DatasheetsPDF.com

PCM1753


Part Number PCM1753
Manufacturer Texas Instruments
Title Digital-to-Analog Converter
Description The PCM1753, PCM1754, and PCM1755 (PCM175x) devices are stereo digital-to-analog converters (DACs) based on TI's enhanced delta-sigma architecture...
Features
•1 24-bit resolution
• Analog performance (VCC = 5 V)
  – Dynamic range: 106 dB
  – SNR: 106 dB, typical
  – THD+N: 0.002%, typical
  – Full-scale output: 4 VPP, typical
• 4× or 8× oversampling digital filter
  – Stop-band attenuation:
  –50 dB
  – Pass-band ripple: ±0.04 dB
• Sampling frequency: 5 kHz to 200 kHz...

File Size 2.31MB
Datasheet PCM1753 PDF File








Similar Ai Datasheet

PCM1750P : The PCM1750 is a low cost, dual 18-bit CMOS analog-to-digital converter optimized for dynamic signal applications. The PCM1750 features true co-phased inputs with an internal sample/hold function for each channel. The PCM1750 also comes complete with an internal reference. Total power dissipation is less than 300mW max using ±5V voltage supplies. Low maximum Total Harmonic Distortion + Noise (–88dB max) is 100% tested. The very fast PCM1750 is capable of 4X x audio bandwidth oversampling rates on both input channels simultaneously, providing greater freedom to designers in selecting input anti-aliasing filters. PCM1750 outputs serial data in a format that is compatible with many digital filt.

PCM1750U : The PCM1750 is a low cost, dual 18-bit CMOS analog-to-digital converter optimized for dynamic signal applications. The PCM1750 features true co-phased inputs with an internal sample/hold function for each channel. The PCM1750 also comes complete with an internal reference. Total power dissipation is less than 300mW max using ±5V voltage supplies. Low maximum Total Harmonic Distortion + Noise (–88dB max) is 100% tested. The very fast PCM1750 is capable of 4X x audio bandwidth oversampling rates on both input channels simultaneously, providing greater freedom to designers in selecting input anti-aliasing filters. PCM1750 outputs serial data in a format that is compatible with many digital filt.

PCM1753 : The PCM1753/54/55 is a CMOS, monolithic, integrated circuit, which includes stereo digital-to-analog converters and support circuitry in a small 16-lead SSOP package. The data converters use TI’s enhanced multilevel delta-sigma architecture, which employs 4th-order noise shaping and 8-level amplitude quantization to achieve excellent dynamic performance and improved tolerance to clock jitter. The PCM1753/54/55 accepts industrystandard audio data formats with 16- to 24-bit data, providing easy interfacing to audio DSP and decoder chips. Sampling rates up to 200 kHz are supported. A full set of user-programmable functions is accessible through a three-wire serial control port, which supports r.

PCM1753-Q1 : The PCM175x-Q1 family of devices is a CMOS, monolithic, integrated circuit, which includes stereo digital-to-analog converters and support circuitry in a small 16-lead SSOP package. The data converters use TI's enhanced multilevel delta-sigma architecture, which employs 4th-order noise shaping and 8-level amplitude quantization to achieve excellent dynamic performance and improved tolerance to clock jitter. The PCM175x-Q1 family of devices accepts industrystandard audio data formats with 16- to 24-bit data, providing easy interfacing to audio DSP and decoder chips. Sampling rates up to 200 kHz are supported. A full set of user-programmable functions is accessible through a three-wire serial .

PCM1754 : The PCM1753/54/55 is a CMOS, monolithic, integrated circuit, which includes stereo digital-to-analog converters and support circuitry in a small 16-lead SSOP package. The data converters use TI’s enhanced multilevel delta-sigma architecture, which employs 4th-order noise shaping and 8-level amplitude quantization to achieve excellent dynamic performance and improved tolerance to clock jitter. The PCM1753/54/55 accepts industrystandard audio data formats with 16- to 24-bit data, providing easy interfacing to audio DSP and decoder chips. Sampling rates up to 200 kHz are supported. A full set of user-programmable functions is accessible through a three-wire serial control port, which supports r.

