DatasheetsPDF.com

LN66


Part Number LN66
Manufacturer Panasonic Semiconductor
Title GaAs Infrared Light Emitting Diode
Description Infrared Light Emitting Diodes LN66 GaAs Infrared Light Emitting Diode Unit : mm For optical control systems Features High-power output, high-ef...
Features High-power output, high-efficiency : PO = 8 mW (typ.) Emitted light spectrum suited for silicon photodetectors Good radiant power output linearity with respect to input current Wide directivity : θ = 25 deg. (typ.) Transparent epoxy resin package 13.5±1.0 11.5±1.0 3.6±0.3 1.0 7.65±0.2 ø5.0±0.2 Not ...

File Size 47.61KB
Datasheet LN66 PDF File








Similar Ai Datasheet

LN6011 : .

LN60A : The LN60A is a single lithium battery charge indicator chip, using CMOS process to achieve, small size and ease of installation of portable products. The LN60A with built-in comparator and feedback loop, to materialize the detection of the four voltage point. By the internal trimming technology, you can ensure that the voltage detection accuracy of ± 1 %. The output using OPENDRAIN structure, ease of customer use IO ports or LED indication. ■ Features  Ultra-low current consumption:10uA  Built - in 4-way comparator, the detection of the four voltage point  The internal comparator with reasonable hysteresis, is easy to charge and discharge instructions.  High-precision detection voltage±.

LN60N04 : 60A/40V N VDSS 40V l l l l TO-252 l TO-252 LN60N04 ID RDS(ON)(mΩ)TYP 60A 7.3 @ VGS=10V,ID=20A LN60N04 -55°C to +150°C TO-252 2500 25 100 Pc=25 Rev.1.0 May. 24.2016 VDS VGS ID ID IDM PD Tj EAS 1 TA=25 40 ±20 60 42 200 65 -55 150 400 V V A A A W mJ www.natlinear.com LN60N04 (TA=25 unless otherwise noted) BVDSS IDSS IGSS VGS=0V, ID=250µA VDS=40V, VGS=0V VDS=0V, VGS=±20V 40 45 V 1 µA ±100 nA VGS(th) RDS(ON) RDS(ON) RDS(ON) gfs VDS=VGS, ID=250µA VGS=4.5V, ID=3A VGS=10V, ID=3A VGS=10V, ID=20A VGS=10V, ID=20A 1.2 1.6 2.5 11.5 8 7.3 13 15 V mΩ mΩ mΩ S CISS COSS CRSS VDS=20V ,VGS=0V f=1.0MHz 1800 280 190 pF tD(ON) tr tD(OFF) tf Qg Qgs Qgd VDD=20V,ID=2A,RL=1Ω VGS=10V,RG.

LN6101 : .

LN6102 : LN6102 ■ LN6102 , 5 LED ,, ±1%, ■  ■   ±1%   ■  SOP8 ■ VDD 3K 1K 1K 18K 1K 1K * 1 FB GND OUT1 10K LED5 RED LED4 GREEN VIN OUT4 10uF OUT3 LED3 GREEN LED2 GREEN LED1 GREEN OUT2 : 24V NO.: NL-QR-730-16 VER: 13A09 1 www.natlinear.com ■ LN6102 ①②③④⑤⑥ ① ②③④ ⑤ ⑥ ■ L 120 M R L 1.20 SOP8 * 1 FB VIN GND OUT4 OUT1 OUT3 OUT2 NC 1 2 3 4 5 6 7 8.

LN6103 : .

LN61A : The LN61A series is a series of high-programmable precision voltage detectors developed using CMOS process. The detection voltage is fixed internally with an accuracy of ±2.0%. Two output forms, Nch open-drain and CMOS output, are available. Ultra-low current consumption and miniature package lineup can meet demand from the portable device applications. ■ Features ■ Applications  Battery checkers  Power failure detectors  Power monitor for portable equipments such as pagers, calculators, electronic notebooks and remote controllers.  Constant voltage power monitor for cameras, video equipments and communication devices.  Power monitor for microcomputers and reset for CPUs.  High-preci.

LN61C : The LN61C series is a series of high-precision voltage detectors developed using CMOS process. The detection voltage is fixed internally with an accuracy of ±2.0%. Two output forms, Nch open-drain and CMOS output, are available. Ultra-low current consumption and miniature package lineup can meet demand from the portable device applications. Features l Ultra-low current consumption 2.0 μA typ. (Vin=1.5V) l High-precision detection voltage ±2.0 % l Operating voltage range 0.7 V to 8.0 V l Detection voltage 1.0V to 6.0 V (0.1 V step) l Output form Nch open-drain output (Active Low) or CMOS output (Active Low) Ordering Information LN61C Applications l Battery checkers l Power failure detectors .

LN61C : .

