DatasheetsPDF.com

AN1432 Datasheet PDF


Part Number AN1432
Manufacturer Panasonic Semiconductor
Title Surface-mount Adjustable Output Shunt Regulator
Description AN1431T, AN1431M Surface-mount Adjustable Output Shunt Regulator s Overview The AN1431T and AN1431M are high accuracy stabilized power supplies in...
Features
• High precision reference voltage : 2.5V±2%
• High-temperature stability : 17ppm/˚C typ.
• Output voltage externally adjustable : 2.5 to 36V
• Fast rise
• Low input impedance : 0.2Ω (typ.)
• Low output noise voltage 0.45
  – 0.1 2.54 2.3±0.2 2 3 1 JEDEC : TO-92 (SSIP003-P-0000) s Pin Name 〈AN1431T...

File Size 44.28KB
Datasheet AN1432 PDF File








Similar Ai Datasheet

AN1 : Speed & Position Sensors www.DataSheet.co.kr Datasheet pdf - http://www.DataSheet4U.net/ Cherry sensors deliver unmatched performance and reliability to a High-Performance Sensors for Demanding Environments Cherry offers seven standard sensor product series: broad range of OEM products. At ZF Electronics GmbH, the owner of the Cherry brand, we specialize in  MP — Magnetic Position Sensors  GS — Geartooth Speed Sensors  SD — Geartooth Speed and Direction Sensors  VN — Ferrous Vane Sensors economical sensors that are suitable for the most rigorous environments, including extremes of temperature,  AN — Angular Position Sensors  AS — Magnetic Actuators and Mating Connectors www.D.

AN1 : .

AN1001 : www.DataSheet4U.com AN1001 Vishay Siliconix LITTLE FOOTR TSSOP-8 The Next Step in Surface-Mount Power MOSFETs Wharton McDaniel and David Oldham When Vishay Siliconix introduced its LITTLE FOOT MOSFETs, it was the first time that power MOSFETs had been offered in a true surface-mount package, the SOIC. LITTLE FOOT immediately found a home in new small form factor disk drives, computers, and cellular phones. This is the low profile demanded by applications such as PCMCIA cards. It reduces the power package to the same height as many resistors and capacitors in 0805 and 0605 sizes. It also allows placement on the “passive” side of the PC board. The standard pinouts of the LITTLE FOOT TSSOP-.

AN1003 : Teccor® brand Thyristors AN1003 Introduction Due to high-volume production techniques, Thyristors are now priced so that almost any electrical product can benefit from electronic control. A look at the fundamentals of SCR and Triac phase controls shows how this is possible. Output Power Characteristics Phase control is the most common form of Thyristor power control. The Thyristor is held in the off condition -- that is, all current flow in the circuit is blocked by the Thyristor except a minute leakage current. Then the Thyristor is triggered into an “on” condition by the control circuitry. For full-wave AC control, a single Triac or two SCRs connected in inverse parallel may be used. One of.

AN101 : .

AN103 : www.DataSheet4U.com AN103 The FET Constant-Current Source/Limiter Introduction The combination of low associated operating voltage and high output impedance makes the FET attractive as a constant-current source. An adjustable-current source (Figure 1) may be built with a FET, a variable resistor, and a small battery. For optimum thermal stability, the FET should be biased near the zero temperature coefficient point. D S RL RS – + A change in supply voltage or a change in load impedance, will change ID by only a small factor because of the low output conductance goss. DID = (DVDS)(goss) (3) The value of goss is an important consideration in the accuracy of a constant-current source where.

AN1042 : AN1042/D High Fidelity Switching Audio Amplifiers Using TMOS Power MOSFETs Prepared by: Donald E. Pauly ON Semiconductor Special Consultant http://onsemi.com APPLICATION NOTE With the introduction of complementary bipolar power transistors in the late 1960s, switching amplifiers became theoretically practical. At low frequencies, bipolar transistors have switching efficiencies of 99% and will directly drive a low impedance speaker filter. The requirement for switching frequencies above 100 kHz resulted in excessive losses however. Bipolar drive circuitry was also complex because of its large base current requirement. With the advent of complementary (voltage/current ratings) TMOS power MOSF.

AN1042D : AN1042/D High Fidelity Switching Audio Amplifiers Using TMOS Power MOSFETs Prepared by: Donald E. Pauly ON Semiconductor Special Consultant http://onsemi.com APPLICATION NOTE With the introduction of complementary bipolar power transistors in the late 1960s, switching amplifiers became theoretically practical. At low frequencies, bipolar transistors have switching efficiencies of 99% and will directly drive a low impedance speaker filter. The requirement for switching frequencies above 100 kHz resulted in excessive losses however. Bipolar drive circuitry was also complex because of its large base current requirement. With the advent of complementary (voltage/current ratings) TMOS power MOSF.

AN1043 : The I/O port is highly configurable for maximum flexibility. Figure 1 is a simplified block diagram of an I/O port pin. The port can either drive logic levels on the pin, or read logic levels from the pad. The level on the pad can be read at any time, regardless if the pin is configured as an input or an output. The IODIR register controls the direction of the pins (input or output). More specifically, the IODIR registers simply enables/disables the output driver. When the driver is activated (IODIR = 0), the pad is driven to the state in the latch register (OLAT). When deactivated (IODIR = 1), the driver is high impedance. The I/O port has multiple, individual configurations. Each pin can .

