DatasheetsPDF.com

LTC1265 Datasheet PDF

Linear Technology
Part Number LTC1265
Manufacturer Linear Technology
Title 1.2A/ High Efficiency Step-Down DC/DC Converter
Description LTC1265/LTC1265-3.3/LTC1265-5 1.2A, High Efficiency Step-Down DC/DC Converter FEATURES s s DESCRIPTIO s s s s s s s s High Efficiency: Up to 9...
Features s s DESCRIPTIO s s s s s s s s High Efficiency: Up to 95% Current Mode Operation for Excellent Line and Load Transient Response Internal 0.3Ω Power Switch (VIN = 10V) Short-Circuit Protection Low Dropout Operation: 100% Duty Cycle Low-Battery Detector Low 160µA Standby Current at Light Loads Acti...

File Size 226.61KB
Datasheet PDF File LTC1265 PDF File


LTC1265 LTC1265 LTC1265




Similar Ai Datasheet

LTC1232 : U U FEATURES ■ Guaranteed Reset Assertion at VCC = 1V ■ 8-Pin SO Plastic Package ■ 2.0mA Maximum Supply Current ■ 4.62V/4.37V Precision Voltage Monitor ■ Power OK/Reset Time Delay: 600ms ■ Minimum External Component Count ■ Superior Upgrade for DS1232 U APPLICATIO S ■ Critical µP Power Monitoring ■ Intelligent Instruments ■ Computers and Controllers ■ Automotive Systems LTC1232 Microprocessor Supervisory Circuits DESCRIPTIO The LTC®1232 provides power supply monitoring, watchdog timing and external reset for microprocessor systems. A precise internal voltage reference and comparator circuit monitor the power supply line. When an out-of-tolerance condition occurs, the reset outputs are forc.

LTC1235 : The LTC®1235 provides complete power supply monitoring and battery control functions for microprocessor reset, battery backup, RAM write protection, power failure warning and watchdog timing. The LTC1235 has all the LTC695 features plus conditional battery backup and external reset control. When an out-of-tolerance power supply condition occurs, the reset outputs are forced to active states and the Chip Enable output write-protects external memory. The RESET output is guaranteed to remain logic low with VCC as low as 1V. External reset control is provided by a debounced pushbutton reset input. The LTC1235 powers the active CMOS RAMs with a charge pumped NMOS power switch to achieve low dropo.

LTC1250 : U U FEATURES ■ Very Low Noise: 0.75µVP-P Typ, 0.1Hz to 10Hz ■ DC to 1Hz Noise Lower Than OP-07 ■ Full Output Swing into 1k Load ■ Offset Voltage: 10µV Max ■ Offset Voltage Drift: 50nV/°C Max ■ Common Mode Rejection Ratio: 110dB Min ■ Power Supply Rejection Ratio: 115dB Min ■ No External Components Required ■ Pin Compatible with Standard 8-Pin Op Amps ■ Available in Standard 8-Pin Plastic DIP and 8-Pin SO Packages U APPLICATIO S ■ Electronic Scales ■ Strain Gauge Amplifiers ■ Thermocouple Amplifiers ■ High Resolution Data Acquisition ■ Low Noise Transducers ■ Instrumentation Amplifiers , LTC and LT are registered trademarks of Linear Technology Corporation. All other trademarks are the prope.

LTC1255 : LTC1255 Dual 24V High-Side MOSFET Driver FEATURES s s s s s s s s s DESCRIPTIO Fully Enhances N-Channel Power MOSFETs 12µA Standby Current Operates at Supply Voltages from 9V to 24V Short Circuit Protection Easily Protected Against Supply Transients Controlled Switching ON and OFF Times No External Charge Pump Components Compatible With Standard Logic Families Available in 8-Pin SOIC The LTC1255 dual high-side driver allows using low cost N-channel FETs for high-side industrial and automotive switching applications. An internal charge pump boosts the gate drive voltage above the positive rail, fully enhancing an N-channel MOS switch with no external components. Low power operation, with 1.

