DatasheetsPDF.com

KK74ACT299 Datasheet PDF

KODENSHI KOREA
Part Number KK74ACT299
Manufacturer KODENSHI KOREA
Title 8-Bit Bidirectional Universal Shift Register
Description TECHNICAL DATA www.DataSheet4U.com KK74ACT299 8-Bit Bidirectional Universal Shift Register with Parallel I/O High-Speed Silicon-Gate CMOS The K...
Features a multiplexed parallel input/output data port to achieve full 8-bit handling in a 20 pin package. Due to the large output drive capability and the 3-state feature, this device is ideally suited for interface with bus lines in a bus-oriented system. Two Mode-Select inputs and two Output Enable inputs...

File Size 677.25KB
Datasheet PDF File KK74ACT299 PDF File


KK74ACT299 KK74ACT299 KK74ACT299




Similar Ai Datasheet

KK74ACT20 : TECHNICAL DATA www.DataSheet4U.com KK74ACT20 Dual 4-Input NAND Gate High-Speed Silicon-Gate CMOS The KK74ACT20 is identical in pinout to the LS/ALS20, HC/HCT20. The KK74ACT20 may be used as a level converter for interfacing TTL or NMOS outputs to High Speed CMOS inputs. • TTL/NMOS Compatible Input Levels • Outputs Directly Interface to CMOS, NMOS, and TTL • Operating Voltage Range: 4.5 to 5.5 V • Low Input Current: 1.0 µA; 0.1 µA @ 25°C • Outputs Source/Sink 24 mA ORDERING INFORMATION KK74ACT20N Plastic KK74ACT20D SOIC TA = -40° to 85° C for all packages LOGIC DIAGRAM PIN ASSIGNMENT NC = NO CONNECTION FUNCTION TABLE PIN 14 =VCC PIN 7 = GND PINS 3,11 = NO CONNECTION Inputs A L X X X H.

KK74ACT21 : TECHNICAL DATA www.DataSheet4U.com KK74ACT21 Dual 4-Input AND Gate High-Speed Silicon-Gate CMOS The KK74ACT21 is identical in pinout to the LS/ALS21, HC/HCT21. The KK74ACT21 may be used as a level converter for interfacing TTL or NMOS outputs to High Speed CMOS inputs. • TTL/NMOS Compatible Input Levels • Outputs Directly Interface to CMOS, NMOS, and TTL • Operating Voltage Range: 4.5 to 5.5 V • Low Input Current: 1.0 µA; 0.1 µA @ 25°C • Outputs Source/Sink 24 mA ORDERING INFORMATION KK74ACT21N Plastic KK74ACT21D SOIC TA = -40° to 85° C for all packages LOGIC DIAGRAM PIN ASSIGNMENT NC = NO CONNECTION FUNCTION TABLE PIN 14 =VCC PIN 7 = GND PINS 3,11 = NO CONNECTION Inputs A L X X X H .

KK74ACT240 : TECHNICAL DATA www.DataSheet4U.com KK74ACT240 Octal 3-State Inverting Buffer/Line Driver/Line Receiver High-Speed Silicon-Gate CMOS The KK74ACT240 is identical in pinout to the LS/ALS240, HC/HCT240. The KK74ACT240 may be used as a level converter for interfacing TTL or NMOS outputs to High Speed CMOS inputs. This octal inverting buffer/line driver/line receiver is designed to be used with 3-state memory address drivers, clock drivers, and other busoriented systems. The device has inverting outputs and two active-low output enables. • TTL/NMOS Compatible Input Levels • Outputs Directly Interface to CMOS, NMOS, and TTL • Operating Voltage Range: 4.5 to 5.5 V • Low Input Current: 1.0 µA; 0.1 .

KK74ACT241 : TECHNICAL DATA www.DataSheet4U.com KK74ACT241 Octal 3-State Noninverting Buffer/Line Driver/Line Receiver High-Speed Silicon-Gate CMOS The KK74ACT241 is identical in pinout to the LS/ALS241, HC/HCT241. The KK74ACT241 may be used as a level converter for interfacing TTL or NMOS outputs to High Speed CMOS inputs. This octal noninverting buffer/line driver/line receiver is designed to be used with 3-state memory address drivers, clock drivers, and other bus-oriented systems. The device has noninverting outputs and two output enables. Enable A is active-low and Enable B is active-high. • TTL/NMOS Compatible Input Levels • Outputs Directly Interface to CMOS, NMOS, and TTL • Operating Voltage R.

KK74ACT244 : TECHNICAL DATA www.DataSheet4U.com KK74ACT244 Octal 3-State Noninverting Buffer/Line Driver/Line Receiver High-Speed Silicon-Gate CMOS The KK74ACT244 is identical in pinout to the LS/ALS244, HC/HCT244. The KK74ACT244 may be used as a level converter for interfacing TTL or NMOS outputs to High Speed CMOS inputs. This octal noninverting buffer/line driver/line receiver is designed to be used with 3-state memory address drivers, clock drivers, and other bus-oriented systems. The device has noninverting outputs and two active-low output enables. • TTL/NMOS Compatible Input Levels • Outputs Directly Interface to CMOS, NMOS, and TTL • Operating Voltage Range: 4.5 to 5.5 V • Low Input Current: 1..

