DatasheetsPDF.com

LH1502BB Datasheet PDF


Part Number LH1502BB
Manufacturer Vishay Siliconix
Title Dual 1 Form A/B/ C Solid State Relay
Description The LH1502 relays contain normally open and normally closed switches that can be used independently as a 1 form A and 1 form B relay, or when used...
Features
• Current limit protection
• Isolation test voltage 3750 VRMS
• Typical RON 20 Ω
• Load voltage 350 V
• Load current 150 mA
• High surge capability
• Clean bounce free switching
• Low power consumption
• SMD lead available on tape and reel
• Material categorization: for definitions of compliance ple...

File Size 181.16KB
Datasheet LH1502BB PDF File








Similar Ai Datasheet

LH1500 : Siemens Solid State Relays (SSRs) are miniature, optically-coupled relays with high-voltage MOSFET outputs. The relays are capable of switching ac or dc loads from as little as nanovolts to hundreds of volts. Likewise, the relays can switch currents in the range of nanoamps to hundreds of milliamps. The MOSFET switches are ideal for small signal switching and are primarily suited for dc or audio frequency applications. Siemens offers integrated current limiting on many of its relays. If load current through the relay exceeds the rated value, the relay clamps the current at a predefined value. If the excessive load current persists, the limiting circuit has a foldback feature to minimize relay.

LH1500AAB : The LH1500 is robust, ideal for telecom and ground fault applications. It is an SPST normally open switch (1 Form A) that replaces electromechanical relays in many applications. It is constructed using a GaAlAs LED for actuation control and MOSFETs for the switch output. APPLICATIONS • General telecom switching • Security equipment • Instrumentation • Industrial controls AGENCY APPROVALS • UL 1577 • cUL • DIN EN 60747-5-5 (VDE 0884-5) • FIMKO ORDERING INFORMATION L H 1 5 0 PART NUMBER PACKAGE SMD-6, tube SMD-6, tape and reel DIP-6, tube 0 # # # ELECTR. PACKAGE VARIATION CONFIG. T R DIP-6 TAPE AND REEL 7.62 mm UL, cUL, FIMKO, VDE LH1500AAB LH1500AABTR LH1500AT SMD-6 0.1.

LH1500AABTR : The LH1500 is robust, ideal for telecom and ground fault applications. It is an SPST normally open switch (1 Form A) that replaces electromechanical relays in many applications. It is constructed using a GaAlAs LED for actuation control and MOSFETs for the switch output. APPLICATIONS • General telecom switching • Security equipment • Instrumentation • Industrial controls AGENCY APPROVALS • UL 1577 • cUL • DIN EN 60747-5-5 (VDE 0884-5) • FIMKO ORDERING INFORMATION L H 1 5 0 PART NUMBER PACKAGE SMD-6, tube SMD-6, tape and reel DIP-6, tube 0 # # # ELECTR. PACKAGE VARIATION CONFIG. T R DIP-6 TAPE AND REEL 7.62 mm UL, cUL, FIMKO, VDE LH1500AAB LH1500AABTR LH1500AT SMD-6 0.1.

LH1500AT : The LH1500 is robust, ideal for telecom and ground fault applications. It is an SPST normally open switch (1 Form A) that replaces electromechanical relays in many applications. It is constructed using a GaAlAs LED for actuation control and MOSFETs for the switch output. APPLICATIONS • General telecom switching • Security equipment • Instrumentation • Industrial controls AGENCY APPROVALS • UL 1577 • cUL • DIN EN 60747-5-5 (VDE 0884-5) • FIMKO ORDERING INFORMATION L H 1 5 0 PART NUMBER PACKAGE SMD-6, tube SMD-6, tape and reel DIP-6, tube 0 # # # ELECTR. PACKAGE VARIATION CONFIG. T R DIP-6 TAPE AND REEL 7.62 mm UL, cUL, FIMKO, VDE LH1500AAB LH1500AABTR LH1500AT SMD-6 0.1.