PCM1754 : The PCM1753, PCM1754, and PCM1755 (PCM175x) devices are stereo digital-to-analog converters (DACs) based on TI's enhanced delta-sigma architecture. This enhanced architecture employs 4thorder noise shaping and 8-level amplitude quantization to achieve excellent dynamic performance and improved clock jitter tolerance. The PCM175x devices easily interface with audio DSP and decoder chips because of the devices support of industry-standard audio data formats with 16-bit and 24-bit data. The PCM175x devices can be controlled in a hardware mode, or through a full set of userprogrammable functions that are accessible through a three-wire serial control port that supports registerwrite functions. T.

PCM1754-Q1 : The PCM175x-Q1 family of devices is a CMOS, monolithic, integrated circuit, which includes stereo digital-to-analog converters and support circuitry in a small 16-lead SSOP package. The data converters use TI's enhanced multilevel delta-sigma architecture, which employs 4th-order noise shaping and 8-level amplitude quantization to achieve excellent dynamic performance and improved tolerance to clock jitter. The PCM175x-Q1 family of devices accepts industrystandard audio data formats with 16- to 24-bit data, providing easy interfacing to audio DSP and decoder chips. Sampling rates up to 200 kHz are supported. A full set of user-programmable functions is accessible through a three-wire serial .

PCM1755 : The PCM1753/54/55 is a CMOS, monolithic, integrated circuit, which includes stereo digital-to-analog converters and support circuitry in a small 16-lead SSOP package. The data converters use TI’s enhanced multilevel delta-sigma architecture, which employs 4th-order noise shaping and 8-level amplitude quantization to achieve excellent dynamic performance and improved tolerance to clock jitter. The PCM1753/54/55 accepts industrystandard audio data formats with 16- to 24-bit data, providing easy interfacing to audio DSP and decoder chips. Sampling rates up to 200 kHz are supported. A full set of user-programmable functions is accessible through a three-wire serial control port, which supports r.

PCM1755 : The PCM1753, PCM1754, and PCM1755 (PCM175x) devices are stereo digital-to-analog converters (DACs) based on TI's enhanced delta-sigma architecture. This enhanced architecture employs 4thorder noise shaping and 8-level amplitude quantization to achieve excellent dynamic performance and improved clock jitter tolerance. The PCM175x devices easily interface with audio DSP and decoder chips because of the devices support of industry-standard audio data formats with 16-bit and 24-bit data. The PCM175x devices can be controlled in a hardware mode, or through a full set of userprogrammable functions that are accessible through a three-wire serial control port that supports registerwrite functions. T.

PC-10-1000 : Printed Circuit Mount Power Transformers Miniature Low Power Transformers Signal’s PC low power transformers are designed to operate between 50 Hz and 500 Hz without any degradation in output voltage.   General Specifications • Power - 1.0 VA to 24 VA • Dielectric Strength - 1500 Vrms Hipot • Primaries - Single or dual primaries, 115 V or 115/230 V, 50-500 Hz • Dual Secondaries - Series or parallel • Insulation System - Class B, 130º C, UL 1446 E66312 • Mounting Brackets - see chart Agency Certifications • UL recognized to UL 506 / UL 5085-2, File # E63829 • CSA certified to C22.2 #66.1, File # 221070 Primary 50/500 Hz Single 115V 6 Pin PC-10-90 PC-10-120 PC-10-440 PC-10-1000 PC-10-2.

PC-10-120 : Printed Circuit Mount Power Transformers Miniature Low Power Transformers Signal’s PC low power transformers are designed to operate between 50 Hz and 500 Hz without any degradation in output voltage.   General Specifications • Power - 1.0 VA to 24 VA • Dielectric Strength - 1500 Vrms Hipot • Primaries - Single or dual primaries, 115 V or 115/230 V, 50-500 Hz • Dual Secondaries - Series or parallel • Insulation System - Class B, 130º C, UL 1446 E66312 • Mounting Brackets - see chart Agency Certifications • UL recognized to UL 506 / UL 5085-2, File # E63829 • CSA certified to C22.2 #66.1, File # 221070 Primary 50/500 Hz Single 115V 6 Pin PC-10-90 PC-10-120 PC-10-440 PC-10-1000 PC-10-2.

