DatasheetsPDF.com

SM626


Part Number SM626
Manufacturer Linfinity
Title (SM62x) SWITCHING REGULATOR POWER OUTPUT STAGES
Description The SM625/626/627 series of Power Output Stages are especially designed to be driven with standard PWM integrated circuits to form an efficient sw...
Features
• Equivalent to the Unitrode PIC 625, 626, 627
• 15A current capability
• Designed and characterized for switching regulator applications such as Buck, Boost, and Buck-Boost type
• Cost saving design reduces size, improves efficiency, reduces noise and RFI
• High operating frequency (to 100KHz) re...

File Size 81.96KB
Datasheet SM626 PDF File








Similar Ai Datasheet

SM62 : SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR SM6.8 THRU SM200CA FEATURES • • • • • Breakdown Voltage Peak Pulse Power 6.8 to 200 Volts 400 Watts • • • Plastic package has Underwriters Laboratory Flammability Classification 94V-O For surface mounted applications Glass passivated junction Low inductance surge resistance Fast response time: typical less than 1.0ps from 0 volts to V(BR) for unidirectional AND 5.0ns for bidirectional types 400W peak pulse capability with a 10/1000μs waveform, repetition rate (duty cycle): 0.01% For devices with V(BR) ≥10V, ID are typically less than 1.0μA High temperature soldering guaranteed: 250℃/10 seconds at terminals DO-213AB Dimensions in inches and (m.

SM62 : SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR SM6.8 THRU SM200CA Breakdown Voltage Peak Pulse Power 6.8 to 200 Volts 400 Watts FEATURES • Plastic package has Underwriters Laboratory Flammability Classification 94V-O • For surface mounted applications • Glass passivated junction • Low inductance surge resistance • Fast response time: typical less than 1.0ps from 0 volts to V(BR) for unidirectional AND 5.0ns for bidirectional types • 400W peak pulse capability with a 10/1000μs waveform, repetition rate (duty cycle): 0.01% • For devices with V(BR) ≥10V, ID are typically less than 1.0μA • High temperature soldering guaranteed: 250℃/10 seconds at terminals DO-213AB Dimensions in inches and (mil.

SM6201 : The SM6201 series are highly precise, low power consumption, positive voltage regulators manufactured using CMOS and laser trimming technologies. The series provide large currents with a significantly small dropout voltage. The SM6201 consists of a current limiter circuit, a driver transistor, a precision reference voltage and an error amplifier. Output voltage is selectable in 0.1V steps between 1.3~6.0V. SOT-89 Features * Max. Operating Voltage: 10V * Highly Accruate: Output Voltage ± 2% REF. A B C D E F Millimeter Min. Max. 4.4 4.6 4.05 4.25 1.50 1.70 1.30 1.50 2.40 2.60 0.89 1.20 REF. G H I J K L M Millimeter Min. Max. 3.00 REF. 1.50 REF. 0.40 0.52 1.40 1.60 0.35 0.41 5° TYP. 0.70 REF..

SM620D : Elektronische Bauelemente SM620D~SM6100D Voltage 20 ~100V 6.0Amp. Schottky Barrier Rectifiers RoHS Compliant Product A suffix of “-C” specifies halogen & lead-free FEATURES  Low forward voltage drop  High current capability  High reliability  High surge current capability  Epitaxial construction MECHANICAL DATA  Case: Molded plastic  Epoxy: UL94V-0 rate flame retardant  Lead: Lead solderable per MIL-STD-202 method 208  Polarity: As Marked  Mounting position: Any  Weight: 0.7 grams PACKAGE INFORMATION Package MPQ TO-252 2.5K Leader Size 13 inch TO-252 (D-Pack) A BC D GE K HF MJ N O P REF. Millimeter Min. Max. REF. Millimeter Min. Max. A 6.35 6.90 J 2.30 REF. B.

SM6227 : RoHS Compliance Status Package / Termination Type Standard Series RoHS Compliant Lead-Free Termination Composition Surface Mount - General Purpose and Precision W.

SM6231-BCE-S-004-000 : The SM6231 is a digital, ultra-low pressure MEMS sensor offering state-of-the-art pressure transducer technology and CMOS mixed signal processing technology to produce a digital, fully conditioned, multi-order pressure and temperature compensated sensor in JEDEC standard SOIC-16 package with a dual vertical porting option. It is available in a gauge pressure configuration. Combining the pressure sensor with a signal-conditioning ASIC in a single package simplifies the use of advanced silicon micro-machined pressure sensors. The pressure sensor can be mounted directly on a standard printed circuit board and a high level, calibrated pressure signal can be acquired from the digital interface..

SM625 : The SM625/626/627 series of Power Output Stages are especially designed to be driven with standard PWM integrated circuits to form an efficient switching power supply. The SM625, SM626 and SM627 are optimized for non-isolated Buck and Buck-Boost application. The hybrid circuit construction utilizes thick film resistors on a beryllia substrate for maximum thermal conductivity and resultant low thermal impedance. All of the active elements in the hybrid are fully passivated. FEATURES • Equivalent to the Unitrode PIC 625, 626, 627 • 15A current capability • Designed and characterized for switching regulator applications such as Buck, Boost, and Buck-Boost type • Cost saving design reduces size.

