DatasheetsPDF.com

NCV361

Part Number NCV361
Manufacturer ON Semiconductor
Title USB Positive Overvoltage Protection Controller
Description (UDFN Package) Pin No. Name Type Description 1 EN INPUT Enable Pin. The device enters in shutdown mode when this pin is tied to a high level. ...
Features
• Overvoltage Protection up to 20 V
• On−chip PMOS Transistor
• Overvoltage Lockout (OVLO)
• Undervoltage Lockout (UVLO)
• Overcurrent Protection
• Alert FLAG Output
• EN Enable Pin
• Thermal Shutdown
• Compliance to IEC61000−4−2 (Level 4) 8 kV (Contact) 15 kV (Air)
• ESD Ratings: Machine Model = B ...

File Size 342.11KB
Datasheet NCV361 PDF File







Similar Datasheet

NCV360 : (UDFN6 Package) Pin No. Name Type Description 1 EN INPUT Enable Pin. The device enters in shutdown mode when this pin is tied to a high level. In this case the output is disconnected from the input. To allow normal functionality, the EN pin shall be connected to GND or to a I/O pin. This pin does not have an impact on the fault detection. 2 GND POWER Ground 3 IN POWER Input Voltage Pin. This pin is connected to the VBUS. A 1 mF low ESR ceramic capacitor, or larger, must be connected between this pin and GND. 4, 5 OUT OUTPUT Output Voltage Pin. The output is disconnected from the VBUS power supply when the input voltage is above OVLO threshold or below UVLO threshold. A 1 mF capacitor .




Since 2006. D4U Semicon,
Electronic Components Datasheet Search Site. (Privacy Policy & Contact)