DatasheetsPDF.com

AT1452

Part Number AT1452
Manufacturer Aimtron Technology
Title Photoflash Capacitor Charger
Description The AT1452 is a charger control IC for Photoflash capacitor with soft start function, adjustable maximum duty cycle, auto-refresh and autodischarg...
Features
• 2.5 to 5.5V supply voltage operating range.
• Low current consumption: 1mA in operation,
• 50 kHz or 100kHz operation frequency .
• Built-in maximum duty control.
• Push-pull output.
• Built-in soft start circuit.
• Built-in auto-discharge function.
• Built-in auto-refresh function. General Descr...

File Size 630.78KB
Datasheet AT1452 PDF File







Similar Datasheet

AT1450 : The AT1450 is a single-channel PWM control IC for Photoflash capacitor charger with soft start function and auto-discharge circuit. Adjustable soft start is programmed with an external capacitor on SS pin. Applications •Digital Still Cameras flash unit Block Diagram Aimtron reserves the right without notice to change this circuitry and specifications. 2F, No.10, Prosperity RD. II, Science-Based Industrial Park, Hsinchu 300,Taiwan, R.O.C. Tel: 886-3-563-0878 WWW: http://www.aimtron.com.tw Fax: 886-3-563-0879 Email: service@aimtron.com.tw 1 AT1450 Preliminary Product Information Photoflash Capacitor Charger for DSC Pin Configuration Ordering Information Part number AT1450S AT1450S_Green.

AT1453 : The AT1453 is a charger control IC for Photoflash capacitor with soft start function, adjustable maximum duty cycle and auto-discharge (soft start capacitor) circuit. Adjustable soft start is programmed with an external capacitor on SS pin. The control technique allows for the use of external resistor to change the switching duty and use of transformer to control the input current. A logic high on the CHARGE pin initiates charging, while the READY pin signals that the capacitor is fully charged. It is ideal for DSC flash unit. * Protected by U.S. Patent #6,724,989 Applications •Digital Still Cameras flash unit Block Diagram VCC READY GND Reference Output Control Block OUT SS DUTY Vref.

AT1454 : The AT1454 series is a charger IC for Photoflash capacitor with soft-start function, an IGBT driver for igniting flash tube, adjustable output voltage and adjustable switch on-time to perform energy transition on each charge cycle. The output voltage can be adjusted by simply changing the turn ratio of transformer. AT1454B is sensed by voltage divider connecting to the anode of the rectifying diode. The voltage sensing path is cut off when charging function to be completed to maintain minimum output voltage decay. The device allows user to control automatic refresh rate on Charge pin. While the Ready pin signals that the capacitor is fully charged. AT1454/AT1454A/AT1454B MSOP-10 package. is .

AT1454A : The AT1454 series is a charger IC for Photoflash capacitor with soft-start function, an IGBT driver for igniting flash tube, adjustable output voltage and adjustable switch on-time to perform energy transition on each charge cycle. The output voltage can be adjusted by simply changing the turn ratio of transformer. AT1454B is sensed by voltage divider connecting to the anode of the rectifying diode. The voltage sensing path is cut off when charging function to be completed to maintain minimum output voltage decay. The device allows user to control automatic refresh rate on Charge pin. While the Ready pin signals that the capacitor is fully charged. AT1454/AT1454A/AT1454B MSOP-10 package. is .

AT1454AB : The AT1454 series is a charger IC for Photoflash capacitor with soft-start function, an IGBT driver for igniting flash tube, adjustable output voltage and adjustable switch on-time to perform energy transition on each charge cycle. The output voltage can be adjusted by simply changing the turn ratio of transformer. AT1454B is sensed by voltage divider connecting to the anode of the rectifying diode. The voltage sensing path is cut off when charging function to be completed to maintain minimum output voltage decay. The device allows user to control automatic refresh rate on Charge pin. While the Ready pin signals that the capacitor is fully charged. AT1454/AT1454A/AT1454B MSOP-10 package. is .

AT1457 : The AT1457 series Lithium-Ion (Li-Ion) and Lithium-Polymer (Li-Pol) linear charge ICs are designed for cost-sensitive and compact portable electronics. They combine high-accuracy current and voltage regulation, battery conditioning, temperature monitoring, charge termination, and charge-status indication in a single 8-pin IC. MSOP package options are offered to fit a wide range of end applications. The AT1457 continuously measures battery temperature using an external thermistor. For safety, the AT1457 inhibits charge until the battery temperature is within user-defined thresholds. The AT1457 then charges the battery in three phases: conditioning, constant current, and constant voltage. If t.




Since 2006. D4U Semicon,
Electronic Components Datasheet Search Site. (Privacy Policy & Contact)