DatasheetsPDF.com

SMAJ6.5CAe3 Datasheet PDF


Part Number SMAJ6.5CAe3
Manufacturer Microsemi
Title 400W Transient Voltage Suppressor protection device
Description and applications This device has the ability to clamp dangerous high voltage, short term transients such as produced by directed or radiated elect...
Features ...

File Size 480.83KB
Datasheet SMAJ6.5CAe3 PDF File








Similar Ai Datasheet

SMAJ6.5C : SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSORS SMAJ5.0 - SMAJ440CA FEATURES ▪ Working peak reverse voltage range – 5.0V to 440V. ▪ Peak power dissipation 400W @10 x 1000 us Pulse ▪ Low profile package. ▪ Excellent clamping capability. ▪ Glass passivated junction. ▪ Fast response time: typically less than 1 ns for Uni-direction. Less than 5 ns for Bi-direction, from 0 Volts to BV min ▪ Typical IR less than 1uA above 10V. ▪ Plastic material has UL flammability classification 94V-O ▪ RoHS compliant in lead-free versions MECHANICAL CHARACTERISTICS ▪ CASE: Void-free, JEDEC DO-214AC Molded Plastic over glass passivated junction. ▪ Mounting Position: Any ▪ Polarity: by cathode band denotes uni-direct.

SMAJ6.5C : LITE-ON SEMICONDUCTOR SMAJ SERIES SURFACE MOUNT UNIDIRECTIONAL AND BIDIRECTIONAL TRANSIENT VOLTAGE SUPPRESSORS STAND-OFF VOLTAGE - 5.0 to 170 Volts POWER DISSIPATION - 400 WATTS FEATURES Rating to 200V VBR For surface mounted applications Reliable low cost construction utilizing molded plastic technique Plastic material has UL flammability classification 94V-O Typical IR less than 1uA above 10V Fast response time: typically less than 1.0ns for Uni-direction,less than 5.0ns for Bi-direction,form 0 Volts to BV min MECHANICAL DATA Case : Molded plastic Polarity : by cathode band denotes uni-directional device none cathode band denotes bi-directional device Weight : 0.002 ounces, 0.064 gram .

SMAJ6.5C : CYStech Electronics Corp. Spec. No. : C290SA Issued Date : 2010.01.19 Revised Date : 2016.01.11 Page No. : 1/9 Surface Mount Transient Voltage Suppressors Peak Pulse Power 400W Stand Off Voltage 5.0 to 440V SMAJ5.0 thru SMAJ440CA Features  Low profile package with built-in strain relief for surface mounted applications  Plastic package has UL flammability classification 94V-0  Ideal for ESD protection of data line in accordance with IEC1000-4-2 (IEC801-2)  Ideal for EFT protection of data line in accordance with IEC1000-4-4 (IEC801-4)  Very-fast response time  Optimized for LAN protection applications  Low incremental surge resistance, excellent clamping capability  Glass passivat.

SMAJ6.5C : SMAJ SERIES 400Watts Surface Mount Transient Voltage Suppressor Features SMA/DO-214AC For surface mounted application Low profile package Built-in strain relief Glass passivated junction Excellent clamping capability Fast response time: Typically less than 1.0ps from 0 volt to BV min. Typical IR less than 1µA above 10V High temperature soldering guaranteed: 260oC / 10 seconds at terminals Plastic material used carries Underwriters Laboratory Flammability Classification 94V-0 400 watts peak pulse power capability with a 10 x 1000 us waveform by 0.01% duty cycle (300W above 78V). 0.063(1.60) 0.051(1.30) 0.096(2.45) 0.078(2.00) 0.059(1.50) 0.035(0.90) 0.181(4.60) 0.161(4.10) 0.108(2.75) 0.

SMAJ6.5CA : SMAJ Series Transient Voltage Suppression Diodes Surface Mount – 400W SMAJ series RoHS Pb e3 Uni-directional Bi-directional Agency Approvals AGENCY AGENCY FILE NUMBER E230531 Maximum Ratings and Thermal Characteristics (TA=25OC unless otherwise noted) Parameter Peak Pulse Power Dissipation at (TFAi=g2.25)º(NCobtye 10/1000µs Waveform 1), (Note 2), (Note 5) Symbol PPPM Value 400 Power Dissipation on Infinite Heat Sink at TL=50OC PD 3.3 Peak Forward Surge Current, 8.3ms Single Half Sine Wave (Note 3) IFSM 60 Maximum Instantaneous Forward Voltage at 25A for Unidirectional Only (Note 4) VF 3.5/5.0 Operating Temperature Range Storage Temperature Range TJ -65 to 150 TSTG .