LH1501 : LH1501, LH1511, LH1536 1 Form B Absolute Maximum Ratings TA=25°C Stresses in excess of the Absolute Maximum Ratings can cause permanent damage to the device. These are absolute stress ratings only. Functional operation of the Parameter Ambient Operating Temperature Range Storage Temperature Range www.DataSheet4U.com Pin Soldering Temperature Input/Output Isolation Test Voltage LED Continuous Forward Current LED Reverse Voltage dc or Peak ac Load Voltage Continuous dc Load Current Bidirectional Operation Unidirectional Operation Peak Load Current Output Power Dissipation (continuous) Symbol TA Tstg TS VISO IF VR VL IL Test Conditions — — t=10 s max Vrms t=1 s IISO=10 µA max — IR ≤ 10 µA IL ≤ .

LH1501-2R : H Series 50 Watt AC-DC Converters Input voltage range 85...255 V AC 1, 2 or 3 isolated outputs up to 48 V DC 4 kV AC I/O electric strength test voltage LGA • Rugged electrical and mechanical design • Output 1 regulated, outputs 2 and 3 tracking • Operating ambient temperature range –10...50 °C with convection cooling Selection chart Output 1 Output 2 Output 3 Rated power Uo nom [V DC] 5.1 12 15 24 48 12 15 5.1 5.1 Io nom [A] 11 6 4.5 3 1.5 2 1.7 5 5 Uo nom [V DC] 12 15 12 15 Io nom [A] 2 1.7 0.7 0.6 Uo nom [V DC] 12 15 Io nom [A] 0.7 0.6 Po tot [W] 56 72 67 72 72 48 51 42 43 Type Input voltage 85...255 V AC LH 1001-2R LH 1301-2R LH 1501-2R LH 1601-2R LH 1901-2R LH 2320-2 LH 2540-2.

LH1501BAB : The LH1501 relays are SPST normally closed switches (1 form B) that can replace electromechanical relays in many applications. The relays are constructed as a multi-chip hybrid device. Actuation control is via an infrared LED. The output switch is a combination of a photodiode array with MOSFET switches and control circuity. The relays can be configured for AC/DC or DC only operation. ORDERING INFORMATION LH1 5 0 1B FEATURES • Isolation test voltage 3750 VRMS • Typical RON 20  • Load voltage 350 V • Clean bounce free switching • Low power consumption • SMD lead available on tape and reel • Compliant to RoHS Directive 2002/95/EC and in accordance to WEEE 2002/96/EC APPLICATIONS • General te.

LH1501BABTR : The LH1501 relays are SPST normally closed switches (1 form B) that can replace electromechanical relays in many applications. The relays are constructed as a multi-chip hybrid device. Actuation control is via an infrared LED. The output switch is a combination of a photodiode array with MOSFET switches and control circuity. The relays can be configured for AC/DC or DC only operation. ORDERING INFORMATION LH1 5 0 1B FEATURES • Isolation test voltage 3750 VRMS • Typical RON 20  • Load voltage 350 V • Clean bounce free switching • Low power consumption • SMD lead available on tape and reel • Compliant to RoHS Directive 2002/95/EC and in accordance to WEEE 2002/96/EC APPLICATIONS • General te.

LH1501BT : The LH1501 relays are SPST normally closed switches (1 form B) that can replace electromechanical relays in many applications. The relays are constructed as a multi-chip hybrid device. Actuation control is via an infrared LED. The output switch is a combination of a photodiode array with MOSFET switches and control circuity. The relays can be configured for AC/DC or DC only operation. ORDERING INFORMATION LH1 5 0 1B FEATURES • Isolation test voltage 3750 VRMS • Typical RON 20  • Load voltage 350 V • Clean bounce free switching • Low power consumption • SMD lead available on tape and reel • Compliant to RoHS Directive 2002/95/EC and in accordance to WEEE 2002/96/EC APPLICATIONS • General te.

