DatasheetsPDF.com

HCPL-2219 Datasheet PDF


Part Number HCPL-2219
Manufacturer Avago
Title Low Input Current Logic Gate Optocouplers
Description The HCPL-2200/2219 are optically coupled logic gates that combine a GaAsP LED and an integrated high gain photo detector. The detector has a three...
Features
• 2.5 kV/µs minimum Common Mode Rejection (CMR) at VCM = 400 V (HCPL-2219)
• Compatible with LSTTL, TTL, and CMOS logic
• Wide VCC range (4.5 to 20 V)
• 2.5 Mbd guaranteed over temperature
• Low input current (1.6 mA)
• Three state output (no pullup resistor required)
• Guaranteed performance from 0...

File Size 189.46KB
Datasheet HCPL-2219 PDF File








Similar Ai Datasheet

HCPL-2200 : The HCPL-2200/2219 are optically coupled logic gates that combine a GaAsP LED and an integrated high gain photo detector. The detector has a three state output stage and has a detector threshold with hysteresis. The three state output eliminates the need for a pullup resistor and allows for direct drive of data busses. The hysteresis provides differential mode noise immunity and eliminates the potential for output signal chatter. Asuperiorinternalshieldon theHCPL-2219guarantees common mode transient immunity of 2.5 kV/µs at a common mode voltage of 400 volts. The Electrical and Switching Characteristics of the HCPL-2200/2219 are guaranteed over the temperature range of 0° C to 85° C and a VC.

HCPL-2201 : The HCPL-22XX, HCPL-02XX, and HCNW22XX are opticallycoupled logic gates. The HCPL-22XX, and HCPL-02XX contain a GaAsP LED while the HCNW22XX contains an AlGaAs LED. The detectors have totem pole output stages and optical receiver input stages with built-in Schmitt triggers to provide logiccompatible waveforms, eliminating the need for additional waveshaping. A superior internal shield on the HCPL-2211/12, HCPL-0211, Applications • Isolation of High Speed Logic Systems • Computer-Peripheral Interfaces • Microprocessor System Interfaces • Ground Loop Elimination • Pulse Transformer Replacement • High Speed Line Receiver • Power Control Systems Functional Diagram HCPL-2201/11 HCPL-0201/11 HCN.

HCPL-2201 : The HCPL-22XX, HCPL-02XX, and HCNW22XX are optically-coupled logic gates. The HCPL‑22XX, and HCPL-02XX contain a GaAsP LED while the HCNW22XX contains an AlGaAs LED. The detectors have totem pole output stages and optical receiver input stages with built-in Schmitt triggers to provide logic-compatible waveforms, eliminat­ ing the need for additional waveshaping. A superior internal shield on the HCPL-2211/12, HCPL0211, HCPL-2232 and HCNW2211 guarantees common mode transient immunity of 10 kV/µs at a common mode voltage of 1000 volts. Functional Diagram NC 1 HCPL-2201/11 HCPL-0201/11 HCNW2201/11 8 VCC HCPL-2202/12 NC 1 8 VCC ANODE 2 7 VO ANODE 2 7 NC CATHODE 3 6 NC CATHODE 3 6 VO .

HCPL-2202 : The HCPL-22XX, HCPL-02XX, and HCNW22XX are opticallycoupled logic gates. The HCPL-22XX, and HCPL-02XX contain a GaAsP LED while the HCNW22XX contains an AlGaAs LED. The detectors have totem pole output stages and optical receiver input stages with built-in Schmitt triggers to provide logiccompatible waveforms, eliminating the need for additional waveshaping. A superior internal shield on the HCPL-2211/12, HCPL-0211, Applications • Isolation of High Speed Logic Systems • Computer-Peripheral Interfaces • Microprocessor System Interfaces • Ground Loop Elimination • Pulse Transformer Replacement • High Speed Line Receiver • Power Control Systems Functional Diagram HCPL-2201/11 HCPL-0201/11 HCN.

HCPL-2202 : The HCPL-22XX, HCPL-02XX, and HCNW22XX are optically-coupled logic gates. The HCPL‑22XX, and HCPL-02XX contain a GaAsP LED while the HCNW22XX contains an AlGaAs LED. The detectors have totem pole output stages and optical receiver input stages with built-in Schmitt triggers to provide logic-compatible waveforms, eliminat­ ing the need for additional waveshaping. A superior internal shield on the HCPL-2211/12, HCPL0211, HCPL-2232 and HCNW2211 guarantees common mode transient immunity of 10 kV/µs at a common mode voltage of 1000 volts. Functional Diagram NC 1 HCPL-2201/11 HCPL-0201/11 HCNW2201/11 8 VCC HCPL-2202/12 NC 1 8 VCC ANODE 2 7 VO ANODE 2 7 NC CATHODE 3 6 NC CATHODE 3 6 VO .