LN61F : The LN61F is a micro-power voltage detector supervising the power supply voltage level for microprocessors or digital systems, which is extremely accurate with minimal temperature drift. It provides internally fixed threshold levels with 0.1V per step ranging from 1.5V to 5V, which covers most digital applications. It features low supply current.Both CMOS and N-channel open drain output configurations are available.Since the delay circuit is built-in, peripherals are unnecessary and high density mounting is possible. ■ Features  Highly Accurate ±2%  Low Power Consumption lower than 1.5μA  Detect Voltage Range 1.5V ~ 5.0V in 0.1V increments  Operating Voltage Range 0.7V ~ 7.0V  Detect Vo.

LN6206 : The LN6206 series are precise, low power consumption, high voltage; positive voltage regulators manufactured using CMOS and laser trimming technologies. The series provides large currents with a significantly small dropout voltage. The LN6206 consists of a current limiter circuit, a driver transistor, a precision reference voltage and an error correction circuit. The series is compatible with low ESR ceramic capacitors. The current limiter's feedback circuit also operates as a short protect for the output current limiter and the output pin. Output voltage can be set internally by laser trimming technologies. It is selectable in 100mV increments within a range of 1.2V to 5.0V. SOT-89-3, SOT-2.

LN6210 : The LN6210 series are highly precise, low noise, positive voltage LDO regulators manufactured using CMOS processes. The series achieves high ripple rejection and low dropout and consists of a standard voltage source, an error correction, current limiter and a phase compensation circuit plus a driver transistor. Output voltage is selectable in 100mV increments within a range of 1.0V ~ 5.0V. The series is also compatible with low ESR ceramic capacitors which give added output stability. This stability can be maintained even during load fluctuations due to the excellent transient response of the series. The CE function enables the output to be turned off, resulting in greatly reduced power cons.

LN6214 :  Small packages: SOT-89-3,SOT-26 The LN6214 series are highly precise, low power consumption, positive voltage regulators manufactured using CMOS and laser trimming technologies. The series provides large currents with a significantly small dropout voltage. The LN6214 consists of a current limiter circuit, a driver transistor, a precision reference voltage and an error amplifier. Output voltage is selectable in 0.1V steps between1.5V~6.0V. ■ Features ■ Applications  DVD,CD-ROM,HDD drive equipment  Wireless Communication equipment (Mobile & Cordless phone, etc.)  Network equipment (Wireless LAN etc.)  Desktop computers, Note book computer, PDAs  Portable AV equipment  Reference volt.

LN6218 : The LN6218 series are precise, low power consumption, high voltage; positive voltage regulators manufactured using CMOS and laser trimming technologies. The series provides large currents with a significantly small dropout voltage. The LN6218 consists of a current limiter circuit, a driver transistor, a precision reference voltage and an error correction circuit. The series is compatible with low ESR ceramic capacitors. The current limiter's feedback circuit also operates as a short protect for the output current limiter and the output pin. Output voltage can be set internally by laser trimming technologies. It is selectable in 100mV increments within a range of 1.2V to 5.0V. SOT-89-3, SOT-2.

LN62FP : CMOS ■ LN62FP CMOS 、、。 300mA, 12V。 1.5V~5.0V, 。 CMOS , 。, 。 ■   ■ ■        ■  SOT-89-3L  SOT23-3 LN62FP○1 ○2 ○3 ○4 ○5 ○6 LN62FP 2µA ±2% <±100ppm/℃ 12V 300mA() SOT-89 SOT23-3 .

LN6401 : The LN6401 series are highly accurate, Dual, low noise, CMOS LDO voltage regulators. Performance features of the series include low output noise, high ripple rejection ratio, low dropout and very fast turn-on times. The LN6401 includes a reference voltage source, error amplifiers, driver transistors, current limiters and phase compensators internally. TheLN6401’s current limiter’s foldback circuit also operates as a short protect for the output current limiter. The output voltage for each regulator is set independently by laser trimming. Voltages are selectable in 50mV steps within a range of 1.3V to 6.0V.The EN function allows the output of each regulator to be turned off independently, res.

LN6411 : The LN6411 series are highly accurate, Dual, CMOS LDO voltage regulators. The LN6411 includes a reference voltage source, error amplifiers, driver transistors, current limiters and phase compensators internally. TheLN6411’s current limiter’s foldback circuit also operates as a short protect for the output current limiter. The output voltage for each regulator is set independently by laser trimming. Voltages are selectable in 50mV steps within a range of 1.3V to 5.0V. The EN function allows the output of each regulator to be turned off independently, resulting in greatly reduced power consumption. The LN6411 series is available in the SOT-25. ■ Features  Output Voltage Range : 1.3V to 6.0V (.




Since 2006. D4U Semicon,
Electronic Components Datasheet Search Site. (Privacy Policy & Contact)