KK74ACT245 : TECHNICAL DATA www.DataSheet4U.com KK74ACT245 Octal 3-State Noninverting Bus Transceiver High-Speed Silicon-Gate CMOS The KK74ACT245 is identical in pinout to the LS/ALS245, HC/HCT245. The KK74ACT245 may be used as a level converter for interfacing TTL or NMOS outputs to High Speed CMOS inputs. The KK74ACT245 is a 3-state noninverting transceiver that is used for 2-way asynchronous communication between data buses. The device has an active-low Output Enable pin, which is used to place the I/O ports into high-impedance states. The Direction control determines whether data flows from A to B or from B to A. • TTL/NMOS Compatible Input Levels • Outputs Directly Interface to CMOS, NMOS, and TT.

KK74ACT251 : TECHNICAL DATA www.DataSheet4U.com 8-Input Data Selector/Multiplexer with 3-State Outputs High-Speed Silicon-Gate CMOS The KK74ACT251 is identical in pinout to the LS/ALS251, HC/HCT251. The KK74ACT251 may be used as a level converter for interfacing TTL or NMOS outputs to High Speed CMOS inputs. The device selects one of the eight binary Data Inputs, as determined by the Address Inputs. The Output Enable pin must be at a low level for the selected data to appear at the outputs. If Output Enable is high, the Y and the Y outputs are in the high-impedance state. This 3-State feature allows the KK74ACT251 to be used in bus-oriented systems. • TTL/NMOS Compatible Input Levels • Outputs Directly.

KK74ACT253 : TECHNICAL DATA www.DataSheet4U.com KK74ACT253 Dual 4-Input Data Selector/Multiplexer with 3-State Otputs High-Speed Silicon-Gate CMOS The KK74ACT253 is identical in pinout to the LS/ALS253, HC/HCT253. The KK74ACT253 may be used as a level converter for interfacing TTL or NMOS outputs to High Speed CMOS inputs. The Address Inputs select one of four Data Inputs from each multiplexer. Each multiplexer has an active-low Output Enable control and a three-state noninverting output. • TTL/NMOS Compatible Input Levels • Outputs Directly Interface to CMOS, NMOS, and TTL • Operating Voltage Range: 4.5 to 5.5 V • Low Input Current: 1.0 µA; 0.1 µA @ 25°C • Outputs Source/Sink 24 mA ORDERING INFORMAT.

KK74ACT257 : TECHNICAL DATA www.DataSheet4U.com KK74ACT257 Quad 2-Input Data Selector/Multiplexer with 3-State Outputs High-Speed Silicon-Gate CMOS The KK74ACT257 is identical in pinout to the LS/ALS257, HC/HCT257. The KK74ACT257 may be used as a level converter for interfacing TTL or NMOS outputs to High Speed CMOS inputs. This device selects a (4-bit) nibble from either the A or B inputs as determined by the Select input. The nibble is presented at the outputs in noninverted from when the Output Enable pin is at a low level. A high level on the Output Enable pin switches the outputs into the highimpedance state. • TTL/NMOS Compatible Input Levels • Outputs Directly Interface to CMOS, NMOS, and TTL •.

KK74ACT258 : TECHNICAL DATA www.DataSheet4U.com KK74ACT258 Quad 2-Input Data Selector/Multiplexer with 3-State Outputs High-Speed Silicon-Gate CMOS The KK74ACT258 is identical in pinout to the LS/ALS258, HC/HCT258. The KK74ACT258 may be used as a level converter for interfacing TTL or NMOS outputs to High Speed CMOS inputs. This device selects a (4-bit) nibble from either the A or B inputs as determined by the Select input. The nibble is presented at the outputs in inverted from when the Output Enable pin is at a low level. A high level on the Output Enable pin switches the outputs into the high-impedance state. • TTL/NMOS Compatible Input Levels • Outputs Directly Interface to CMOS, NMOS, and TTL • O.

KK74ACT27 : TECHNICAL DATA www.DataSheet4U.com KK74ACT27 Triple 3-Input NOR Gate High-Speed Silicon-Gate CMOS The KK74ACT27 is identical in pinout to the LS/ALS27, HC/HCT27. The KK74ACT27 may be used as a level converter for interfacing TTL or NMOS outputs to High Speed CMOS inputs. • TTL/NMOS Compatible Input Levels • Outputs Directly Interface to CMOS, NMOS, and TTL • Operating Voltage Range: 4.5 to 5.5 V • Low Input Current: 1.0 µA; 0.1 µA @ 25°C • Outputs Source/Sink 24 mA ORDERING INFORMATION KK74ACT27N Plastic KK74ACT27D SOIC TA = -40° to 85° C for all packages LOGIC DIAGRAM PIN ASSIGNMENT FUNCTION TABLE PIN 14 =VCC PIN 7 = GND Inputs A H X X L B X H X L C X X H L Output Y L L L H 1 www.Da.

KK74ACT273 : TECHNICAL DATA www.DataSheet4U.com KK74ACT273 Octal D Flip-Flop with Common Clock and Reset High-Speed Silicon-Gate CMOS The KK74ACT273 is identical in pinout to the LS/ALS273, HC/HCT273. The KK74ACT273 may be used as a level converter for interfacing TTL or NMOS outputs to High Speed CMOS inputs. This device consists of eight D flip-flops with common Clock and Reset inputs. Each flip-flop is loaded with a low-to-high transition of the Clock input. Reset is asynchronous and active low. • TTL/NMOS Compatible Input Levels • Outputs Directly Interface to CMOS, NMOS, and TTL • Operating Voltage Range: 4.5 to 5.5 V • Low Input Current: 1.0 µA; 0.1 µA @ 25°C • Outputs Source/Sink 24 mA ORDERIN.




Since 2006. D4U Semicon,
Electronic Components Datasheet Search Site. (Privacy Policy & Contact)