LTC1257 : The LTC®1257 is a complete single supply, 12-bit voltage output D/A converter (DAC) in an SO-8 package. The LTC1257 includes an output buffer amplifier, 2.048V voltage reference and an easy to use 3-wire cascadable serial interface. An external reference can be used to override the internal reference and extend the output voltage range to 12V. The power supply current is a low 350µA when operating from a 5V supply, making the LTC1257 ideal for battery-powered applications. The space-saving 8-pin SO package and operation with no external components provide the smallest 12-bit D/A system available. L, LT, LTC, LTM, Linear Technology and the Linear logo are registered trademarks of Linear Techn.

LTC1258 : LTC1258 Series Micropower Low Dropout References FEATURES s s s s s s s s DESCRIPTIO 200mV Max Dropout at 10mA Output Current 4µA Typical Quiescent Current 0.15% Max Initial Accuracy (S8) No Output Capacitor Required Output Sources 10mA, Sinks 2mA 40ppm/°C Max Drift (S8) Available in Small MSOP Package Voltage Options: 2.5V, 3V, 4.1V, 5V and Adjustable The LTC®1258/LTC1258-2.5/LTC1258-3/LTC1258-4.1/ LTC1258-5 are micropower bandgap references that combine high accuracy and low drift with very low supply current and small package size. The combination of ultralow quiescent current and low dropout voltage of only 200mV max. makes them ideal for battery-powered equipment. The output voltage .

LTC1261 : LTC1261 Switched Capacitor Regulated Voltage Inverter FEATURES s s s s s s s s s s DESCRIPTIO Regulated Negative Voltage from a Single Positive Supply Can Provide Regulated – 5V from a 3V Supply REG Pin Indicates Output is in Regulation Low Output Ripple: 5mV Typ Supply Current: 600µA Typ Shutdown Mode Drops Supply Current to 5µA Up to 15mA Output Current Adjustable or Fixed Output Voltages Requires Only Three or Four External Capacitors Available in SO-8 Packages APPLICATI s s s s S GaAs FET Bias Generators Negative Supply Generators Battery-Powered Systems Single Supply Applications The LTC®1261 is a switched-capacitor voltage inverter designed to provide a regulated negative voltage.

LTC1261L : LTC1261L Switched Capacitor Regulated Voltage Inverter FEATURES s s s s s s s s s DESCRIPTIO Regulated Negative Voltage from a Single Positive Supply REG Pin Indicates Output is in Regulation Adjustable or Fixed Output Voltages Output Regulation: ±3.5% Supply Current: 650µA Typ Shutdown Mode Drops Supply Current to 5µA Up to 20mA Output Current Requires Only Three or Four External Capacitors Available in MS8 and SO-8 Packages U APPLICATIO S s s s s The LTC®1261L is a switched-capacitor voltage inverter designed to provide a regulated negative voltage from a single positive supply. The LTC1261L operates from a single 2.7V to 5.25V supply and provides an adjustable output voltage from –1.2.

LTC1262 : 0.300 – 0.325 (7.62.

LTC1263 : The LTC ®1263 is a regulated 12V, 60mA output DC/DC converter. It provides the 12V ± 5% output necessary to program double byte-wide flash memories. The output provides 60mA from input voltages as low as 4.75V without using any inductors. Only four external capacitors are required to complete an extremely small, surface mountable circuit. The output can be momentarily shorted to ground without damaging the part. The active high TTL compatible Shutdown pin can be directly connected to a microprocessor. In the shutdown mode, the supply current typically drops to 0.5µA. The LTC1263 is available in an 8-pin SO package. , LTC and LT are registered trademarks of Linear Technology Corporation. Gua.

LTC1264 : LTC1264 High Speed, Quad Universal Filter Building Block FEATURES s s s s s s s s DESCRIPTIO High Speed, Up to 250kHz Center Frequency Four Identical Filters in a 0.3" Wide Package Clock-to-Center Frequency Ratio of 20:1 Double-Sampling, Improved Aliasing Operates from ± 2.37V to ± 8V Power Supplies Customized Version with Internal Resistors Available Low Noise Low Harmonic Distortion The LTC ®1264 consists of four identical, high speed 2nd order switched-capacitor filter building blocks designed for center frequencies up to 250kHz. Each building block, together with three to five resistors, can provide 2nd order functions like lowpass, highpass, bandpass and notch. The center frequency o.

