DatasheetsPDF.com

PI74ALVCH16244 Datasheet PDF


Part Number PI74ALVCH16244
Manufacturer Pericom Semiconductor Corporation
Title 16-Bit Buffer Driver with 3-State Outputs
Description Pericom Semiconductor’s PI74ALVCH16244 is an non-inverting 16-bit buffer/driver designed for low-voltage 2.3V to 3.6V VCC operation. The buffer/dr...
Features







• Designed for low-voltage operation VCC = 2.3V to 3.6V Hysteresis on all inputs Typical VOLP (Output Ground Bounce) 0.8V at VCC = 3.3V, TA = 25°C Typical VOHV (Output VOH Undershoot) 2.0V at VCC = 3.3V, TA = 25°C Bus Hold retains last active bus state during 3-State, eliminating t...

File Size 130.84KB
Datasheet PI74ALVCH16244 PDF File








Similar Ai Datasheet

PI74ALVCH16244A : Pericom Semiconductor’s PI74ALVCH16244 is an non-inverting 16-bit buffer/driver designed for low-voltage 2.3V to 3.6V VCC operation. The buffer/driver is designed specifically to improve both the performance and density of 3-State memory address drivers, clock drivers, and bus-oriented receivers and transmitters. The device can be used as four 4-bit buffers, two 8-bit buffers, or one 16-bit buffer. It provides non-inverting outputs and symmetrical active-low output-enable (OE) inputs. To ensure the high-impedance state during power up or power down, OE should be tied to VCC through a pullup resistor in which the minimum value is determined by the current-sinking capability of the driver. The.

PI74ALVCH16245 : Pericom Semiconductor’s PI74ALVCH series of logic circuits are produced using the Company’s advanced 0.5 micron CMOS technology, achieving industry leading speed grades. The PI74ALVCH16245 is a 16-bit bidirectional transceiver designed for asynchronous two-way communication between data buses. The direction control input pin (xDIR) determines the direction of data flow through the bidirectional transceiver. The Direction and Output Enable controls are designed to operate this device as either two independent 8-bit transceivers or one 16-bit transceiver. The output enable (OE) input, when HIGH, disables both A and B ports by placing them in HIGH Z condition. To ensure the high-impedance state.




Since 2006. D4U Semicon,
Electronic Components Datasheet Search Site. (Privacy Policy & Contact)