DatasheetsPDF.com

MKS20FN128VLH12

NXP

Microcontroller

NXP Semiconductors Data Sheet: Technical Data KS22P100M120SF0 Rev. 3.1, 06/2022 KS22/KS20 Microcontroller 120 MHz ARM®...


MKS20FN128VLH12

NXP


Octopart Stock #: O-1517837

Findchips Stock #: 1517837-F

Web ViewView MKS20FN128VLH12 Datasheet

File DownloadDownload MKS20FN128VLH12 PDF File




Description
NXP Semiconductors Data Sheet: Technical Data KS22P100M120SF0 Rev. 3.1, 06/2022 KS22/KS20 Microcontroller 120 MHz ARM® Cortex®-M4, with up to 256 KB Flash The KS2x product family is built on the ARM® Cortex®-M4 processor with lower power and higher memory densities in multiple packages. This device offers 120 MHz performance with an integrated si
More View ngle-precision floating point unit (FPU). Embedded flash memory sizes range from 128 KB to 256KB. This device also includes: • USB FS OTG 2.0 with crystal-less functionality • FlexCAN, supporting CAN protocol according to the ISO 11898-1 standard and CAN 2.0 B protocol specifications • FlexIO, a highly configurable module providing a wide range of protocols including, but not limited to UART, LPI2C, SPI, I2S, and PWM/Waveform generation. MKS22FN256Vxx12 MKS22FN128Vxx12 MKS20FN256Vxx12 MKS20FN128Vxx12 100 & 64 LQFP (LL & LH) 48 QFN (FT) 14×14×1.7 mm Pitch 7×7×0.65 mm Pitch 0.5 0.5 mm; 10×10×1.6 mm mm Pitch 0.5 mm Performance Analog modules • 120 MHz ARM Cortex-M4 core with DSP instructions • One 16-bit ADC module with up to 17 single-end delivering 1.25 Dhrystone MIPS per MHz channels and 4 differential channels, and up to 1.2 Memories and memory interfaces Msps at ≤ 13-bit mode • One 12-bit DAC module • Up to 256 KB of embedded flash and 64 KB of SRAM • One analog comparator (CMP) module • Preprogrammed Kinetis Flashloader for one-time, in- system factory programming Communication interfaces System peripherals • Flexible low-power modes, multiple wake up sources • 16-channel asynchronous DMA controller • Independent external and software watchdog monitor • USB FS/LS OTG 2.0 with on-chip transceiver • One FlexIO module • Three UART modules (one supporting ISO7816, and the other two operating up to 1.5 Mbit/s) • One LPUART module supporting asynchronous Clocks • Two crystal oscillators: 32 kHz (RTC), and 32-40 kHz or 3-32 MHz • Three internal oscillators: 32 kHz, 4 MHz, and 48 MHz • Multi-purpose clock generator (MCG) with PLL and FLL operation in low-power modes • Two LPI2C modules supporting up to 5 Mbit/s, asynchronous operation in low-power modes supported • Two 16-bit SPI modules supporting up to 30 Mbit/s • Two FlexCAN modules for KS22, One FlexCAN for Security and integrity modules • Hardware CRC module KS20 • Two I2S modules • 128-bit unique identification (UID) number per chip • Hardware random-number generator • Flash access control (FAC) to protect proprietary software Timers • Three 16-bit low-power timer PWM modules (TPM) • One low-power timer (LPTMR) • Periodic interrupt timer (PIT) Human-machine interfaces • Up to 66 general-purpose input/output pins (GPIO) NXP reserves the right to change the production detail specifications as may be required to permit improvements in the design of its products. Operating char






Similar Datasheet




@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site. (Privacy Policy & Contact)