PC-10-2400 : Printed Circuit Mount Power Transformers Miniature Low Power Transformers Signal’s PC low power transformers are designed to operate between 50 Hz and 500 Hz without any degradation in output voltage.   General Specifications • Power - 1.0 VA to 24 VA • Dielectric Strength - 1500 Vrms Hipot • Primaries - Single or dual primaries, 115 V or 115/230 V, 50-500 Hz • Dual Secondaries - Series or parallel • Insulation System - Class B, 130º C, UL 1446 E66312 • Mounting Brackets - see chart Agency Certifications • UL recognized to UL 506 / UL 5085-2, File # E63829 • CSA certified to C22.2 #66.1, File # 221070 Primary 50/500 Hz Single 115V 6 Pin PC-10-90 PC-10-120 PC-10-440 PC-10-1000 PC-10-2.

PC-10-440 : Printed Circuit Mount Power Transformers Miniature Low Power Transformers Signal’s PC low power transformers are designed to operate between 50 Hz and 500 Hz without any degradation in output voltage.   General Specifications • Power - 1.0 VA to 24 VA • Dielectric Strength - 1500 Vrms Hipot • Primaries - Single or dual primaries, 115 V or 115/230 V, 50-500 Hz • Dual Secondaries - Series or parallel • Insulation System - Class B, 130º C, UL 1446 E66312 • Mounting Brackets - see chart Agency Certifications • UL recognized to UL 506 / UL 5085-2, File # E63829 • CSA certified to C22.2 #66.1, File # 221070 Primary 50/500 Hz Single 115V 6 Pin PC-10-90 PC-10-120 PC-10-440 PC-10-1000 PC-10-2.

PC-10-90 : Printed Circuit Mount Power Transformers Miniature Low Power Transformers Signal’s PC low power transformers are designed to operate between 50 Hz and 500 Hz without any degradation in output voltage.   General Specifications • Power - 1.0 VA to 24 VA • Dielectric Strength - 1500 Vrms Hipot • Primaries - Single or dual primaries, 115 V or 115/230 V, 50-500 Hz • Dual Secondaries - Series or parallel • Insulation System - Class B, 130º C, UL 1446 E66312 • Mounting Brackets - see chart Agency Certifications • UL recognized to UL 506 / UL 5085-2, File # E63829 • CSA certified to C22.2 #66.1, File # 221070 Primary 50/500 Hz Single 115V 6 Pin PC-10-90 PC-10-120 PC-10-440 PC-10-1000 PC-10-2.

PC-12-100 : Printed Circuit Mount Power Transformers Miniature Low Power Transformers Signal’s PC low power transformers are designed to operate between 50 Hz and 500 Hz without any degradation in output voltage.   General Specifications • Power - 1.0 VA to 24 VA • Dielectric Strength - 1500 Vrms Hipot • Primaries - Single or dual primaries, 115 V or 115/230 V, 50-500 Hz • Dual Secondaries - Series or parallel • Insulation System - Class B, 130º C, UL 1446 E66312 • Mounting Brackets - see chart Agency Certifications • UL recognized to UL 506 / UL 5085-2, File # E63829 • CSA certified to C22.2 #66.1, File # 221070 Primary 50/500 Hz Single 115V 6 Pin PC-10-90 PC-10-120 PC-10-440 PC-10-1000 PC-10-2.

PC-12-2000 : Printed Circuit Mount Power Transformers Miniature Low Power Transformers Signal’s PC low power transformers are designed to operate between 50 Hz and 500 Hz without any degradation in output voltage.   General Specifications • Power - 1.0 VA to 24 VA • Dielectric Strength - 1500 Vrms Hipot • Primaries - Single or dual primaries, 115 V or 115/230 V, 50-500 Hz • Dual Secondaries - Series or parallel • Insulation System - Class B, 130º C, UL 1446 E66312 • Mounting Brackets - see chart Agency Certifications • UL recognized to UL 506 / UL 5085-2, File # E63829 • CSA certified to C22.2 #66.1, File # 221070 Primary 50/500 Hz Single 115V 6 Pin PC-10-90 PC-10-120 PC-10-440 PC-10-1000 PC-10-2.




Since 2006. D4U Semicon,
Electronic Components Datasheet Search Site. (Privacy Policy & Contact)