SMAJ6.5CA : SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSORS SMAJ5.0 - SMAJ440CA FEATURES ▪ Working peak reverse voltage range – 5.0V to 440V. ▪ Peak power dissipation 400W @10 x 1000 us Pulse ▪ Low profile package. ▪ Excellent clamping capability. ▪ Glass passivated junction. ▪ Fast response time: typically less than 1 ns for Uni-direction. Less than 5 ns for Bi-direction, from 0 Volts to BV min ▪ Typical IR less than 1uA above 10V. ▪ Plastic material has UL flammability classification 94V-O ▪ RoHS compliant in lead-free versions MECHANICAL CHARACTERISTICS ▪ CASE: Void-free, JEDEC DO-214AC Molded Plastic over glass passivated junction. ▪ Mounting Position: Any ▪ Polarity: by cathode band denotes uni-direct.

SMAJ6.5CA : LITE-ON SEMICONDUCTOR SMAJ SERIES SURFACE MOUNT UNIDIRECTIONAL AND BIDIRECTIONAL TRANSIENT VOLTAGE SUPPRESSORS STAND-OFF VOLTAGE - 5.0 to 170 Volts POWER DISSIPATION - 400 WATTS FEATURES Rating to 200V VBR For surface mounted applications Reliable low cost construction utilizing molded plastic technique Plastic material has UL flammability classification 94V-O Typical IR less than 1uA above 10V Fast response time: typically less than 1.0ns for Uni-direction,less than 5.0ns for Bi-direction,form 0 Volts to BV min MECHANICAL DATA Case : Molded plastic Polarity : by cathode band denotes uni-directional device none cathode band denotes bi-directional device Weight : 0.002 ounces, 0.064 gram .

SMAJ6.5CA : CYStech Electronics Corp. Spec. No. : C290SA Issued Date : 2010.01.19 Revised Date : 2016.01.11 Page No. : 1/9 Surface Mount Transient Voltage Suppressors Peak Pulse Power 400W Stand Off Voltage 5.0 to 440V SMAJ5.0 thru SMAJ440CA Features  Low profile package with built-in strain relief for surface mounted applications  Plastic package has UL flammability classification 94V-0  Ideal for ESD protection of data line in accordance with IEC1000-4-2 (IEC801-2)  Ideal for EFT protection of data line in accordance with IEC1000-4-4 (IEC801-4)  Very-fast response time  Optimized for LAN protection applications  Low incremental surge resistance, excellent clamping capability  Glass passivat.

SMAJ6.5CA : www.DataSheet.co.kr SMAJ5.0A/CA thru SMAJ170A/CA 400W Surface Mount Transient Voltage Suppressors Peak Pulse Power 400 Watt Stand-off Voltage 5.0 To 170 VOLTS Feature: * 400 Watt Peak Power Dissipation * Glass Passivated Die Construction * Excellent Clamping Capability Fast Response Time * Plastic Material Has UL Flammability Classification Rating 94V-O Mechanical Data * Case: Transfer Molded Epoxy * Polarity: Indicator by Cathode Band (Bi-directional Devices Has no Polarity Indicator) * Terminals: Solderable per MIL-STD-202 Method 208 * Weight: 0.064grams(approx) SMA(DO-214AC) Maximum Ratings Characteristics Peak Pulse Power Dissipation on 10/1000us Waveform(1)(2)(FIG1) Peak Pulse Cur.

SMAJ6.5CA : Stand-Off Voltage Peak Pulse Power Dissipation on 10/1000 us waveform Peak Pulse current on 10/1000 us waveform Steady State Power Dissipation Peak Forward Surge Current Maximum Instantaneous Forward Voltage Operating Junction and Storage Value 5.0 to 170 Minimum 400 See Table 1.0 40.0 3.5 -55 to 150 Unit V W A W A V °C Conditions Non-repetitive current pulse Non-repetitive current pulse At TL(Lead Temperature)=75°C (Note 1) 8.3ms single half sine-wave superimposed on rated load (uni-direction only), TL=75°C 8.3ms single half sine-wave (uni-direction only), TL=75°C TJ,TSTG Temperature Range Note: (1) Mounted on copper pad area of 0.2" x 0.2" (5.0mmx5.0mm). TAITRON COMPONENTS INCORPORA.

SMAJ6.5CA : MCC TM Micro Commercial Components   omponents 20736 Marilla Street Chatsworth    !"# $ %    !"# Features • Halogen free available upon request by adding suffix "-HF" • For Surface Mount Applications • Unidirectional And Bidirectional • Low Inductance • High Temp Soldering: 260°C for 10 Seconds At Terminals • For Bidirectional Devices Add “C” To The Suffix of The Part Number: i.e.SMAJ5.0CA for 5% Tolerance • Lead Free Finish/Rohs Compliant (Note1) ("P"Suffix designates Compliant. See ordering information) • UL Recognized File # E331408 0HFKDQLFDO'DWD • Epoxy meets UL 94 V-0 flammability rating • Moisture Sensitivity Level 1 • Polarity.