HCPL-2211 : The HCPL-22XX, HCPL-02XX, and HCNW22XX are opticallycoupled logic gates. The HCPL-22XX, and HCPL-02XX contain a GaAsP LED while the HCNW22XX contains an AlGaAs LED. The detectors have totem pole output stages and optical receiver input stages with built-in Schmitt triggers to provide logiccompatible waveforms, eliminating the need for additional waveshaping. A superior internal shield on the HCPL-2211/12, HCPL-0211, Applications • Isolation of High Speed Logic Systems • Computer-Peripheral Interfaces • Microprocessor System Interfaces • Ground Loop Elimination • Pulse Transformer Replacement • High Speed Line Receiver • Power Control Systems Functional Diagram HCPL-2201/11 HCPL-0201/11 HCN.

HCPL-2211 : The HCPL-22XX, HCPL-02XX, and HCNW22XX are optically-coupled logic gates. The HCPL‑22XX, and HCPL-02XX contain a GaAsP LED while the HCNW22XX contains an AlGaAs LED. The detectors have totem pole output stages and optical receiver input stages with built-in Schmitt triggers to provide logic-compatible waveforms, eliminat­ ing the need for additional waveshaping. A superior internal shield on the HCPL-2211/12, HCPL0211, HCPL-2232 and HCNW2211 guarantees common mode transient immunity of 10 kV/µs at a common mode voltage of 1000 volts. Functional Diagram NC 1 HCPL-2201/11 HCPL-0201/11 HCNW2201/11 8 VCC HCPL-2202/12 NC 1 8 VCC ANODE 2 7 VO ANODE 2 7 NC CATHODE 3 6 NC CATHODE 3 6 VO .

HCPL-2212 : The HCPL-22XX, HCPL-02XX, and HCNW22XX are opticallycoupled logic gates. The HCPL-22XX, and HCPL-02XX contain a GaAsP LED while the HCNW22XX contains an AlGaAs LED. The detectors have totem pole output stages and optical receiver input stages with built-in Schmitt triggers to provide logiccompatible waveforms, eliminating the need for additional waveshaping. A superior internal shield on the HCPL-2211/12, HCPL-0211, Applications • Isolation of High Speed Logic Systems • Computer-Peripheral Interfaces • Microprocessor System Interfaces • Ground Loop Elimination • Pulse Transformer Replacement • High Speed Line Receiver • Power Control Systems Functional Diagram HCPL-2201/11 HCPL-0201/11 HCN.

HCPL-2212 : The HCPL-22XX, HCPL-02XX, and HCNW22XX are optically-coupled logic gates. The HCPL‑22XX, and HCPL-02XX contain a GaAsP LED while the HCNW22XX contains an AlGaAs LED. The detectors have totem pole output stages and optical receiver input stages with built-in Schmitt triggers to provide logic-compatible waveforms, eliminat­ ing the need for additional waveshaping. A superior internal shield on the HCPL-2211/12, HCPL0211, HCPL-2232 and HCNW2211 guarantees common mode transient immunity of 10 kV/µs at a common mode voltage of 1000 volts. Functional Diagram NC 1 HCPL-2201/11 HCPL-0201/11 HCNW2201/11 8 VCC HCPL-2202/12 NC 1 8 VCC ANODE 2 7 VO ANODE 2 7 NC CATHODE 3 6 NC CATHODE 3 6 VO .

HCPL-2231 : The HCPL-22XX, HCPL-02XX, and HCNW22XX are opticallycoupled logic gates. The HCPL-22XX, and HCPL-02XX contain a GaAsP LED while the HCNW22XX contains an AlGaAs LED. The detectors have totem pole output stages and optical receiver input stages with built-in Schmitt triggers to provide logiccompatible waveforms, eliminating the need for additional waveshaping. A superior internal shield on the HCPL-2211/12, HCPL-0211, Applications • Isolation of High Speed Logic Systems • Computer-Peripheral Interfaces • Microprocessor System Interfaces • Ground Loop Elimination • Pulse Transformer Replacement • High Speed Line Receiver • Power Control Systems Functional Diagram HCPL-2201/11 HCPL-0201/11 HCN.

