DatasheetsPDF.com

ATR0625 Datasheet PDF


Part Number ATR0625
Manufacturer ATMEL Corporation
Title GPS Baseband Processor SuperSense
Description The GPS baseband processor ATR0625 includes a 16-channel GPS correlator and is based on the ARM7TDMI® processor core. This processor has a high-pe...
Features
• 16-channel GPS Correlator
  – 8192 Search Bins with GPS Acquisition Accelerator
  – Accuracy: 2.5m CEP (Stand-Alone, S/A off)
  – Time to First Fix: 34s (Cold Start)
  – Acquisition Sensitivity:
  –142 dBm
  – Tracking Sensitivity:
  –158 dBm Utilizes the ARM7TDMI® ARM® Thumb® Processor Core
  – High-performance ...

File Size 365.05KB
Datasheet ATR0625 PDF File








Similar Ai Datasheet

ATR0600 : With the growing importance of mobile communication, location awareness is a key feature for more and more products and services. Due to its small size and minimal power consumption, the GPS front-end IC ATR0600 is an ideal solution for mobile applications and navigation systems. Figure 1. Block Diagram 96.76 MHz 1575.42 MHz LC-BP VS3 LNA RFIN Preliminary Ant BP NBP BPI NBPI REF VDIG Dig. IF at 4.35 MHz SIGH SAW RFNIN VGA amp BP-Filter SIGL SC 23.104 MHz OR AGCO VCO 1478.6 MHz 64 1 1 4 Power control GC PFD XTO P2 VS1 VS2 VS5 VS7 X XTO NXTO NX P1 23.104 MHz Rev. 4536F–GPS–10/03 DataSheet 4 U .com www.DataSheet4U.com Pin Configuration Figure 2. Pinning QFN28 n.c. RFNIN R.

ATR0601 : The ATR0601 is a single IF GPS front-end IC, designed to meet the requirements of mobile and automotive applications. Excellent RF performance combined with low noise figure enables high quality GPS solutions and it's very low power consumption fits perfectly to portable devices. Featuring a balanced XTO and a fully integrated balanced frequency synthesizer, only few external components are required. The ATR0601 offers a complete autonomous mode, utilizing the on chip AGC in closed loop operation, to set the gain of the IF VGA. Alternatively, in combination with the baseband processor ATR0621 the optimum gain of the IF VGA can be computed and set by software, using the digital SDI interface..

ATR0610 : The ATR0610 is a GPS low-noise amplifier IC designed for GPS applications. The part uses Atmel’s SiGe1 SiGe technology and is optimized for high linearity, low-noise figure, low BOM and low power consumption. The part features an integrated 50Ω output match and is prematched at the input. Due to internal supply blocking, the BOM is minimized. Together with the small footprint of 1.6 mm × 2.0 mm, the LNA allows for a very compact GPS receiver design. Figure 1-1. Block Diagram Cblock = 8.2 pF RF input PU Lseries = 4.7 nH PU Mode PD Mode ATR0610 RF output 2.7-V GPS Low-noise Amplifier ATR0610 Cshunt = 1.2 pF GND VCC 4573H–GPS.

ATR0620 : The GPS baseband processor ATR0620 includes a 16-channel GPS correlator and is based on the ARM7TDMI processor core. This processor has a high-performance 32-bit RISC architecture with a high-density 16-bit instruction set and very low power consumption. In addition, a large number of internally banked registers result in very fast exception handling, making the device ideal for real-time control applications. The ATR0620 has a direct connection to off-chip memory, including flash, through the External Bus Interface (EBI). The ATR0620 is manufactured using Atmel’s high-density CMOS technology. By combining the ARM7TDMI microcontroller core with on-chip SRAM, 16-channel GPS correlator and a w.

