DatasheetsPDF.com

AN8014 Datasheet PDF


Part Number AN8014
Manufacturer Panasonic Semiconductor
Title Step-down/ step-up/ or inverting DC-DC converter controller
Description Pin No. 1 2 3 4 5 Description Internal reference output Oscillator timing resistor connection Oscillator timing capacitor connection Dead-time co...
Features
• Wide operating supply voltage range (3.6 V to 34 V) (The voltage is limited within a range between 3.6 V and 17 V if it is connected to a step-down volt1.27 (0.605) 0.40±0.25 age circuit.) Seating plane
• Totem pole output circuit: output peak current (±1 A) SOP016-P-0225A
• On-chip pulse-by-puls...

File Size 151.96KB
Datasheet AN8014 PDF File








Similar Ai Datasheet

AN8010 : Voltage Regulators AN80xx/AN80xxM Series 3-pin, positive output, low dropout voltage regulator (50 mA type) I Overview The AN80xx series and the AN80xxM series are 3pin, low dropout, fixed positive output type monolithic voltage regulators. Since their power consumption can be minimized, they are suitable for battery-used power supply and reference voltage. 13 types of output voltage are available; 2V, 2.5V, 3V, 3.5V (SSIP003-P-0000 only), 4V, 4.5V, 5V, 6V, 7V, 8V, 8.5V, 9V, and 10V. AN80xx series 5.0±0.2 5.1±0.2 Unit: mm 4.0±0.2 (1.0) 2.3±0.2 0.6±0.15 (1.0) 13.5±0.5 I Features • Input/output voltage difference: 0.3V max. • Output current of up to 50mA • Low bias current: 0.6mA typ. • O.

AN8010M : Voltage Regulators AN80xx/AN80xxM Series 3-pin, positive output, low dropout voltage regulator (50 mA type) I Overview The AN80xx series and the AN80xxM series are 3pin, low dropout, fixed positive output type monolithic voltage regulators. Since their power consumption can be minimized, they are suitable for battery-used power supply and reference voltage. 13 types of output voltage are available; 2V, 2.5V, 3V, 3.5V (SSIP003-P-0000 only), 4V, 4.5V, 5V, 6V, 7V, 8V, 8.5V, 9V, and 10V. AN80xx series 5.0±0.2 5.1±0.2 Unit: mm 4.0±0.2 (1.0) 2.3±0.2 0.6±0.15 (1.0) 13.5±0.5 I Features • Input/output voltage difference: 0.3V max. • Output current of up to 50mA • Low bias current: 0.6mA typ. • O.

AN8011S : Pin No. 1 Symbol CT Description Voltage Regulators Pin for connecting the oscillation frequency setting capacitor for triangular oscillation circuit. Frequecy of triangular oscillation is set by connecting a capacitor between this terminal and GND. Resistor connection pin for setting the oscillation frequency of triangular oscillation circuit. Frequecy of triangular oscillation is set by connecting resistance between the pin and GND "On/Off" pin for turning on/off IC. "Low" stops IC (output off) and "High" operates IC. Inverted input pin for channel 2 error amplifier Output pin for channel 2 error amplifier. Gain setting or phase compensation is performed by connecting resistor or capacit.

AN8013SH : • Supports control over a wide output frequency range: 20 kHz to 500 kHz. CLM 1 • Built-in pulse-by-pulse overcurrent protection circuit 2 RT 3 CT (Detection voltage: VCC − 100 mV) S.C.P. 4 • Built-in timer latch short-circuit protection circuit DTC 5 (charge current 1.3 µA typical) • Incorporating the under-voltage lock-out (U.V.L.O.) circuit • Built-in reference voltage circuit (Error amplifier reference input: 0.75 V (allowance: ±4%)) • Output block is open-collector (darlington) type. • High absolute maximum rating of output current (100 mA) • Duty ratio with small sample-to-sample variations (55% ± 5%). • Adopts a 0.5-mm lead pitch 10-pin small outline package SSOP010-P-0225 +0.1 0.5.

AN8014S : Pin No. 1 2 3 4 5 Description Internal reference output Oscillator timing resistor connection Oscillator timing capacitor connection Dead-time control Capacitance connection for short-circuit protection delay 6 7 8 Error amplifier noninverting input Error amplifier inverting input Error amplifier output Pin No. 9 10 11 12 13 14 15 16 Voltage regulators Description Not connected Overcurrent protection input Signal ground Output stage ground Totem pole type output Bootstrap output Supply voltage On/off control s Absolute Maximum Ratings Parameter Supply voltage Supply current Power dissipation *2 *1 Symbol VCC ICC PD Topr Tstg VON/OFF VI VDTC VOUT IO IO(Peak) VCB ICB ICBP VCLM Rating 35 .

