DatasheetsPDF.com

MIC2870


Part Number MIC2870
Manufacturer Microchip
Title 1.5A Synchronous Boost Flash LED Driver
Description The MIC2870 is a high-current, high-efficiency flash LED driver for one or two high-brightness camera flash LEDs. The LED drive current is generat...
Features
• Up to 1.5A Flash LED Driving Current
• 2.7V to 5.0V Input Voltage Range
• High-Efficiency 2 MHz VF Adaptive Boost Driver
• Configurable 1 or 2 Channel(s) WLED Driver
• LED Driving Current Soft-Start
• Control through I2C Interface or External Pins
• Flash Inhibit Function for GSM Pulse Synchroniza...

File Size 1.62MB
Datasheet MIC2870 PDF File








Similar Ai Datasheet

MIC2870 : The MIC2870 is a high-current, high-efficiency flash LED driver for one or two high-brightness camera flash LEDs. The LED driver current is generated by an integrated inductive boost converter with 2MHz switching frequency which allows the use of a very-small inductor and output capacitor. These features make the MIC2870 an ideal solution for high-resolution camera phone LED flashlight driver applications. MIC2870 supports two 750mA white-LEDs (WLEDs) or a single 1.5A WLED configuration. When two WLEDs are connected, their currents are matched automatically. MIC2870 operates in either flash or torch modes that can be controlled through either an I2C interface or external pins. The brightness.

MIC2871 : The MIC2871 is a high-current, high-efficiency flash LED driver. The LED driver current is generated by an integrated inductive boost converter with a 2MHz switching frequency which allows the use of very small inductor and output capacitor. These features make the MIC2871 an ideal solution for high-resolution camera phone LED flash light driver applications. The MIC2871 operates in either flash or torch modes that can be controlled through the single-wire serial interface and/or external control pins. Default flash and torch brightness can be adjusted via an external resistor. A robust single-wire serial interface allows simple control by the host processor to support typical camera functio.

MIC2873 : The MIC2873 is a high-current, high-efficiency flash LED driver. The LED driver current is generated by an integrated inductive boost converter with a 2MHz switching frequency which allows for the use of very small inductor and output capacitor. These features make the MIC2873 an ideal solution for high-resolution camera phone LED flash light driver applications. MIC2873 operates in either flash or torch modes that can be controlled through the single-wire serial interface and/or external control pin. A robust single-wire serial interface allows the host processor to control the LED current and brightness. The MIC2873 is available in a 9-bump 1.30mm × 1.30mm WLCSP package. Datasheets and sup.

MIC2874 : The MIC2874 is a high-current, high-efficiency flash LED driver. The LED driver current is generated by an integrated inductive boost converter with a 4MHz switching frequency which allows for the use of very small inductor and output capacitor. These features make the MIC2874 an ideal solution for high-resolution camera phone LED flash light driver applications. MIC2874 operates in either flash or torch modes that can be controlled through the single-wire serial interface and/or external control pin. A robust single-wire serial interface allows the host processor to control the LED current and brightness. The MIC2874 is available in a 9-bump 1.30mm x 1.30mm WLCSP package. Datasheets and sup.

MIC2875 : The MIC2875 is a compact and highly-efficient 2 MHz synchronous boost regulator with a 4.8A switch. It features a bi-directional load disconnect function which prevents any leakage current between the input and output wh.

MIC2876 : The MIC2876 is a compact and highly efficient 2 MHz synchronous boost regulator with a 4.8A switch. It features a bi-directional load disconnect function that prevents any leakage current between the input and output when the device is disabled. The MIC2876 operates in bypass mode automatically when the in.

MIC2876 : The MIC2876 is a compact and highly-efficient 2MHz synchronous boost regulator with a 4.8A switch. It features a bi-directional load disconnect function which prevents any leakage current between the input and output when the device is disabled. The MIC2876 operates in bypass mode automatically when the input voltage is greater than the target output voltage. At light loads, the boost converter goes to the PFM mode to improve the efficiency. The MIC2876 also features an integrated anti-ringing switch to minimize EMI. The MIC2876 is available in a 8-pin 2mm × 2mm Thin DFN (TDFN) package, with a junction temperature range of −40°C to +125°C. Datasheets and support documentation are available o.

MIC2877 : MIC2877 2 MHz Synchronous Low Voltage Step-Up Regulator with 6.5A Switch and Bidirectional Load Disconnect Features • Typical 6.5A Input Peak Current Limit • Up to 95% Efficiency • Fully Integrated, High-Efficiency, 2 MHz Switching Frequency • Bidirectional True Load Disconnect, Overvoltage Protection (OVP) and Undervoltage Lockout (UVLO) • Controlled Pre-Charge Current Limit at Start-Up • Ultra-Fast Transient Response • Input Voltage Range from 2.5V to 5.5V • Maximum Output Current: - 1.5A, VIN = 2.5V and VOUT = 5V - 2A,VIN = 3V and VOUT = 5V • Output Voltage Range: - Adjustable - Fixed Versions: 4.75V, 5V, 5.25V, 5.5V • Integrated Anti-Ringing Switch for Electromagnetic Interference (EMI).




Since 2006. D4U Semicon,
Electronic Components Datasheet Search Site. (Privacy Policy & Contact)