DatasheetsPDF.com

LCE13A


Part Number LCE13A
Manufacturer Eris
Title Transitent Voltage Suppressors
Description LCE Series Axial Lead Transitent Voltage Suppressors Features ‧Glass passivated chip ‧1500W peak pulse power capability with a 10/1000 μs wavefo...
Features ‧Glass passivated chip ‧1500W peak pulse power capability with a 10/1000 μs waveform, repetitive rate (duty cycle): 0.01% ‧Low leakage ‧Excellent clamping capability ‧Very fast response time ‧RoHS compliant Mechanical Data ‧Case: Molded plastic ‧Epoxy: UL 94V-0 rate flame retardant ‧Lead: Solderabl...

File Size 378.67KB
Datasheet LCE13A PDF File








Similar Ai Datasheet

LCE13 : The LCE series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Uni-directional Features u Glass passivated chip u 1500W peak pulse power capability with a 10/1000µs waveform, repetitive rate (duty cycle): 0.01% u Low leakage u Excellent clamping capability u Very fast response time u RoHS compliant Applications TVS devices are ideal for the protection of I/O interfaces, VCC bus and other vulnerable circuits used in Telecom, Computer, Industrial and Consumer electronic applications. Bi-directional Maximum Ratings (TA=25℃ unless otherwise noted) Parameter Peak Pulse Power Dissipation with a.

LCE13 : .

LCE13 : LCE6.5 THRU LCE28A SERIES LOW CAPACITANCE TRANSZORB™ TRANSIENT VOLTAGE SUPPRESSOR Stand-off Voltage - 6.5 to 28 Volts Schematic Transient Voltage Suppressor Peak Pulse Power - 1500 Watts FEATURES ♦ Plastic package has Underwriters Laboratory Flammability Classification 94V-0 ♦ Glass passivated junction ♦ 1500W peak pulse power capability with a 10/1000µs waveform, repetition rate (duty cycle): 0.05% ♦ Excellent clamping capability ♦ Low incremental surge resistance ♦ Fast response time: typically less than 5.0ns from 0 volts to V(BR) ♦ Ideal for data line applications ♦ High temperature soldering guaranteed: 265°C/10 seconds, 0.375" (9.5mm) lead length, 5lbs. (2.3 kg) tension Case Style 1..

LCE13 : LCE SERIES VBR : 6.5 - 90 Volts PPK : 1500 Watts FEATURES : * 1500W Peak Pulse Surge reverse capability on 10/1000µs waveform * Excellent clamping capability * Low incremental surge resistance * Fast response time : typically less than 5.0 ns from 0 volts to BV LOW CAPACITANCE TRANSIENT VOLTAGE SUPPRESSOR DO-201 0.21 (5.33) 0.19 (4.83) 1.00 (25.4) MIN. 0.375 (9.53) 0.285 (7.24) MECHANICAL DATA * Case : DO-201AD Molded plastic * Epoxy : UL94V-O rate flame retardant * Lead : Axial lead solderable per MIL-STD-202, method 208 guaranteed * Polarity : Color band denotes positive end on the Transorb (cathode) * Mounting position : Any * Weight : 0.93 gram 0.042 (1.07) 0.038 (0.97) 1.00 (25.4).

LCE13 : LCE Series Axial Lead Transitent Voltage Suppressors Features ‧Glass passivated chip ‧1500W peak pulse power capability with a 10/1000 μs waveform, repetitive rate (duty cycle): 0.01% ‧Low leakage ‧Excellent clamping capability ‧Very fast response time ‧RoHS compliant Mechanical Data ‧Case: Molded plastic ‧Epoxy: UL 94V-0 rate flame retardant ‧Lead: Solderable per MIL-STD-750, method 2026 guranteed ‧Polarity: Color band denotes TVS cathode end ‧Mounting position: Any Maximum Ratings (TA=25°C unless otherwise noted) Parameter Symbol Peak power dissipation with a 10/1000μs waveform(1) Power dissipation on infinite heatsink at TL=75oC (Fig.2) Peak pulse current with a 10/1000μs waveform .

LCE13 : LCE series LCE SERIES (1500 WATT) AXIAL TRANSIENT VOLTAGE SUPPRESSORS (LOW CAPACITANCE DEVICE) Device for data line interface circuit protection, the LCE series offers low shunt capacitance to prevent signal degradation. These devices can be used across transmission lines with signal levels up to 100MHz. For bi-directional applications, two LCE suppressors are required, connected anti-parallel with respect to each other, across the circuit to be protected. FEATURES G Stand-off voltage range 6.5 to 90 Volts G Uni-directional G Glass passivated junction G Low capacitance: 100pF (max) G Low zener impedance G 100% surge tested MAXIMUM RATING G Peak Pulse Power (Ppk): 1500 Watts (10 x 1000µs)@25.