LH1502 : LH1502 / LH1502A HIGH VOLTAGE, PHOTO MOS RELAY 65 Shark River Road, Neptune, New Jersey 07753-7423 Tel: 732-922-6333 Fax: 732-922-6363 E-Mail: globalcomponents@msn.com 65 Shark River Road, Neptune, New Jersey 07753-7423 Tel: 732-922-6333 Fax: 732-922-6363 E-Mail: globalcomponents@msn.com .

LH1502A : LH1502 / LH1502A HIGH VOLTAGE, PHOTO MOS RELAY 65 Shark River Road, Neptune, New Jersey 07753-7423 Tel: 732-922-6333 Fax: 732-922-6363 E-Mail: globalcomponents@msn.com 65 Shark River Road, Neptune, New Jersey 07753-7423 Tel: 732-922-6333 Fax: 732-922-6363 E-Mail: globalcomponents@msn.com .

LH1502AB : w w a D . w S a t e e h U 4 t m o .c w w w .D t a S a e h U 4 t e m o .c w w w .D at h S a t e e 4U . m o c .

LH1502BAC : The LH1502 relays contain normally open and normally closed switches that can be used independently as a 1 form A and 1 form B relay, or when used together, as a 1 form C relay. The relays are constructed as a multi-chip hybrid device. Actuation control is via an infrared LED. The output switch is a combination of a photodiode array with MOSFET switches and control circuity. FEATURES • Current limit protection • Isolation test voltage 3750 VRMS • Typical RON 20 Ω • Load voltage 350 V • Load current 150 mA • High surge capability • Clean bounce free switching • Low power consumption • SMD lead available on tape and reel • Material categorization: for definitions of compliance please see www..

LH1502BACTR : The LH1502 relays contain normally open and normally closed switches that can be used independently as a 1 form A and 1 form B relay, or when used together, as a 1 form C relay. The relays are constructed as a multi-chip hybrid device. Actuation control is via an infrared LED. The output switch is a combination of a photodiode array with MOSFET switches and control circuity. FEATURES • Current limit protection • Isolation test voltage 3750 VRMS • Typical RON 20 Ω • Load voltage 350 V • Load current 150 mA • High surge capability • Clean bounce free switching • Low power consumption • SMD lead available on tape and reel • Material categorization: for definitions of compliance please see www..

LH1503AAC : The LH1503 relays are DPST normally open switches (2 Form A) that can replace electromechanical relays in many applications. The relays are constructed using a GaAlAs LED for actuation control and an integrated monolithic die for the switch output. The die, fabricated in a high-voltage dielectrically isolated technology, is comprised of a photodiode array, switch control circuity, and DMOS switches. In addition, these relays employ current-limiting circuity, enabling them to pass FCC 68.302 and other regulatory voltage surge requirements when overvoltage protection is provided. 4° typ. .050 (1.27) typ. Package Dimensions in Inches (mm) DIP pin one ID 4 .268 (6.81) .255 (6.48) 5 6 7 8 1 2 3 .

LH1503AACTR : The LH1503 relays are DPST normally open switches (2 Form A) that can replace electromechanical relays in many applications. The relays are constructed using a GaAlAs LED for actuation control and an integrated monolithic die for the switch output. The die, fabricated in a high-voltage dielectrically isolated technology, is comprised of a photodiode array, switch control circuity, and DMOS switches. In addition, these relays employ current-limiting circuity, enabling them to pass FCC 68.302 and other regulatory voltage surge requirements when overvoltage protection is provided. 4° typ. .050 (1.27) typ. Package Dimensions in Inches (mm) DIP pin one ID 4 .268 (6.81) .255 (6.48) 5 6 7 8 1 2 3 .




Since 2006. D4U Semicon,
Electronic Components Datasheet Search Site. (Privacy Policy & Contact)