DatasheetsPDF.com

PM6670A Datasheet PDF


Part Number PM6670A
Manufacturer ST Microelectronics
Title Complete DDR2/3 Memory Power Supplies Controller
Description The device PM6670A is a complete DDR2/3 power supply regulator designed to meet JEDEC specifications. It integrates a Constant On-Time (C.O.T.) bu...
Features switching
■ Switching section (VDDQ)
  – 4.5V to 36V input voltage range
  – 0.9V, ±1% voltage reference
  – 1.8V (DDR2) or 1.5V (DDR3) fixed output voltages
  – 0.9V to 2.6V adjustable output voltage
  – 1.237V ±1% reference voltage available
  – Very fast load transient response using constant-on-time contro...

File Size 427.23KB
Datasheet PM6670A PDF File








Similar Ai Datasheet

PM66 : PROTEK 51-65 WATT MEDICAL SWITCHING POWER SUPPLIES PM66 SERIES ( LV D ) RoHS DE S CR I PT IO N The PM66 series of compact, open PCB constructed, AC-DC switching power supplies are capable of delivering 51 to 65 watts of continuous power. They operate at 90 to 264VAC input voltage without the need of voltage selection. They are ideally suited for use in medical equipment not for life support. All models meet the safety requirements of UL, CSA and IEC. F E AT U R E S www.DataSheet4U.com • Recognized or certified by UL,CS A and TÜV • Small size • 100% burn-in • W i d e i n p u t r a n g e 9 0 t o 2 6 4 VAC • Input surge current protection • O v e r v o l ta g e p r o t e c t i o n • Overcurr.

PM6600 : The PM6600 consists of a high efficiency monolithic boost converter and six controlled current generators (ROWs), specifically designed to supply LEDs arrays used in the backlight of LCD panels. The device can manage a nominal output voltage up to 36 V (i.e. 10 White-LEDs per ROW). The generators can be externally programmed to sink up to 30 mA and they can be dimmed via a PWM signal (1% dimming dutycycle at 20 kHz can be managed). The device allows to detect and manage the open and shorted LED faults and to let unused ROWs floating. Basic protections (Output Over-Voltage, internal MOSFET Over-Current and Thermal Shutdown) are provided. Backlight driver section – Six rows with 30 mA maximum.

PM6602 : The PM6602 consists of a high-efficiency monolithic boost converter and eight controlled current generators (ROWs), specifically designed to supply LED arrays used in the backlights of LCD panels. The device can manage a nominal output voltage of up to 36 V. The generators can be externally programmed to sink up to 30 mA and they can be dimmed in two different modes: via a PWM signal (1% dimming duty-cycle at 20 kHz can be managed) or in SMBus mode. The device can detect and manage the open and shorted LED faults. The device detects the unused ROWs (connected to SGND). Basic protections (output overvoltage, internal MOSFET overcurrent and thermal shutdown) are provided. ■ Applications ■ ■ .

PM6610 : PM6610 2 to 4-cell Li-ion, Li-FePO4 battery charger with SMBus interface, N-channel RBFET and BATFET MOSFET selectors Data brief Features ■ Buck converter – Synchronous buck converter with N- channel high-side, low-side Power )MOSFET integrated drivers t(s– 350 kHz or 700 kHz switching frequency, selectable with SMBus uc– AC adapter input voltage range 9 V - 24 V d– 5 V bias input voltage supply ro– Battery charge voltage range 2.5 V - 18 V P– ±0.5% charge voltage accuracy te– 0.1% cell charge voltage resolution le– ±3% charge current accuracy so– Overvoltage, overcurrent protection b– Battery, inductor, Power MOSFET shortOcircuit protection -– Internal loop compensation network t(s)– In.

PM6641 : The PM6641 is a monolithic voltage regulator module specifically designed to supply DDR2/3 memory and chipset in ultra-mobile PC and real estate constrained portable systems. It integrates three independent, adjustable, constant frequency buck converters, a ±2 Apk Low Drop-Out (LDO) linear regulator and a ±15 mA low noise buffered reference. Each regulator provides basic UV and OV Protections, programmable Soft-Start and Current Limit and active Soft-End. Pulse-Skipping technique is performed to increase efficiency at very light load. Applications ■ ■ ■ DDR2/3 memory and chipset supply UMPC and portable equipment Handheld and PDAs Table 1. Device summary Part number PM6641 PM6641TR Januar.

PM6644 : The PM6644 is a 350 mA valley current limit stepdown regulator capable of delivering an adjustable output voltage in the range between 0.9 V and 8 V. A fixed value of output voltage is also available (3.47 V), saving the external resistor divider. It is housed in a small DFN10 3x3 package. The switching regulator is based on COT (constant-on-time) architecture, that assures fast load transient response; the embedded voltage feed-forward provides nearly constant switching frequency operation. The pulse skipping technique increases efficiency at very light load. The switching frequency can be adjusted from 200 kHz to 600 kHz through a simple resistor. The Table 1. Device summary Part number PM.

PM6652 : The PM6652 is a single phase, step-down SMPS controller with high precision 7 bit DAC. It has been designed to supply the CPU and the graphics core (render engine) of the Intel® mobile platform, according with Intel MVP6.5 specifications. The PM6652 can also be configured to supply the 7-bit family, VR11 compliant, ATOM® processors. The controller, based on constant on-time (COT) architecture, allows real-time dynamic switching of the core operating voltages and frequencies, working in both performance and suspend render states. An embedded integrator control loop compensates the DC voltage error due to the output ripple. The high efficiency at light load, achieved with pulse skipping workin.

