DatasheetsPDF.com

HD2501 Datasheet PDF


Part Number HD2501
Manufacturer WON-TOP
Title 25A GLASS PASSIVATED HITACHI TYPE PRESS-FIT DIODE
Description ® WON-TOP ELECTRONICS HD2500 – HD2506 25A GLASS PASSIVATED HITACHI TYPE PRESS-FIT DIODE Pb Features  Glass Passivated Die Construction  Low Le...
Features
 Glass Passivated Die Construction
 Low Leakage
 Low Cost
 High Surge Current Capability
 Typical IR less than 5.0µA
 C-Band Terminal Construction Mechanical Data
 Case: 12mm Hitachi Type Press-Fit
 Terminals: Contact Areas Readily Solderable
 Polarity: Cathode to Case (Reverse Units Are A...

File Size 27.71KB
Datasheet HD2501 PDF File








Similar Ai Datasheet

HD2.2M25 : HIGH–FREQ ALUMINUM ELECTROLYTIC HD SERIES SUBMINIATURE (Radial Lead, Horizontal Deflection) The NTE HD series of aluminum electrolytic non–polarized capacitors are designed specifically for horizontal deflection current correction where high frequency and high ripple current occur. MECHANICAL SPECIFICATIONS Lead Solderability: Meets the requirements of MIL–STD 202, Method 208 Marking: Consists of series type, nominal capacitance, rated voltage, temperature range, anode and/or cathode identification, NTE identification. Recommended Cleaning Solvents: Methanol, isopropanol ethanol, isobutanol, petroleum ether, propanol and/or commercial detergents. Halogenated hydrocarbon cleaning agents such.

HD2001 : The HD2001 is an 1:4 power divider.The divider covers the frequency range from 800MHz to 2.5GHz. www.DataSheet4U.com Electrical Performance Typical Data @25 °C Parameter Frequency Insertion Loss Isolation Amplitude Unbalance Phase Unbalance VSWR Input VSWR Output Input Power Max Load VSWR 1.2:1 2.0:1 Operating Temperature Connector Input Connectors Output Size -40 SMA-f Coax Cable (200mm), HIROSE 130 x 65 x 15.5 (mounting included) mm 30 5 +85 °C W 22 0.3 6 1.4:1 1.4:1 Min 0.8 0.8 (1.4) Typ Max 2.5 Units GHz dB (incl. Cable) dB dB deg Data are specified with all ports terminated 50 Ohms. Rev. 1.0 HBH Microwave GmbH, Helmholtzstr 9, 76297 Stutensee, Germany Phone +49-7244-6098490 Internet.

HD20CFW : HD00CFW HD00CFY 88062-008 Solid State Relay (SSR) HD02CFW HD02CFY 88062-006 SSR with Switch Status HD20CFW HD20CFY 88062-004 SSR with Short Circuit Protection HD22CFW HD22CFY 88062-002 SSR with Short Circuit Protection and Switch Status HD24CFW HD24CFY SSR with Short Circuit Protection and Trip Status * The Y suffix denotes parameters tested to MIL-PRF-28750 specifications. The W suffix denotes parameters tested to Teledyne Specifications. ELECTRICAL SPECIFICATIONS (–55°C to +105°C UNLESS OTHERWISE NOTED) INPUT (CONTROL) SPECIFICATIONS When used in 2 terminal configuration (TTL or direct control) Min Typ Max Units Input Current 14 15 mA @ VIN = 5 Vdc (See Fig 2) Turn-Off.

HD20CFY : HD00CFW HD00CFY 88062-008 Solid State Relay (SSR) HD02CFW HD02CFY 88062-006 SSR with Switch Status HD20CFW HD20CFY 88062-004 SSR with Short Circuit Protection HD22CFW HD22CFY 88062-002 SSR with Short Circuit Protection and Switch Status HD24CFW HD24CFY SSR with Short Circuit Protection and Trip Status * The Y suffix denotes parameters tested to MIL-PRF-28750 specifications. The W suffix denotes parameters tested to Teledyne Specifications. ELECTRICAL SPECIFICATIONS (–55°C to +105°C UNLESS OTHERWISE NOTED) INPUT (CONTROL) SPECIFICATIONS When used in 2 terminal configuration (TTL or direct control) Min Typ Max Units Input Current 14 15 mA @ VIN = 5 Vdc (See Fig 2) Turn-Off.

HD22CFW : HD00CFW HD00CFY 88062-008 Solid State Relay (SSR) HD02CFW HD02CFY 88062-006 SSR with Switch Status HD20CFW HD20CFY 88062-004 SSR with Short Circuit Protection HD22CFW HD22CFY 88062-002 SSR with Short Circuit Protection and Switch Status HD24CFW HD24CFY SSR with Short Circuit Protection and Trip Status * The Y suffix denotes parameters tested to MIL-PRF-28750 specifications. The W suffix denotes parameters tested to Teledyne Specifications. ELECTRICAL SPECIFICATIONS (–55°C to +105°C UNLESS OTHERWISE NOTED) INPUT (CONTROL) SPECIFICATIONS When used in 2 terminal configuration (TTL or direct control) Min Typ Max Units Input Current 14 15 mA @ VIN = 5 Vdc (See Fig 2) Turn-Off.