LTC1264-7 : LTC1264-7 Linear Phase, Group Delay Equalized, 8th Order Lowpass Filter FEATURES s s s s s DESCRIPTIO s s Steeper Roll-Off Than Bessel Filters High Speed: fC ≤ 200kHz Phase Equalized Filter in a 14-Pin Package Phase and Group Delay Response Fully Tested Transient Response Exhibits 5% Overshoot and No Ringing 65dB THD or Better Throughout a 100kHz Passband No External Components Needed The LTC1264-7 is a clock-tunable monolithic 8th order lowpass filter with linear passband phase and flat group delay. The amplitude response approximates a maximally flat passband and exhibits steeper roll-off than an equivalent 8th order Bessel filter. For instance, at twice the cutoff frequency the filter.

LTC1265-3.3 : LTC1265/LTC1265-3.3/LTC1265-5 1.2A, High Efficiency Step-Down DC/DC Converter FEATURES s s DESCRIPTIO s s s s s s s s High Efficiency: Up to 95% Current Mode Operation for Excellent Line and Load Transient Response Internal 0.3Ω Power Switch (VIN = 10V) Short-Circuit Protection Low Dropout Operation: 100% Duty Cycle Low-Battery Detector Low 160µA Standby Current at Light Loads Active-High Micropower Shutdown: IQ 15µA Peak Inductor Current Independent of Inductor Value Available in 14-pin SO Package The LTC®1265 is a monolithic step-down current mode DC/DC converter featuring Burst Mode TM operation at low output current. The LTC1265 incorporates a 0.3Ω switch (VIN =10V) allowing up to.

LTC1265-5 : LTC1265/LTC1265-3.3/LTC1265-5 1.2A, High Efficiency Step-Down DC/DC Converter FEATURES s s DESCRIPTIO s s s s s s s s High Efficiency: Up to 95% Current Mode Operation for Excellent Line and Load Transient Response Internal 0.3Ω Power Switch (VIN = 10V) Short-Circuit Protection Low Dropout Operation: 100% Duty Cycle Low-Battery Detector Low 160µA Standby Current at Light Loads Active-High Micropower Shutdown: IQ 15µA Peak Inductor Current Independent of Inductor Value Available in 14-pin SO Package The LTC®1265 is a monolithic step-down current mode DC/DC converter featuring Burst Mode TM operation at low output current. The LTC1265 incorporates a 0.3Ω switch (VIN =10V) allowing up to.

LTC1266 : U U LTC1266 LTC1266-3.3/LTC1266-5 Synchronous Regulator Controller for N- or P-Channel MOSFETs FEATURES DESCRIPTIO s Ultrahigh Efficiency: Over 95% Possible s Drives N-Channel MOSFET for High Current or P-Channel MOSFET for Low Dropout s Pin Selectable Burst Mode Operation s 1% Output Accuracy (LTC1266A) s Pin Selectable Phase of Topside Driver for Boost or Step-Down Operation s Wide VIN Range: 3.5V to 20V s On-Chip Low-Battery Detector s High Efficiency Maintained Over Large Current Range s Low 170µA Standby Current at Light Loads s Current Mode Operation for Excellent Line and Load Transient Response s Logic Controlled Micropower Shutdown: IQ 40µA s Short-Circuit Protection s Synchro.

LTC1266-3.3 : U U LTC1266 LTC1266-3.3/LTC1266-5 Synchronous Regulator Controller for N- or P-Channel MOSFETs FEATURES DESCRIPTIO s Ultrahigh Efficiency: Over 95% Possible s Drives N-Channel MOSFET for High Current or P-Channel MOSFET for Low Dropout s Pin Selectable Burst Mode Operation s 1% Output Accuracy (LTC1266A) s Pin Selectable Phase of Topside Driver for Boost or Step-Down Operation s Wide VIN Range: 3.5V to 20V s On-Chip Low-Battery Detector s High Efficiency Maintained Over Large Current Range s Low 170µA Standby Current at Light Loads s Current Mode Operation for Excellent Line and Load Transient Response s Logic Controlled Micropower Shutdown: IQ 40µA s Short-Circuit Protection s Synchro.




Since 2006. D4U Semicon,
Electronic Components Datasheet Search Site. (Privacy Policy & Contact)