0A 3KP6.0 3KP6.0A 3KP6.5 3KP6.5A 3KP7.0 3KP7.0A 3KP7.5 3KP7.5A 3KP8.0 3KP8.0A 3KP8.5 3KP8.5A 3KP9.0 3KP9.0A 3KP10 3KP10A 3KP11 3KP11A 3KP12 3KP12A 3KP13 3KP13A (Bi) 3KP5.0C 3KP5.0CA 3KP6.0C 3KP6.0CA 3KP6.5C 3KP6.5CA 3KP7.0C 3KP7.0CA 3KP7.5C 3KP7.5CA 3KP8.0C 3KP8.0CA 3KP8.5C 3KP8.5CA 3KP9.0C 3KP9.0CA 3KP10C 3KP10CA 3KP11C 3KP11CA 3KP12C 3KP12CA 3KP13C 3KP13CA.

3KP110C : ® WON-TOP ELECTRONICS Features  Glass Passivated Die Construction  3000W Peak Pulse Power Dissipation  5.0V – 440V Standoff Voltage  Uni- and Bi-Directional Versions Available  Excellent Clamping Voltage  Typical Response Time 1nS  Plastic Case Material has UL Flammability Classification Rating 94V-0 Mechanical Data  Case: P-600, Molded Plastic  Terminals: Plated Leads Solderable per MIL-STD-202, Method 208  Polarity: Cathode Band Except Bi-Directional  Weight: 2.10 grams (approx.)  Mounting Position: Any  Marking: Type Number  Lead Free: For RoHS / Lead Free Version, Add “-LF” Suffix to Part Number, See Page 6 3KP SERIES 3000W TRANSIENT VOLTAGE SUPPRESSOR Pb AB A D P-600.

3KP110C : Features ! Glass Passivated Die Construction ! 3000W Peak Pulse Power Dissipation ! 5.0V – 170V Standoff Voltage ! Uni- and Bi-Directional Versions Available ! Excellent Clamping Capability ! Fast Response Time ! Plastic Case Material has UL Flammability Classification Rating 94V-O Mechanical Data ! Case: JEDEC P-600 Molded Plastic ! Terminals: Axial Leads, Solderable per MIL-STD-750, Method 2026 ! Polarity: Cathode Band or Cathode Notch ! Marking: Unidirectional – Device Code and Cathode Band Bidirectional – Device Code Only ! Weight: 2.10 grams (approx.) 3KP Series 3000W Transient Voltage Suppressors P-600 Dimensions in millimeters Maximum Ratings and Electrical Characteristics @TA=25°C .

3KP110CA : 3KP SERIES Transient Voltage Suppressors (TVS) Data Sheet Features ■ Glass passivated junction ■ Low incremental surge resistance. ■ Excellent clamping capability ■ 3000W peak pulse power capability at 10/1000μs waveform, repetition rate (duty cycle): 0.01% ■ Fast response time ■ Typical IR less than 2μA above 10V. ■ High Temperature soldering guaranteed: 265℃/10 seconds/.375″, (9.5mm) lead length, 5lbs (2.3kg) tension ■ Plastic package has underwriters laboratory flammability 94V-0 ■ Meets MSL level 1, per J-STD-020. ■ Safety certification: UL: E244458 Mechanical Data ■ Case: Moulded plastic over glass passivated junction ■ Terminal: Plated Axial leads, solderable per MIL-STD-750, Method.

3KP110CA : The 3KP series of high current uni/bi-directional transient suppressors are designed for A.C. line protection and high power DC bus clamping applications. These devices offer uni/bi-directional port protection from 5.0 volts to 220 volts. They provide a clamping voltage lower than the avalanche voltage. Therefore, any voltage rise due to increased current conduction is contained to a minimum, providing the best possible protection level. They can also be connected in series and/or parallel to create very high capacity protection solutions. FEATURES:  Low zener impedance.  Excellent clamping capability.  JEDEC R-6/P-600 Molded Plastic.  Repetition rate (duty cycle): 0.01%.  Color band .

3KP110CA : The 3KP series of high current uni/bi-directional transient suppressors are designed for A.C. line protection and high power DC bus clamping applications. These devices offer uni/bi-directional port protection from 5.0 volts to 220 volts. They provide a clamping voltage lower than the avalanche voltage. Therefore, any voltage rise due to increased current conduction is contained to a minimum, providing the best possible protection level. They can also be connected in series and/or parallel to create very high capacity protection solutions. FEATURES:  Low zener impedance.  Excellent clamping capability.  JEDEC R-6/P-600 Molded Plastic.  Repetition rate (duty cycle): 0.01%.  Color band .