SMAJ6.5CA : UL File Number: E153537 Electrical Characteristics (@ TA = 25 °C Unless Otherwise Noted) Parameter Symbol Value Minimum Peak Pulse Power Dissipation (TP = 1 ms) (Note 1,2) Peak Forward Surge Current 8.3 ms Single Half Sine Wave Superimposed on Rated Load (JEDEC Method) (Note 3) PPK 400 IFSM 40 Steady State Power Dissipation @ TL = 75 °C PM(AV) 1.0 Maximum Instantaneous Forward Voltage @ IPP = 35 A (For Unidirectional Units Only) SMAJ5.0A ~ SMAJ90A SMAJ100A ~ SMAJ495A VF 3.5 5.0 Operating Temperature Range TJ -55 to +150 Storage Temperature Range TSTG -55 to +150 1. Non-repetitive current pulse, per Pulse Waveform graph and derated above TA = 25 °C per Pulse Derating .

SMAJ6.5CA : The SMAJ series is designed to protect sensitive equipment against electrostatic discharges according to IEC 61000-4-2 and MIL STD 883, method 3015, and electrical overstress according to IEC 61000-4-4 and 5. This device is more generally used against surges below 600 W (10/1000 μs). The Planar technology makes it compatible with high-end circuits where low leakage current and high junction temperature are required to provide long term reliability and stability. SMAJ devices are packaged in SMA (SMA footprint in accordance with IPC 7531 standard). DS1251 - Rev 14 - May 2022 For further information contact your local STMicroelectronics sales office. www.st.com SMAJxxA, SMAJxxCA Characteris.

SMAJ6.5CA : SMAJ series, 400W transient voltage suppressor (TVS) in SMA package, designed to protect electronic circuits against damage induced by lightning surges or other transient voltage events. 2. Features and benefits • Peak pulse power 400W @ 10/1000μs waveform • Excellent clamping capability • Low incremental surge resistance • Surface mount package for easy assembly and PCB space-saving • Typical IR 1μA when VBR min 12V • Fast response time: typically 1.0ps from 0V to VBR minimum • IEC 61000-4-2 ESD 30kV (Air), 30kV (Contact) • EFT protection of data lines in accordance with IEC 61000-4-4 • Guaranteed high temperature for reflow soldering: 260°C/10sec • Mold compound complies to UL94V-0 .

SMAJ6.5CA : Green SMAJ5.0(C)A - SMAJ200(C)A 400W SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR Features  400W Peak Pulse Power Dissipation  Glass Passivated Die Construction  Unidirectional and Bidirectional Versions Available  Excellent Clamping Capability  Fast Response Time  Lead-Free Finish; RoHS Compliant (Notes 1 & 2)  Halogen and Antimony Free. “Green” Device (Note 3)  For automotive applications requiring specific change control (i.e. parts qualified to AEC-Q100/101/200, PPAP capable, and manufactured in IATF 16949 certified facilities), please contact us or your local Diodes representative. https://www.diodes.com/quality/product-definitions/  An Automotive-Complaint Part is Available U.

SMAJ6.5CA : Elektronische Bauelemente SMAJ SERIES 5V ~ 440V 400W Peak Power Surface Mount TVS RoHS Compliant Product A suffix of “-C” specifies halogen-free and lead-free FEATURES For surface mount application Build-in strain relief Excellent clamping capability Low profile package Fast response time: Typically less than 1.0ps from 0 volt to BV min. Typical IR less than 1mA above 10V High temperature soldering guaranteed: 260°C / 10 seconds at terminals MECHANICAL DATA Case: Molded Plastic Epoxy: UL 94V-0 rate flame retardant Lead: Solderable per MIL-STD-202, Method 208 Guaranteed Polarity: Color band denotes cathode end except bidirectional Mounting position: Any Weight: 0.063 grams SMA B AC D GE .

SMAJ6.5CA : SMAJ SERIES GLASS PASSIVATED SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR Breakdown Voltage - 5.0 to 440 Volts Peak Pulse Power-400 Watts SMA/DO-214AC 0.115(2.92) 0.090(2.28) 0.096(2.43) 0.078(1.99) 0.050(1.27) 0.030(0.77) 0.181(4.60) 0.157(4.00) Max. 0.203 0.220(5.60) 0.191(4.84) 0.064(1.63) 0.050(1.27) 0.016(0.41) 0.006(0.15) *Dimensions in inches and (millimeters) FEATURES * Glass passivated chip * 400 W peak pulse power capability with a 10/1000 µs wavefrom, repetitive rate (duty cycle) : 0.01% * Low leakage * Excellent clamping capability * Very fast response time MECHANICAL DATA Case : JEDEC DO-214AC molded plastic Terminals : Plated axial leads , solderable per MIL-STD-750, Met.




Since 2006. D4U Semicon,
Electronic Components Datasheet Search Site. (Privacy Policy & Contact)