LCE13 : MDE Semiconductor, Inc. 78-150 Calle Tampico, Unit 210, La Quinta, CA., USA 92253 Tel : 760-564-8656 • Fax : 760-564-2414 1-800-831-4881 Email: sales@mdesemiconductor.com Web: www.mdesemiconductor.com LCE SERIES LOW CAPACITANCE TRANSIENT VOLTAGE SUPPRESSOR STAND-OFF VOLTAGE- 6.5 TO 28 Volts 1500 Watt Peak Pulse Power FEATURES • Plastic package has Underwriters Laboratory Flammability Classification 94 V-O • Glass passivated junction • 1500W Peak Pulse Power capability on 10/1000 µs waveform • Glass passivated junction • Low incremental surge resistance • Excellent clamping capability • Repetition rate (duty cycle): 0.05% • Fast response time: typically less than 5.0 ns from 0 volts to V(BV) .

LCE130 : .

LCE130A : .

LCE13A : LCE series LCE SERIES (1500 WATT) AXIAL TRANSIENT VOLTAGE SUPPRESSORS (LOW CAPACITANCE DEVICE) Device for data line interface circuit protection, the LCE series offers low shunt capacitance to prevent signal degradation. These devices can be used across transmission lines with signal levels up to 100MHz. For bi-directional applications, two LCE suppressors are required, connected anti-parallel with respect to each other, across the circuit to be protected. FEATURES G Stand-off voltage range 6.5 to 90 Volts G Uni-directional G Glass passivated junction G Low capacitance: 100pF (max) G Low zener impedance G 100% surge tested MAXIMUM RATING G Peak Pulse Power (Ppk): 1500 Watts (10 x 1000µs)@25.

LCE13A : The LCE series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Uni-directional Features u Glass passivated chip u 1500W peak pulse power capability with a 10/1000µs waveform, repetitive rate (duty cycle): 0.01% u Low leakage u Excellent clamping capability u Very fast response time u RoHS compliant Applications TVS devices are ideal for the protection of I/O interfaces, VCC bus and other vulnerable circuits used in Telecom, Computer, Industrial and Consumer electronic applications. Bi-directional Maximum Ratings (TA=25℃ unless otherwise noted) Parameter Peak Pulse Power Dissipation with a.

LCE13A : Value V WM Stand-Off Voltage PPPM IPPM CJ Peak Pulse Power Dissipation on 10/1000 us waveform(Note) Peak Pulse current on 10/1000 us waveform Max. Junction Capacitanc.

LCE13A : .

LCE13A : LCE6.5 THRU LCE28A SERIES LOW CAPACITANCE TRANSZORB™ TRANSIENT VOLTAGE SUPPRESSOR Stand-off Voltage - 6.5 to 28 Volts Schematic Transient Voltage Suppressor Peak Pulse Power - 1500 Watts FEATURES ♦ Plastic package has Underwriters Laboratory Flammability Classification 94V-0 ♦ Glass passivated junction ♦ 1500W peak pulse power capability with a 10/1000µs waveform, repetition rate (duty cycle): 0.05% ♦ Excellent clamping capability ♦ Low incremental surge resistance ♦ Fast response time: typically less than 5.0ns from 0 volts to V(BR) ♦ Ideal for data line applications ♦ High temperature soldering guaranteed: 265°C/10 seconds, 0.375" (9.5mm) lead length, 5lbs. (2.3 kg) tension Case Style 1..

LCE13A : LCE SERIES VBR : 6.5 - 90 Volts PPK : 1500 Watts FEATURES : * 1500W Peak Pulse Surge reverse capability on 10/1000µs waveform * Excellent clamping capability * Low incremental surge resistance * Fast response time : typically less than 5.0 ns from 0 volts to BV LOW CAPACITANCE TRANSIENT VOLTAGE SUPPRESSOR DO-201 0.21 (5.33) 0.19 (4.83) 1.00 (25.4) MIN. 0.375 (9.53) 0.285 (7.24) MECHANICAL DATA * Case : DO-201AD Molded plastic * Epoxy : UL94V-O rate flame retardant * Lead : Axial lead solderable per MIL-STD-202, method 208 guaranteed * Polarity : Color band denotes positive end on the Transorb (cathode) * Mounting position : Any * Weight : 0.93 gram 0.042 (1.07) 0.038 (0.97) 1.00 (25.4).

LCE13A : Transient Voltage Suppressors Chip Integration Technology Corporation LCE Series 1500W Leaded Type Transient Voltage Suppressors VOLTAGE : 6.5 TO 90Volts Features Outline • Axial lead type devices for through hole design. • 1500W peak pulse power capability with a 10/1000uS waveform, repetition rate (duty cycle): 0.05%. • Excellent clamping capability. • Low incremental surge resistance. • Suffix "G" indicates Halogen-free part, ex.LCE6.5AG. • Ultra high-speed switching. • Glass passivated chip junction. • Lead-free parts meet environmental standards of MIL-STD-19500 /228 DO-201AE .210(5.3) .189(4.8) DIA. 1.0(25.4) MIN. .375(9.5) .287(7.3) Mechanical data • Epoxy:UL94-V0 rated flame .




Since 2006. D4U Semicon,
Electronic Components Datasheet Search Site. (Privacy Policy & Contact)