ATR0621 : The GPS baseband processor ATR0621 includes a 16-channel GPS correlator and is based on the ARM7TDMI® processor core. This processor has a high-performance 32-bit RISC architecture and very low power consumption. In addition, a large number of internally banked registers result in very fast exception handling, making the device ideal for real-time control applications. The ATR0621 has a USB device port. This port is compliant with the Universal Serial Bus (USB) V2.0 fullspeed device specification. The ATR0621 has a direct connection to off-chip memory, including Flash, through the External Bus Interface (EBI). The ATR0621 includes full GPS firmware, licensed from u-blox AG, which performs th.

ATR0621P1 : The GPS baseband processor ATR0621P1 includes a 16-channel GPS correlator and is based on the ARM7TDMI processor core. This processor has a high-performance 32-bit RISC architecture and very low power consumption. In addition, a large number of internally banked registers result in very fast exception handling, making the device ideal for real-time control applications. The ATR0621P1 has two USART and an USB device port. This port is compliant with the Universal Serial Bus (USB) V2.0 full-speed device specification. The ATR0621P1 has a direct connection to off-chip memory, including Flash, through the External Bus Interface (EBI). The ATR0621P1 includes full GPS firmware, licensed from u-blo.

ATR0630 : The ATR0630 is a low-power, single-chip GPS receiver, especially designed to meet the requirements of mobile applications. It is based on Atmel’s ANTARIS™4 technology and integrates an RF front-end, filtering, and a baseband processor in a single, tiny 7 mm × 10 mm 96 pin BGA package. Providing excellent RF performance with low noise figure and low power consumption. Due to the fully integrated design, just an RF SAW filter, a GPS XTAL (no TCXO) and blocking capacitors are required to realize a stand-alone GPS functionality. The ATR0630 includes a complete GPS firmware, licensed from u-blox AG, which performs the GPS operation, including tracking, acquisition, navigation and position data ou.

ATR0635 : The ATR0635 is a low-power, single-chip GPS receiver, especially designed to meet the requirements of mobile applications. It is based on Atmel’s ANTARIS™4 technology and integrates an RF front-end, filtering, and a baseband processor in a single, tiny 7 mm × 10 mm 96 pin BGA package. Providing excellent RF performance with low noise figure and low power consumption. Due to the fully integrated design, just an RF SAW filter, a GPS TCXO and blocking capacitors are required to realize a stand-alone GPS functionality. The ATR0635 includes a complete GPS firmware, licensed from u-blox AG, which performs the GPS operation, including tracking, acquisition, navigation and position data output. For .

ATR0663 : The ATR0663 is based on an ARM926EJ-S processor with an integrated high-performance GPS engine and a rich peripheral set to provide a system level solution that minimizes space, power, and number of additional components required for the implementation of GPS-enabled products. The device is supplied in a 15 mm × 15 mm 324-pin TFBGA package. The GPS firmware is included in the BSP (Board Support Package) for Windows CE®. The ATR0663 embeds an LCD controller strengthened by a 2D graphics accelerator, AC97 audio controller, a 20-channel DMA controller, and an image sensor interface. It also integrates several standard peripherals such as USB 2.0 full speed double host and device, USART, SPI, TW.

ATR0786 : The ATR0786 is a high linearity active mixer which is manufactured using Atmel´s advanced Silicon Germanium technology for the use in a variety of high performance requiring RF systems such as digital communications. This mixer features a frequency range of 1800 MHz to 2100 MHz. It operates from a single 5 V supply and provides 16 dB of conversion gain while requiring only 0 dBm input to the integrated LO driver. An IF and an LO amplifier is also included. The ATR0786 incorporates internal matching on each RF, IF and LO port to enhance ease of use and to reduce the external components required. The RF and LO inputs can be driven differentially or single ended. Figure 1. Block Diagram IF_IN+.