3KP110CA : Value Unit Conditions VWM PPPM PD IFSM VF Maximum Recurrent Peak Reverse Voltage Peak Pulse Power Dissipati.

3KP110CA : TRANSIENT VOLTAGE SUPPRESSOR RoHS 3KP5.0A~3KP220CA 3000 Watts FEATURES • Glass passivated chip junction • Available in uni-directional & bi-directional • 3000W surge capability at 10×100 s waveform, duty cycle: 0.01%   • Excellent clamping capability • Low incremental surge resistance • Fast response time: Typically less than 1.0ps from 0 volts to BV min • Typical IR less 2 A above 12V • High temperature soldering capability: 260℃/40 seconds/.375” (9.5mm) Lead length/5lbs. (2.3kg) tension Voltage Range 5.0 to 220 Volts 3000 Watts Peak Power 7.0 Watts Steady State MECHANICAL DATA • Molded plastic body (UL 94V-0 rated) • Axial leads, solderable per MIL-STD 202, Method 208 • Color band den.

3KP110CA : 4 SHANGHAI SEMITECH SEMICONDUCTOR CO., LTD 3KP Series 3000W Axial Leaded Transient Voltage Suppressors . Features l Peak power dissipation 3000W @10 x 1000 us Pulse l Low profile package. l Excellent clamping capability. l Glass passivated junction. l Fast response time: typically less than 1ps from 0 Volts to BV min l Typical IR less than 2uA when VBR min above 12V. l IEC 61000-4-2 ESD 30KV(Air), 30KV(Contact) l ESD protection of data lines in accordance with IEC 61000-4-2 l EFT protection of data lines in accordance with IEC 61000-4-4 l Halogen free and RoHS compliant l Lead-free finish R-6 Bi-directional Cathode Anode Uni-directional Mechanical Characteristics l CASE: R-6 Molded Pl.

3KP110CA : Axial Leaded Transient Voltage Suppressor 3KP SERIES Formosa MS List List. 1 Package outline. 2 Features 2 Mechanical data. 2 Maximum ratings 2 Electrical characteristics. 3~4 Rating and characteristic curves.....

3KP110CA : 3KP SERIES 3000 WATT PEAK POWER TRANSIENT VOLTAGE SUPPRESSORS FEATURES * 3000 Watts Surge Capability at 1ms * Excellent clamping capability * Low zener impedance * Fast response time: Typically less than 1.0ps from 0 volt to BV min. * Typical IR less than 1 A above 10V VOLTAGE RANGE 5.0 to 440 Volts 3000 Watts Peak Power R-6 .360(9.1) .340(8.6) DIA. 1.0(25.4) MIN. MECHANICAL DATA * Case: Molded plastic * Epoxy: UL 94V-0 rate flame retardant * Lead: Axial leads, solderable per MIL-STD-202, method 208 guranteed * Polarity: Color band denotes cathode end * Mounting position: Any .360(9.1) .340(8.6) .052(1.3) .048(1.2) DIA. 1.0(25.4) MIN. Dimensions in inches and (millimeters) MAXIM.

3KP110CA : The 3KP series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features u Glass passivated chip junction in P600 Package u Low leakage u Uni and Bidirectional unit u Excellent clamping capability u 3000W Peak power capability at 10 × 1000µs waveform Repetition rate (duty cycle):0.01% u Fast response time: typically less than 1.0ps from 0 Volts to VBR min u Typical IR less than 5μA above 12V. u High Temperature soldering: 260°C/40 seconds at terminals u Typical maximum temperature coefficient ΔVBR = 0.1% × VBR@25°C× ΔT u Plastic package has Underwriters Laboratory Flammability 94V-0 u Matte tin.

3KP110CA : TRANSIENT VOLTAGE SUPPRESSOR ZEN ELECTRONIC PARTNO.3KP5.0A(CA)-3KP220A(CA) The 3KP series of high current uni/bi-directional transient suppressors are designed for A.C. line protection and high power DC bus clamping applications. These devices offer uni/bi-directional port protection from 5.0 volts to 220 volts. They provide a clamping voltage lower than the avalanche voltage. Therefore, any voltage rise due to increased current conduction is contained to a minimum, providing the best possible protection level. They can also be connected in series and/or parallel to create very high capacity protection solutions. Low zener impedance. Excellent clamping capability. JEDEC R-6/P-600 Molded.




Since 2006. D4U Semicon,
Electronic Components Datasheet Search Site. (Privacy Policy & Contact)