HD22CFY : HD00CFW HD00CFY 88062-008 Solid State Relay (SSR) HD02CFW HD02CFY 88062-006 SSR with Switch Status HD20CFW HD20CFY 88062-004 SSR with Short Circuit Protection HD22CFW HD22CFY 88062-002 SSR with Short Circuit Protection and Switch Status HD24CFW HD24CFY SSR with Short Circuit Protection and Trip Status * The Y suffix denotes parameters tested to MIL-PRF-28750 specifications. The W suffix denotes parameters tested to Teledyne Specifications. ELECTRICAL SPECIFICATIONS (–55°C to +105°C UNLESS OTHERWISE NOTED) INPUT (CONTROL) SPECIFICATIONS When used in 2 terminal configuration (TTL or direct control) Min Typ Max Units Input Current 14 15 mA @ VIN = 5 Vdc (See Fig 2) Turn-Off.

HD24CFW : HD00CFW HD00CFY 88062-008 Solid State Relay (SSR) HD02CFW HD02CFY 88062-006 SSR with Switch Status HD20CFW HD20CFY 88062-004 SSR with Short Circuit Protection HD22CFW HD22CFY 88062-002 SSR with Short Circuit Protection and Switch Status HD24CFW HD24CFY SSR with Short Circuit Protection and Trip Status * The Y suffix denotes parameters tested to MIL-PRF-28750 specifications. The W suffix denotes parameters tested to Teledyne Specifications. ELECTRICAL SPECIFICATIONS (–55°C to +105°C UNLESS OTHERWISE NOTED) INPUT (CONTROL) SPECIFICATIONS When used in 2 terminal configuration (TTL or direct control) Min Typ Max Units Input Current 14 15 mA @ VIN = 5 Vdc (See Fig 2) Turn-Off.

HD24CFY : HD00CFW HD00CFY 88062-008 Solid State Relay (SSR) HD02CFW HD02CFY 88062-006 SSR with Switch Status HD20CFW HD20CFY 88062-004 SSR with Short Circuit Protection HD22CFW HD22CFY 88062-002 SSR with Short Circuit Protection and Switch Status HD24CFW HD24CFY SSR with Short Circuit Protection and Trip Status * The Y suffix denotes parameters tested to MIL-PRF-28750 specifications. The W suffix denotes parameters tested to Teledyne Specifications. ELECTRICAL SPECIFICATIONS (–55°C to +105°C UNLESS OTHERWISE NOTED) INPUT (CONTROL) SPECIFICATIONS When used in 2 terminal configuration (TTL or direct control) Min Typ Max Units Input Current 14 15 mA @ VIN = 5 Vdc (See Fig 2) Turn-Off.

HD2500 : ® WON-TOP ELECTRONICS HD2500 – HD2506 25A GLASS PASSIVATED HITACHI TYPE PRESS-FIT DIODE Pb Features  Glass Passivated Die Construction  Low Leakage  Low Cost  High Surge Current Capability  Typical IR less than 5.0µA  C-Band Terminal Construction Mechanical Data  Case: 12mm Hitachi Type Press-Fit  Terminals: Contact Areas Readily Solderable  Polarity: Cathode to Case (Reverse Units Are Available Upon Request and Are Designated By A “R” Suffix, i.e. HD2502R or HD2504R)  Polarity: White Color Equals Standard, Black Color Equals Reverse Polarity  Mounting Position: Any  Lead Free: For RoHS / Lead Free Version, Add “-LF” Suffix to Part Number, See Page 2 D Anode + C B A 12mm H.

HD2502 : ® WON-TOP ELECTRONICS HD2500 – HD2506 25A GLASS PASSIVATED HITACHI TYPE PRESS-FIT DIODE Pb Features  Glass Passivated Die Construction  Low Leakage  Low Cost  High Surge Current Capability  Typical IR less than 5.0µA  C-Band Terminal Construction Mechanical Data  Case: 12mm Hitachi Type Press-Fit  Terminals: Contact Areas Readily Solderable  Polarity: Cathode to Case (Reverse Units Are Available Upon Request and Are Designated By A “R” Suffix, i.e. HD2502R or HD2504R)  Polarity: White Color Equals Standard, Black Color Equals Reverse Polarity  Mounting Position: Any  Lead Free: For RoHS / Lead Free Version, Add “-LF” Suffix to Part Number, See Page 2 D Anode + C B A 12mm H.