ATR0787 : The ATR0787 is a high linearity active mixer which is manufactured using Atmel´s advanced Silicon Germanium technology for the use in a variety of high performance requiring RF systems such as digital communications. This mixer features a frequency range of 2100 MHz to 2500 MHz. It operates from a single 5 V supply and provides 17 dB of conversion gain while requiring only 0 dBm input to the integrated LO driver. An IF and an LO amplifier is also included. The ATR0787 incorporates internal matching on each RF, IF and LO port to enhance ease of use and to reduce the external components required. The RF and LO inputs can be driven differentially or single ended. Figure 1. Block Diagram IF_IN+.

ATR0797 : The ATR0797 is a multi-purpose demodulator RFIC. The silicon monolithic integrated circuit is designed with Atmel’s advanced SiGe technology. This demodulator is capable of both quadrature demodulation or direct IF output. Features include switchable gain control on a frequency range from 65 MHz to 300 MHz. The device performs a very low amplitude as well as phase error and allows high input P1dB. The ATR0797 targets a variety of system applications for communications including 3G wireless. Figure 1. Block Diagram GC1 5 GC2 4 2 1 BBIP BBIN IFP IFN 8 9 ϕ 16 15 13 12 BBQP BBQN LOP LON Rev. 4665D–SIGE–08/04 DataSheet 4 U .com www.DataSheet4U.com Pin Configuration Figure 2. Pinning BB.

ATR0807 : The ATR0807 is a laser diode driver for the operation of two different grounded laser diodes for DVD-RW/DVD+RW (650 nm) and CD-RW (780 nm). It includes three channels for three different optical power levels which are controlled by a separate IC. The read channel generates a continuous output level, whereas the channels 2 and 3 are provided as write channels with very fast switching speeds. Write current pulses are enabled when a low signal is applied to the NE pins. All channels are summed together and switched to one of the two IOUTA or IOUTB outputs by the select input SELA. Each write channel (channel 2 and 3) can contribute up to 350 mA to the total output current, up to 500 mA. The rea.

ATR0808 : The ATR0808 is a laser diode driver for the operation of two different grounded laser diodes for DVD-RW/DVD+RW (650 nm) and CD-RW (780 nm). It includes three channels for three different optical power levels which are controlled by a separate IC. The read channel generates a continuous output level, whereas the channels 2 and 3 are provided as write channels with very fast switching speeds. Write current pulses are enabled when a low signal is applied to the NE pins. All channels are summed together and switched to one of the two IOUTA or IOUTB outputs by the select input SELA. Each write channel (channel 2 and 3) can contribute up to 350 mA to the total output current, up to 500 mA. The rea.

ATR0809 : ATR0809 is a laser diode driver for the operation of two different grounded laser diodes for DVD-RW/+RW (650 nm) and CD-RW (780 nm). It includes four channels for four different optical power levels. All channels (channel 1 = read channel, channel 2, 3, 4 = write channels) can be controlled by fast switches. The current pulses are enabled when a low signal is applied to the NE pins. All channels are summed together and switched to one of the two outputs IOUTA or IOUTB by the select input SELA. Each write channel (channel 2, 3 and 4) can contribute up to 350 mA to the total output current of up to 500 mA. The read channel can contribute up to 150 mA. Total gains of 100 (read channel), 250 (ch.

ATR0839 : The ATR0839 is a laser diode driver designed to operate two different grounded laser diodes for DVD-RW/DVD+RW (650 nm) and CD-RW (780 nm). The device includes four channels for four different optical power levels. The write channels (channels 2 to 4) can be controlled by fast LVDS (Low Voltage Differential Signaling). The read channel generates a continuous output current, whereas channels 2 to 4 are designed as write channels with very fast switching speed. All channels are summed together and routed to one of the two outputs, IOUTA or IOUTB, controlled by the select input, SELA. Each write channel (channel 2 to 4) can contribute up to 350 mA to the total output current of up to 600 mA. The.




Since 2006. D4U Semicon,
Electronic Components Datasheet Search Site. (Privacy Policy & Contact)