DatasheetsPDF.com

UPC1652G Datasheet PDF


Part Number UPC1652G
Manufacturer NEC
Title SILICON MONOLITHIC BIPOLAR INTEGRATED CIRCUIT WIDE BAND AMPLIFIER
Description The µPC1652G is a silicon monolithic integrated circuit especially designed as a wide band amplifier convering HF band through UHF band. INPUT GND...
Features
• Excellent frequency response : 1 200 MHz TYP. @ 3 dB down
• High power gain : 18 dB TYP. @ f = 500 MHz
• Low voltage operation : VCC = 5 V
• SOP package ABSOLUTE MAXIMUM RATINGS (TA = +25 °C) Supply Voltage Total Power dissipation Operating Ambient Temperature Storage Temperature VCC PD TA Tstg 7...

File Size 40.66KB
Datasheet UPC1652G PDF File








Similar Ai Datasheet

UPC1651G : This Material Copyrighted By Its Respective Manufacturer This Material Copyrighted By Its Respective Manufacturer .

UPC1654 : The UPC1654A Silicon Microwave Monolithic IC is designed for general purpose and IF amplifier applications. This amplifier is matched to 50 Ω and is cascadable for multi-stage applications. The UPC1654A features excellent linearity with 10 dBm saturated output power and broadband performance up to 1100 MHz. Reliability and performance uniformity are assured by NEC's stringent quality control procedures. The UPC1654A is available in a hermetically sealed package. ELECTRICAL CHARACTERISTICS (TA = 25°C, VCC = 10 V, f = 500 MHz) PART NUMBER PACKAGE OUTLINE SYMBOLS ICC GS BW PSAT NF RLIN RLOUT ISOL RTH (J-C) PARAMETERS AND CONDITIONS Operating Current Small Signal Gain Bandwidth (The gain is 3 d.

UPC1656 : The UPC1656C is a silicon monolithic integrated circuit especially designed as a wide-band amplifier covering the HF band through UHF band. NEC's stringent quality assurance and test procedures ensure the highest reliability and performance. Frequency, f (MHz) ELECTRICAL CHARACTERISTICS (TA = 25°C, VCC = 10 V, f = 500 MHz) PART NUMBER PACKAGE OUTLINE SYMBOLS ICC GS BW PSAT NF RLIN RLOUT ISOL PARAMETERS AND CONDITIONS Circuit Current Small Signal Gain Bandwidth (The gain is 3 dB down from the gain at 100 MHz) Saturated Output Power Noise Figure Input Return Loss Output Return Loss Isolation UNITS mA dB MHz dBm dB dB dB dB 17 4 24 MIN 38 17 750 9 UPC1656C C08 TYP 43 19 850 10.5 5.5 20 7 27 6.

UPC1658G : The µPC1658G is a silicon monolithic integrated circuit designed as amplifier for high frequency system applications. Bandwidth and output power level can be determined according to external resistor constants of negative feedback and final stage collector. This IC is available in 8-pin plastic SOP. This IC is manufactured using NEC’s 10 GHz fT NESATTM II silicon bipolar process. This process uses silicon nitride passivation film and gold electrodes. These materials can protect chip surface from external pollution and prevent corrosion/migration. Thus, this IC has excellent performance, uniformity and reliability. FEATURES • Low noise figure resistance constants. : GP ≥ 40 dB @ Without nega.

UPC1658G-E1 : The µPC1658G is a silicon monolithic integrated circuit designed as amplifier for high frequency system applications. Bandwidth and output power level can be determined according to external resistor constants of negative feedback and final stage collector. This IC is available in 8-pin plastic SOP. This IC is manufactured using NEC’s 10 GHz fT NESATTM II silicon bipolar process. This process uses silicon nitride passivation film and gold electrodes. These materials can protect chip surface from external pollution and prevent corrosion/migration. Thus, this IC has excellent performance, uniformity and reliability. FEATURES • Low noise figure resistance constants. : GP ≥ 40 dB @ Without nega.

UPC1663 : The µPC1663 is a differential input, differential output wideband amplifier IC that uses an high frequency silicon bipolar process. This process improves bandwidth phase characteristics, input noise voltage characteristics, and low power consumption when compared to conventional HF-band differential amplifier ICs. These features make this device suitable as a wideband amplifier in high-definition TVs, high-resolution monitors, broadcasting satellite receivers, and video cameras, as a sense amplifier in high-density CCD and optical pick-up products, or as a pulse amplifier for optical data links. TM These ICs are manufactured using NEC’s 6 GHz fT NESAT I silicon bipolar process. This process .

UPC1663G : The UPC1663G is a video amplifier with differential input and output stages. A high frequency process (fT = 6 GHz) improves AC performance compared with industry-standard video amplifiers. This device is excellent as a sense amplifier for highdensity CCDs, as a video or pulse amplifier in high-resolution displays, and in communications equipment. 100 k 1M 10 M 100 M Frequency, f (Hz) ELECTRICAL CHARACTERISTICS (TA = 25°C, VCC = ±6 V, RS = 50 Ω, f = 10 MHz) SYMBOLS ICC AVd BW tR tpd RIN CIN IIO IB VN VI CMRR SVRR VO(off) PART NUMBER PACKAGE OUTLINE PARAMETERS AND CONDITIONS Power Supply Current Gain1 Gain2 Bandwidth (Gain is 3 dB down from the gain at 100 KHz) Rise Time, VOUT = 1Vp-p: D.