HCPL-2231 : The HCPL-22XX, HCPL-02XX, and HCNW22XX are optically-coupled logic gates. The HCPL‑22XX, and HCPL-02XX contain a GaAsP LED while the HCNW22XX contains an AlGaAs LED. The detectors have totem pole output stages and optical receiver input stages with built-in Schmitt triggers to provide logic-compatible waveforms, eliminat­ ing the need for additional waveshaping. A superior internal shield on the HCPL-2211/12, HCPL0211, HCPL-2232 and HCNW2211 guarantees common mode transient immunity of 10 kV/µs at a common mode voltage of 1000 volts. Functional Diagram NC 1 HCPL-2201/11 HCPL-0201/11 HCNW2201/11 8 VCC HCPL-2202/12 NC 1 8 VCC ANODE 2 7 VO ANODE 2 7 NC CATHODE 3 6 NC CATHODE 3 6 VO .

HCPL-2232 : The HCPL-22XX, HCPL-02XX, and HCNW22XX are opticallycoupled logic gates. The HCPL-22XX, and HCPL-02XX contain a GaAsP LED while the HCNW22XX contains an AlGaAs LED. The detectors have totem pole output stages and optical receiver input stages with built-in Schmitt triggers to provide logiccompatible waveforms, eliminating the need for additional waveshaping. A superior internal shield on the HCPL-2211/12, HCPL-0211, Applications • Isolation of High Speed Logic Systems • Computer-Peripheral Interfaces • Microprocessor System Interfaces • Ground Loop Elimination • Pulse Transformer Replacement • High Speed Line Receiver • Power Control Systems Functional Diagram HCPL-2201/11 HCPL-0201/11 HCN.

HCPL-2232 : The HCPL-22XX, HCPL-02XX, and HCNW22XX are optically-coupled logic gates. The HCPL‑22XX, and HCPL-02XX contain a GaAsP LED while the HCNW22XX contains an AlGaAs LED. The detectors have totem pole output stages and optical receiver input stages with built-in Schmitt triggers to provide logic-compatible waveforms, eliminat­ ing the need for additional waveshaping. A superior internal shield on the HCPL-2211/12, HCPL0211, HCPL-2232 and HCNW2211 guarantees common mode transient immunity of 10 kV/µs at a common mode voltage of 1000 volts. Functional Diagram NC 1 HCPL-2201/11 HCPL-0201/11 HCNW2201/11 8 VCC HCPL-2202/12 NC 1 8 VCC ANODE 2 7 VO ANODE 2 7 NC CATHODE 3 6 NC CATHODE 3 6 VO .

HCPL-2300 : The HCPL-2300/HCPL-0300 optocoupler combines an 820 nm AlGaAs photon emitting diode with an integrated high gain photon detector. This Functional Diagram Schematic ICC 1000 Ω 8 7 VCC RL VO NC 1 8 VCC IF + VF 2 ANODE 2 7 RL 6 CATHODE 3 6 VOUT – 3 SHIELD A 0.1 µF CAPACITOR MUST BE CONNECTED BETWEEN PINS 8 AND 5 (SEE NOTE 1). 5 GND NC 4 5 GND Applications • Ground Loop Elimination • Computer-Peripheral Interfaces • Level Shifting A 0.1 pF bypass capacitor must be connected between pins 5 and 8. TRUTH TABLE (POSITIVE LOGIC) LED OUTPUT ON L OFF H CAUTION: It is advised that normal static precautions be taken in handling and assembly of this component to prevent damage and/or.

HCPL-2300 : The HCPL-2300/HCPL-0300 optocoupler combines an 820 nm AlGaAs photon emitting diode with an integrated high gain photon detector. This combina-tion of Avago designed and manufactured semiconductor devices brings new high performance capabilities to designers of isolated logic and data communication circuits. The new low current, high speed AlGaAs emitter manufactured with a unique diffused junction, has the virtue of fast rise and fall times at low drive currents. Figure 6 illustrates the propaga­tion delay vs. input current characteristic. These unique characteristics enable this device to be used in an RS-232-C inter­face with ground loop isolation and improved common mode rejection. As a .

HCPL-2400 : The HCPL-2400 and HCPL-2430 high speed opto-couplers combine an 820 nm AlGaAs light emitting diode with a high speed photodetector. This combina-tion results in very high data rate capability and low input current. The totem pole output (HCPL-2430) or three state output (HCPL-2400) eliminates the need for a pull up resistor and allows for direct drive of data buses. The detector has optical receiver input stage with builtin Schmitt trigger to provide logic compatible waveforms, eliminating the need for additional waveshaping. The hysteresis provides differential mode noise immunity and mini­mizes the potential for output signal chatter. The electrical and switching characteristics of the HCP.




Since 2006. D4U Semicon,
Electronic Components Datasheet Search Site. (Privacy Policy & Contact)