HD2503 : ® WON-TOP ELECTRONICS HD2500 – HD2506 25A GLASS PASSIVATED HITACHI TYPE PRESS-FIT DIODE Pb Features  Glass Passivated Die Construction  Low Leakage  Low Cost  High Surge Current Capability  Typical IR less than 5.0µA  C-Band Terminal Construction Mechanical Data  Case: 12mm Hitachi Type Press-Fit  Terminals: Contact Areas Readily Solderable  Polarity: Cathode to Case (Reverse Units Are Available Upon Request and Are Designated By A “R” Suffix, i.e. HD2502R or HD2504R)  Polarity: White Color Equals Standard, Black Color Equals Reverse Polarity  Mounting Position: Any  Lead Free: For RoHS / Lead Free Version, Add “-LF” Suffix to Part Number, See Page 2 D Anode + C B A 12mm H.

HD2504 : ® WON-TOP ELECTRONICS HD2500 – HD2506 25A GLASS PASSIVATED HITACHI TYPE PRESS-FIT DIODE Pb Features  Glass Passivated Die Construction  Low Leakage  Low Cost  High Surge Current Capability  Typical IR less than 5.0µA  C-Band Terminal Construction Mechanical Data  Case: 12mm Hitachi Type Press-Fit  Terminals: Contact Areas Readily Solderable  Polarity: Cathode to Case (Reverse Units Are Available Upon Request and Are Designated By A “R” Suffix, i.e. HD2502R or HD2504R)  Polarity: White Color Equals Standard, Black Color Equals Reverse Polarity  Mounting Position: Any  Lead Free: For RoHS / Lead Free Version, Add “-LF” Suffix to Part Number, See Page 2 D Anode + C B A 12mm H.

HD2505 : ® WON-TOP ELECTRONICS HD2500 – HD2506 25A GLASS PASSIVATED HITACHI TYPE PRESS-FIT DIODE Pb Features  Glass Passivated Die Construction  Low Leakage  Low Cost  High Surge Current Capability  Typical IR less than 5.0µA  C-Band Terminal Construction Mechanical Data  Case: 12mm Hitachi Type Press-Fit  Terminals: Contact Areas Readily Solderable  Polarity: Cathode to Case (Reverse Units Are Available Upon Request and Are Designated By A “R” Suffix, i.e. HD2502R or HD2504R)  Polarity: White Color Equals Standard, Black Color Equals Reverse Polarity  Mounting Position: Any  Lead Free: For RoHS / Lead Free Version, Add “-LF” Suffix to Part Number, See Page 2 D Anode + C B A 12mm H.

HD2506 : ® WON-TOP ELECTRONICS HD2500 – HD2506 25A GLASS PASSIVATED HITACHI TYPE PRESS-FIT DIODE Pb Features  Glass Passivated Die Construction  Low Leakage  Low Cost  High Surge Current Capability  Typical IR less than 5.0µA  C-Band Terminal Construction Mechanical Data  Case: 12mm Hitachi Type Press-Fit  Terminals: Contact Areas Readily Solderable  Polarity: Cathode to Case (Reverse Units Are Available Upon Request and Are Designated By A “R” Suffix, i.e. HD2502R or HD2504R)  Polarity: White Color Equals Standard, Black Color Equals Reverse Polarity  Mounting Position: Any  Lead Free: For RoHS / Lead Free Version, Add “-LF” Suffix to Part Number, See Page 2 D Anode + C B A 12mm H.

HD26C31 : The HD26C31 features quadruple differential line drivers which satisfy the requirements of EIA standard RS-422A. This device is designed to provide differential signals with high current capability on bus lines. The circuit provides enable input to control all four drivers. The output circuit has active pull up and pull down and is capable of sinking or sourcing 20 mA. Features • • • • • • • • • • TTL input compatibility Propagation delay time: 6 ns typ Output to output skew: 0.5 ns typ High output impedance in power off conditions Meets EIA standard RS-422A Operates from a single 5 V supply Three state outputs Low power dissipation with CMOS process Power up and power down protection Pin t.

HD26C32A : The HD26C32A provides differential line receivers which realize low power dissipation by CMOS process. The device has four receivers which meet the requirements of EIA standard RS-422A and RS-423A in a 16 pin package. The enable function is common to all four receivers and offers a choise of active high or active low inputs. Fail safe design ensures that if the inputs are open the outputs will always be high. Features • • • • • • • • • Low power dissipation with CMOS process Meets EIA standard RS-422A/423A Input sensitivity: ±0.2V (In the range of ±7 V of common mode input voltage) Propagation delay time: 19 ns typ Input hysteresis width: 60 mV typ Three state outputs Differential Inputs ar.




Since 2006. D4U Semicon,
Electronic Components Datasheet Search Site. (Privacy Policy & Contact)