DatasheetsPDF.com

74VCX16373 Datasheet PDF

Fairchild Semiconductor
Part Number 74VCX16373
Manufacturer Fairchild Semiconductor
Title Low Voltage 16-Bit Transparent Latch with 3.6V Tolerant Inputs and Outputs
Description The VCX16373 contains sixteen non-inverting latches with 3-STATE outputs and is intended for bus oriented applications. The device is byte control...
Features s 1.2V to 3.6V VCC supply operation s 3.6V tolerant inputs and outputs s tPD (In to On) 3.0 ns max for 3.0V to 3.6V VCC s Power-off high impedance inputs and outputs s Support live insertion and withdrawal (Note 1) s Static Drive (IOH/IOL) r24 mA @ 3.0V VCC s Uses patented noise/EMI reduction circ...

File Size 152.95KB
Datasheet PDF File 74VCX16373 PDF File


74VCX16373 74VCX16373 74VCX16373




Similar Ai Datasheet

74VCX1632245 : The 74VCX1632245 is a dual supply low voltage CMOS 16-BIT BUS TRANSCEIVER fabricated with sub-micron silicon gate and five-layer metal wiring C2MOS technology. Designed for use as an interface between a 3.3V bus and a 2.5V or 1.8V bus in a mixed 3.3V/1.8V,3.3V/2.5V and 2.5V/ 1.8V supply systems, it achieves high speed operation while maintaining the CMOS low power dissipation. This IC is intended for two-way asynchronous communication between data buses and the direction of data transmission is determined by nDIR inputs. The enable inputs nG can be used to disable the device so that the buses are effectively March 2005 n = 1, 2 Rev. 14 1/18 74VCX1632245 Figure 2: Input And Output Equivale.

74VCX163245 : The VCX162839 contains twenty non-inverting selectable buffered or registered paths. The device can be configured to operate in a registered, or flow through buffer mode by utilizing the register enable (REGE) and Clock (CP) signals. The device operates in a 20-bit word wide mode. All outputs can be placed into 3-STATE through use of the OE pin. These devices are ideally suited for buffered or registered 168 pin and 200 pin SDRAM DIMM memory modules. The 74VCX162839 is designed for low voltage (1.65V to 3.6V) VCC applications with I/O compatibility up to 3.6V. The 74VCX162839 is also designed with 26Ω series resistors in the outputs. This design reduces line noise in applications such as mem.

74VCX16373 : www.DataSheet4U.com 74VCX16373 Low−Voltage 1.8/2.5/3.3V 16−Bit Transparent Latch With 3.6 V−Tolerant Inputs and Outputs (3−State, Non−Inverting) The 74VCX16373 is an advanced performance, non−inverting 16−bit transparent latch. It is designed for very high−speed, very low−power operation in 1.8 V, 2.5 V or 3.3 V systems. The VCX16373 is byte controlled, with each byte functioning identically, but independently. Each byte has separate Output Enable and Latch Enable inputs. These control pins can be tied together for full 16−bit operation. When operating at 2.5 V (or 1.8 V) the part is designed to tolerate voltages it may encounter on either inputs or outputs when interfacing to 3.3 V busses..

74VCX16374 : The VCX16374 contains sixteen non-inverting D-type flipflops with 3-STATE outputs and is intended for bus oriented applications. The device is byte controlled. A buffered clock (CP) and output enable (OE) are common to each byte and can be shorted together for full 16-bit operation. The 74VCX16374 is designed for low voltage (1.2V to 3.6V) VCC applications with I/O compatibility up to 3.6V. The 74VCX16374 is fabricated with an advanced CMOS technology to achieve high speed operation while maintaining low CMOS power dissipation. Features s 1.2V to 3.6V VCC supply operation s 3.6V tolerant inputs and outputs s tPD 3.0 ns max for 3.0V to 3.6V VCC s Power-off high impedance inputs and outputs .

74VCX16374 : www.DataSheet4U.com 74VCX16374 Low−Voltage 1.8/2.5/3.3V 16−Bit D−Type Flip−Flop With 3.6 V−Tolerant Inputs and Outputs (3−State, Non−Inverting) The 74VCX16374 is an advanced performance, non−inverting 16−bit D−type flip−flop. It is designed for very high−speed, very low−power operation in 1.8 V, 2.5 V or 3.3 V systems. The VCX16374 is byte controlled, with each byte functioning identically, but independently. Each byte has separate Output Enable and Clock Pulse inputs. These control pins can be tied together for a full 16−bit operation. When operating at 2.5 V (or 1.8 V) the part is designed to tolerate voltages it may encounter on either inputs or outputs when interfacing to 3.3 V busses..




Since 2006. D4U Semicon,
Electronic Components Datasheet Search Site. (Privacy Policy & Contact)