AN8015SH : Pin No. 1 2 3 4 5 6 7 8 9 10 Symbol CT RT S.C.P. GND Out VCC VREF IN+ IN− FB Description Pin for connecting oscillator timing capacitor Pin for connecting oscillator timing resistor Voltage Regulators Pin for connecting the time constant setting capacitor for short-circuit protection Grounding pin Open collector type output pin Power supply voltage application pin Reference voltage output pin Error amplifier noninverted input pin Error amplifier inverted input pin Output pin of error amplifier s Absolute Maximum Ratings Parameter Supply voltage IN− terminal allowable application voltage IN+ terminal allowable application voltage Output terminal allowable application voltage Collector out.

AN8016 : Pin No. 1 2 3 4 5 6 7 8 9 10 Symbol IN− S.C.P. SS Off VCC Out GND RB OSC FB Description Error amplifier inverting input Time constant capacitor connection for short-circuit protection Soft-start time-constant capacitor connection On/off control Supply voltage Push-pull output Ground Output-current setting resistor connection pin Oscillator circuit timing resistor/capacitor connection pin Error amplifier output 3 S.C.P. SS 3 Voltage Regulators s Absolute Maximum Ratings Parameter Supply voltage Off pin allowable application voltage IN− pin allowable application voltage Out pin allowable application voltage Supply current Output source current Output sink current Power dissipation * AN8.

AN8016NSH : Pin No. 1 2 3 4 5 6 7 8 9 10 Symbol IN− S.C.P. SS Off VCC Out GND RB OSC FB Description Error amplifier inverting input Time constant capacitor connection for short-circuit protection Soft-start time-constant capacitor connection On/off control Supply voltage Push-pull output Ground Output-current setting resistor connection pin Oscillator circuit timing resistor/capacitor connection pin Error amplifier output 3 S.C.P. SS 3 Voltage Regulators s Absolute Maximum Ratings Parameter Supply voltage Off pin allowable application voltage IN− pin allowable application voltage Out pin allowable application voltage Supply current Output source current Output sink current Power dissipation * AN8.

AN8017SA : Pin No. Symbol 1 OSC Description Pin for connecting a oscillation timing resistor and capacitor 2 S.C.P. IN−1 FB1 DT1 RB1 Pin for connecting the time constant setting capacitor for short-circuit protection 3 Inverting input pin to error amplifier 1 block 4 5 6 Output pin of error amplifier 1 block PWM1 block dead-time setting pin Out1 block output source current setting resistor connection pin 7 Out1 Out1 block push-pull type output pin 15 16 Off VREF 12 13 14 DT2 FB2 IN+2 Pin No. Symbol 8 9 10 11 GND VCC Out2 RB2 Description Grounding pin Power supply voltage application pin Out2 block push-pull type output pin Out2 block output source current setting resistor connection pin PWM2 block dea.

AN8018SA : Pin No. Symbol 1 OSC Description Pin for oscillation timing resistor and capacitor connection 2 S.C.P. IN+1 IN−1 FB1 DT1 Out1 Pin for connecting the time constant setting capacitor for short-circuit protection 3 Error amplifier 1 block noninverting input pin 4 5 6 7 Error amplifier 1 block inverting input pin Output pin of error amplifier 1 block PWM1 block dead-time setting pin Out1 block open-collector type output pin 15 16 Off VREF 12 13 14 DT2 FB2 IN+2 Pin No. Symbol 8 9 10 11 GND VCC Out2 RB2 Description Grounding pin Power supply voltage application pin Out2 block push-pull type output pin Out2 block output source current setting resistor connection pin PWM2 block dead-time setting pi.

AN80196CA : of Intel’s thermal impedance test methodology PROCESS INFORMATION These devices are manufactured on P629 5 a CHMOS III-E process Additional process and reliability information is available in Intel’s Components Quality and Reliability Handbook Order Number 210997 et4U.com DataSheet4U.com 272405 – 2 DataShee Figure 2 The 87C196CA CB Familiy Nomenclature Thermal Characteristics Device and Package AN87C196CB (84-Lead PLCC Package) AN87C196CA (68-Lead PLCC Package) iJA 35 0 C W 36 5 C W iJC 11 0 C W 10 0 C W NOTES 1 iJA e Thermal resistance between junction and the surrounding environment (ambient) measurements are taken 1 ft away from case in air flow environment iJC e Thermal resistance.

AN80196CB : of Intel’s thermal impedance test methodology PROCESS INFORMATION These devices are manufactured on P629 5 a CHMOS III-E process Additional process and reliability information is available in Intel’s Components Quality and Reliability Handbook Order Number 210997 et4U.com DataSheet4U.com 272405 – 2 DataShee Figure 2 The 87C196CA CB Familiy Nomenclature Thermal Characteristics Device and Package AN87C196CB (84-Lead PLCC Package) AN87C196CA (68-Lead PLCC Package) iJA 35 0 C W 36 5 C W iJC 11 0 C W 10 0 C W NOTES 1 iJA e Thermal resistance between junction and the surrounding environment (ambient) measurements are taken 1 ft away from case in air flow environment iJC e Thermal resistance.




Since 2006. D4U Semicon,
Electronic Components Datasheet Search Site. (Privacy Policy & Contact)