AN1048 : AN1048/D RC Snubber Networks For Thyristor Power Control and Transient Suppression By George Templeton Thyristor Applications Engineer http://onsemi.com APPLICATION NOTE INTRODUCTION Edited and Updated RC networks are used to control voltage transients that could falsely turn-on a thyristor. These networks are called snubbers. The simple snubber consists of a series resistor and capacitor placed around the thyristor. These components along with the load inductance form a series CRL circuit. Snubber theory follows from the solution of the circuit’s differential equation. Many RC combinations are capable of providing acceptable performance. However, improperly used snubbers can cause unrel.

AN1048D : AN1048/D RC Snubber Networks For Thyristor Power Control and Transient Suppression By George Templeton Thyristor Applications Engineer http://onsemi.com APPLICATION NOTE INTRODUCTION Edited and Updated RC networks are used to control voltage transients that could falsely turn-on a thyristor. These networks are called snubbers. The simple snubber consists of a series resistor and capacitor placed around the thyristor. These components along with the load inductance form a series CRL circuit. Snubber theory follows from the solution of the circuit’s differential equation. Many RC combinations are capable of providing acceptable performance. However, improperly used snubbers can cause unrel.

AN105 : www.DataSheet4U.com AN105 FETs As VoltageĆControlled Resistors Introduction: The Nature of VCRs A voltage-controlled resistor (VCR) may be defined as a three-terminal variable resistor where the resistance value between two of the terminals is controlled by a voltage potential applied to the third. For a junction field-effect transistor (JFET) under certain operating conditions, the resistance of the drain-source channel is a function of the gate-source voltage alone and the JFET will behave as an almost pure ohmic resistor. Maximum drain-source current, IDSS, and minimum resistance rDS(on), will exist when the gate-source voltage is equal to zero volts (VGS = 0). If the gate voltage is in.

AN1096 : The purpose of the program is to show individual features of the SPI protocol and give code samples of the instructions and addressing schemes so that the basic building blocks of a program can be shown. The firmware performs the following operations: • • • • • • Low-Density Byte Write Low-Density Byte Read Low-Density Page Write Low-Density Sequential Read Write Enable WIP Polling In addition, the following operations are available but not explicitly illustrated: • • • • • • • High-Density Byte Write High-Density Byte Read High-Density Page Write High-Density Sequential Read Write Disable Read Status Register Write Status Register The low-density routines are intended for use with the 4K .

AN10981 : second issue Modifications: • • TEA1738GT added throughout the application note. Position of RT1 and R17 changed on Figure 1 and Figure 22. v.1 20101206 first issue Contact information For more information, please visit: http://www.nxp.com For sales office addresses, please send an email to: salesaddresses@nxp.com AN10981 All information provided in this document is subject to legal disclaimers. © NXP B.V. 2011. All rights reserved. Application note Rev. 1.1 — 18 April 2011 2 of 44 NXP Semiconductors AN10981 GreenChip TEA1738 series fixed frequency flyback controller 1. Introduction The TEA1738 is a fixed frequency flyback controller that can be used for Discontinuous Conduction.

AN10E40 : .... 19 Package Pin Electrical Characterization . 22 Powers, Grounds and Bypassing .... 22 Recommended Configuration for Power & Ground ....

AN11 : AN1x is a family of AND-NOR circuits consisting of two 2-input AND gates into a 2-input NOR gate. Logic Symbol A B C D Truth Table A B CDQ AN1x L X L XH LXXLH Q X L L XH XLXLH HHXX L X XHH L HDL Syntax Verilog .. AN1x inst_name (Q, A, B, C, D); VHDL.... inst_name: AN1x port map (Q, A, B, C, D); Pin Loading Pin Name A B C D AN11 1.0 1.0 1.0 1.0 Equivalent Loads AN12 AN14 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 AN16 2.1 2.1 2.1 2.1 Size And Power Characteristics Power Characteristicsa Cell Equivalent Gates Static IDD (TJ = 85°C) (nA) EQLpd (Eq-load) AN11 2.0 TBD 2.3 AN12 4.0 TBD 6.3 AN14 4.0 TBD 7.9 AN16 8.0 TBD 14.7 a. See .

AN11012 : first issue Contact information For more information, please visit: http://www.nxp.com For sales office addresses, please send an email to: salesaddresses@nxp.com AN11012 All information provided in this document is subject to legal disclaimers. © NXP B.V. 2011. All rights reserved. Application note Rev. 1 — 30 March 2011 2 of 36 NXP Semiconductors AN11012 Using the TEA1703 to reduce standby power 1. Introduction The number of electronic products used today in private homes and offices is constantly increasing. Most products, such as: audio equipment, TVs, digital cable receivers, DVD/Blu ray recorders, computers, printers, etc. consume a considerable amounts of electrical power while.




Since 2006. D4U Semicon,
Electronic Components Datasheet Search Site. (Privacy Policy & Contact)