PM6670 : The device PM6670 is a complete DDR2/3 power supply regulator designed to meet JEDEC specifications. It integrates a Constant On-Time (C.O.T.) buck controller, a 2Apk sink/source Low Drop Out regulator and a 15mA low noise buffered reference. The C.O.T. architecture assures fast transient response supporting both electrolytic and ceramic output capacitors. An embedded integrator control loop compensates the DC voltage error due to the output ripple. The 2Apk sink/source linear regulator provides the memory termination voltage with fast load transient response. The device is fully compliant with system sleep states S3 and S4/S5, providing LDO output high impedance in Suspend-To-RAM and Tracki.

PM6675A : The PM6675A device consists of a single high efficiency step-down controller and an independent Low Drop-Out (LDO) linear regulator. The Constant On-Time (COT) architecture assures fast transient response supporting both electrolytic and ceramic output capacitors. An embedded integrator control loop compensates the DC voltage error due to the output ripple. Selectable low-consumption mode allows the highest efficiency over a wide range of load conditions. The low-noise mode sets the minimum switching frequency to 33kHz for audio-sensitive applications. The LDO linear regulator can sink and source up to 2Apk. Two fixed current limit (±1A- ±2A) can be chosen. An active Soft-End is independentl.

PM6680 : PM6680 is a dual step-down controller specifically designed to provide extremely high efficiency conversion, with lossless current sensing technique. The constant on-time architecture assures fast load transient response and the embedded voltage feed-forward provides nearly constant switching frequency operation. An embedded integrator control loop compensates the DC voltage error due to the output ripple. Pulse skipping technique increases efficiency at very light load. Moreover a minimum switching frequency of 33kHz is selectable to avoid audio noise issues. The PM6680 provides a selectable switching frequency, allowing three different values of switching frequencies for the two switching .

PM6680A : PM6680A is a dual step-down controller specifically designed to provide extremely high efficiency conversion, with losses current sensing technique. The constant on-time architecture assures fast load transient response and the embedded voltage feed-forward provides nearly constant switching frequency operation. An embedded integrator control loop compensates the DC voltage error due to the output ripple. Pulse skipping technique increases efficiency at very light load. Moreover a minimum switching frequency of 33kHz is selectable to avoid audio noise issues. The PM6680A provides a selectable switching frequency, allowing either 200kHz/300kHz, 300kHz/400Khz or 400kHz/500kHz operation of the .

PM6681A : ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ Applications ■ ■ ■ ■ Embedded computer system FPGA system power Industrial applications on 24V High performance and high density DC/DC modules Order codes Part number PM6681A PM6681ATR November 2006 Package VFQFPN-32 (5mm x 5mm) VFQFPN-32 (5mm x 5mm) Rev 1 Packaging Tube Tape and Reel 1/12 www.st.com 12 This is preliminary information on a new product foreseen to be developed. Details are subject to change without notice. www.DataSheet4U.com Contents PM6681A Contents 1 2 Simplified application schematic . 3 Pin settings ..

PM6685 : PM6685 is a dual step-down controller specifically designed to provide extremely high efficiency conversion, with lossless current sensing technique. The constant on-time architecture assures fast load transient response and the embedded voltage feed-forward provides nearly constant switching frequency operation. An embedded integrator control loop compensates the DC voltage error due to the output ripple. Pulse skipping technique increases efficiency at very light load. Moreover a minimum switching frequency of 25kHz is selectable to avoid audio noise issues. The PM6685 provides a selectable switching frequency, allowing either 200kHz/ 300kHz, 300kHz/400Khz or 400kHz/500kHz operation of the.

PM6686 : PM6686 Dual step-down controller with adjustable voltages, adjustable LDO and auxiliary charge pump controller for notebook Features ■ 5.5 V to 28 V input voltage range ■ Dual fixed OUT1 = 1.5 V/5 V and OUT2 = 1.05 V / 3.3 V outputs or adjustable OUT1 = 0.7 V to 5.5 V and OUT2 = 0.7 V to 2.5 V outputs, ± 1.5% accuracy over valley regulation ■ Low-side MOSFETs' RDS(on) current sensing and programmable current limit ■ Constant ON-time control ■ Frequency selectable ■ Soft-start internally fixed at 2 ms and soft-stop ■ Selectable pulse skipping at light loads ■ Selectable minimum frequency (33 kHz) in pulse skip mode ■ Independent Power Good and EN signals ■ Latched OVP and UVP ■ Charge pump .

PM6697 : The PM6697 is a high performance single phase controller designed to power Intel’s VR13 power rails, all required parameters are programmable through the dedicated pin strapping. The STVCOT™ control loop provides the fast load transient response minimizing and optimizing the output filter composition. The PM6697 device assures fast and indepe.

PM6697H : The PM6697H is a high performance single-phase controller designed to power Intel’s VR13 power rails. All required parameters are programmable through dedicated pin strapping. STVCOTTM control loop provides fast load transient response, minimizing and optimizing the output filter composition. The device assures fast and independent protection against load overcurrent, under/ overvoltage and feedback disconnections. The device is available in VFQFPN20 3x3mm package. DS11916 - Rev 3 - November 2021 For further information contact your local STMicroelectronics sales office. www.st.com PM6697H Typical application circuit and block diagram 1 Typical application circuit and block diagram 1.1.




Since 2006. D4U Semicon,
Electronic Components Datasheet Search Site. (Privacy Policy & Contact)