UPC1663GV : NEC's UPC1663GV is a video amplifier with differential input and output stages. A high frequency process (fT = 6 GHz) improves AC performance compared with industry-standard video amplifiers. This device is excellent as a sense amplifier for high-density CCDs, as a video or pulse amplifier in highresolution displays, and in communications equipment. Single Ended Voltage Gain, AVS (dB) SINGLE ENDED VOLTAGE GAIN vs. FREQUENCY 60 50 Gain 1 40 30 20 Gain 2 10 0 100 k 1 M 10 M Frequency, f (Hz) 100 M ELECTRICAL CHARACTERISTICS (TA = 25°C, VCC = ±6 V, RS = 50 Ω, f = 10 MHz) PART NUMBER PACKAGE OUTLINE SYMBOLS PARAMETERS AND CONDITIONS UNITS MIN ICC Power Supp.

UPC1664 : .

UPC1675G : The µPC1675G is a silicon monolithic integrated circuit employing small package (4pins mini mold) and designed for use as a wide bnad amplifier convers from HF band to UHF band. FEATURES • Excellent frequency response : 1.9 GHz TYP. @ 3 dB down below flat gain. • High isolation. • Super small package. • Uni- and low voltage operation : VCC = 5 V • Input and output matching 50 Ω. ABSOLUTE MAXIMUM RATINGS (TA = 25 °C) Supply Voltage Total Power Dissipation Operating Temperature Storage Temperature VCC PT Topt Tstg 6 200 −40 to +85 −55 to +150 V mW °C °C ELECTRICAL CHARACTERISTICS (TA = 25 °C, VCC = 5 V) CHARACTERISTIC Circuit Current Power Gain Noise Figure Upper Limit Operating Frequency I.

UPC1676B : The UPC1676 is a silicon monolithic integrated circuit designed for wide-band amplifiers covering the VHF to UHF bands. The series is available in two package styles: a surface mount package (UPC1676G), and an 8 lead ceramic flat package (UPC1676B). Also available in chip form (UPC1676P). NEC's stringent quality assurance and test procedures ensure the highest reliability and performance. Frequency, f (MHz) ELECTRICAL CHARACTERISTICS (TA = 25°C, VCC = 5 V, f = 500 MHz) PART NUMBER PACKAGE OUTLINE SYMBOLS ICC GS PSAT BW NF RLIN RLOUT ISOL RTH(J-C) PARAMETERS AND CONDITIONS Supply Current Small Signal Gain Saturated Output Power Bandwidth 3 dB down from gain at 100 MHz Noise Figure Input Ret.

UPC1676G : The µPC1676G is a silicon monolithic integrated circuit employing small package (4pins mini mold) and designed for use as a wide band amplifier covers from HF band to UHF band. FEATURES • Excellent frequency response : 1.2 GHz TYP. @ 3 dB down below flat gain. • High power gain : 22 dB TYP. @ f = 0.5 GHz. • High isolation. • Super small package. • Uni- and low voltage operation : VCC = 5 V • Input and output matching 50 Ω. ABSOLUTE MAXIMUM RATINGS (TA = 25 °C) Supply Voltage Total Power Dissipation Operating Temperature Storage Temperature VCC PT Topt Tstg 6 200 −40 to +85 −55 to +150 V mW °C °C ELECTRICAL CHARACTERISTICS (TA = 25 °C, VCC = 5 V) CHARACTERISTIC Circuit Current Power Gain N.

UPC1676P : The UPC1676 is a silicon monolithic integrated circuit designed for wide-band amplifiers covering the VHF to UHF bands. The series is available in two package styles: a surface mount package (UPC1676G), and an 8 lead ceramic flat package (UPC1676B). Also available in chip form (UPC1676P). NEC's stringent quality assurance and test procedures ensure the highest reliability and performance. Frequency, f (MHz) ELECTRICAL CHARACTERISTICS (TA = 25°C, VCC = 5 V, f = 500 MHz) PART NUMBER PACKAGE OUTLINE SYMBOLS ICC GS PSAT BW NF RLIN RLOUT ISOL RTH(J-C) PARAMETERS AND CONDITIONS Supply Current Small Signal Gain Saturated Output Power Bandwidth 3 dB down from gain at 100 MHz Noise Figure Input Ret.

UPC1677 : The UPC1677 is a silicon monolithic integrated circuit designed as a wide-band amplifier covering the HF to UHF bands. The device features high output power, 19.5 dBm typical, high gain, 24 dB typical and operates from a single 5 volt supply. The UPC1677 is available in an 8 lead ceramic flat package (UPC1677B). NEC's stringent quality assurance and test procedures ensure the highest reliability and performance. -40 100 500 1000 3000 Frequency, f (MHz) ELECTRICAL CHARACTERISTICS (TA = 25°C, VCC = 5 V, f = 500 MHz) PART NUMBER PACKAGE OUTLINE SYMBOLS ICC GS PSAT BW NF RLIN RLOUT ISOL ∆ GT RTH (J-A)1 RTH (J-C) PARAMETERS AND CONDITIONS Circuit Current (No Input) Small Signal Gain Satura.

UPC1677B : The UPC1677 is a silicon monolithic integrated circuit designed as a wide-band amplifier covering the HF to UHF bands. The device features high output power, 19.5 dBm typical, high gain, 24 dB typical and operates from a single 5 volt supply. The UPC1677 is available in an 8 lead ceramic flat package (UPC1677B). NEC's stringent quality assurance and test procedures ensure the highest reliability and performance. -40 100 500 1000 3000 Frequency, f (MHz) ELECTRICAL CHARACTERISTICS (TA = 25°C, VCC = 5 V, f = 500 MHz) PART NUMBER PACKAGE OUTLINE SYMBOLS ICC GS PSAT BW NF RLIN RLOUT ISOL ∆ GT RTH (J-A)1 RTH (J-C) PARAMETERS AND CONDITIONS Circuit Current (No Input) Small Signal Gain Satura.

UPC1678B : .




Since 2006. D4U Semicon,
Electronic Components Datasheet Search Site. (Privacy Policy & Contact)