SM6250 : The Silicon Microstructures' SM6250 Series of MEMS pressure sensors combines state-of-the-art pressure sensor technology with CMOS mixed-signal processing technology in a dual ported SOIC-16 package. Combining the pressure sensor with a signal conditioning ASIC in a single package simplifies the use of advanced silicon micromachined pressure sensors. The pressure sensor can be mounted directly to a standard printed circuit board (PCB). Pressure is measured from the backside, while additional protection to the electronic circuitry is provided by protective gel on the topside. The SM6250 is shipped uncalibrated and uncompensated with only a functional test. The SM6250 Series pressure sensors.

SM627 : The SM625/626/627 series of Power Output Stages are especially designed to be driven with standard PWM integrated circuits to form an efficient switching power supply. The SM625, SM626 and SM627 are optimized for non-isolated Buck and Buck-Boost application. The hybrid circuit construction utilizes thick film resistors on a beryllia substrate for maximum thermal conductivity and resultant low thermal impedance. All of the active elements in the hybrid are fully passivated. FEATURES • Equivalent to the Unitrode PIC 625, 626, 627 • 15A current capability • Designed and characterized for switching regulator applications such as Buck, Boost, and Buck-Boost type • Cost saving design reduces size.

SM6295 : The SM6295-BCM-S-040-000 is an amplified analog, low pressure MEMS sensor offering state-of-the-art pressure transducer technology and CMOS mixed signal processing technology to produce an analog, fully conditioned, pressure and temperature compensated sensor in a JEDEC standard SOIC-16 package with dual vertical porting. It is available in a gage pressure configuration. Combining the pressure sensor with a signal-conditioning ASIC in a single package simplifies the use of advanced silicon micro-machined pressure sensors. The pressure sensor can be mounted directly on a standard printed circuit board and a high level, calibrated pressure signal can be acquired from the analog output. This .

SM6295-BCM-S-040-000 : The SM6295-BCM-S-040-000 is an amplified analog, low pressure MEMS sensor offering state-of-the-art pressure transducer technology and CMOS mixed signal processing technology to produce an analog, fully conditioned, pressure and temperature compensated sensor in a JEDEC standard SOIC-16 package with dual vertical porting. It is available in a gage pressure configuration. Combining the pressure sensor with a signal-conditioning ASIC in a single package simplifies the use of advanced silicon micro-machined pressure sensors. The pressure sensor can be mounted directly on a standard printed circuit board and a high level, calibrated pressure signal can be acquired from the analog output. This .

SM62A : SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR SM6.8 THRU SM200CA FEATURES • • • • • Breakdown Voltage Peak Pulse Power 6.8 to 200 Volts 400 Watts • • • Plastic package has Underwriters Laboratory Flammability Classification 94V-O For surface mounted applications Glass passivated junction Low inductance surge resistance Fast response time: typical less than 1.0ps from 0 volts to V(BR) for unidirectional AND 5.0ns for bidirectional types 400W peak pulse capability with a 10/1000μs waveform, repetition rate (duty cycle): 0.01% For devices with V(BR) ≥10V, ID are typically less than 1.0μA High temperature soldering guaranteed: 250℃/10 seconds at terminals DO-213AB Dimensions in inches and (m.

SM62A : SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR SM6.8 THRU SM200CA Breakdown Voltage Peak Pulse Power 6.8 to 200 Volts 400 Watts FEATURES • Plastic package has Underwriters Laboratory Flammability Classification 94V-O • For surface mounted applications • Glass passivated junction • Low inductance surge resistance • Fast response time: typical less than 1.0ps from 0 volts to V(BR) for unidirectional AND 5.0ns for bidirectional types • 400W peak pulse capability with a 10/1000μs waveform, repetition rate (duty cycle): 0.01% • For devices with V(BR) ≥10V, ID are typically less than 1.0μA • High temperature soldering guaranteed: 250℃/10 seconds at terminals DO-213AB Dimensions in inches and (mil.

SM62FP : The SM62FP series is a group of positive voltage output, three-pin regulators, that provide a high current even when the input/output voltage differential is small. Low power consumption and high accuracy is achieved through CMOS and laser trimming technologies. The SM62FP consists of a high-precision voltage reference, an error amplification circuit, and a current limited output driver. Transient response to load variations have improved in comparison to the existing series. SOT-89 Features * * REF. A B C D E F Small Input-Output Differential:IOUT=100mA@VOUT=5V with a 0.12V differential Highly Accruate: Output Voltage ± 2% * Low Power Consumption: Typ. 2uA@VOUT=5V * Output Voltage Rang.




Since 2006. D4U Semicon,
Electronic Components Datasheet Search Site. (Privacy Policy & Contact)