DatasheetsPDF.com

HCNW138

Part Number HCNW138
Manufacturer Avago
Title High Gain Optocouplers
Description These high gain series couplers use a Light Emitting Diode and an integrated high gain photodetec­tor to provide extremely high current transfer r...
Features
• High current transfer ratio
  – 2000% typical (4500 % typical for HCNW139/138)
• Low input current requirements
  – 0.5 mA
• TTL compatible output
  – 0.1 V VOL typical
• Performance guaranteed over temperature 0°C to 70°C
• Base access allows gain bandwidth adjustment
• High output current
  – 60 mA...

File Size 195.41KB
Datasheet HCNW138 PDF File







Similar Datasheet

HCNW135 : These diode-transistor optocouplers use an insulating layer between a LED and an integrated photodetector to provide electrical insulation between input and output. Separate connections for the photodiode bias and output-transistor collector increase the speed up to a hundred times that of a conventional phototransistor coupler by reducing the base-collector capacitance. These single channel optocoup-lers are available in 8-pin DIP, SO-8, and Widebody package configurations. The 6N135, HCPL-0500, and HCNW135 are for use in TTL/CMOS, TTL/LSTTL or wide-bandwidth analog applications. Current transfer ratio (CTR) for these devices is 7% minimum at IF = 16 mA. The 6N136, HCPL-2502, HCPL-0501, and.

HCNW135 : Single Channel, High Speed Optocouplers Technical Data H 6N135/6 HCNW135/6 HCNW4502/3 HCPL-0452/3 HCPL-0500/1 HCPL-4502/3 Features • 15 kV/µs Minimum Common Mode Transient Immunity at VCM = 1500 V (4503/0453) • High Speed: 1 Mb/s • TTL Compatible • Available in 8-Pin DIP, SO-8, Widebody Packages • Open Collector Output • Guaranteed Performance from Temperature: 0°C to 70°C • Safety Approval UL Recognized – 2500 V rms for 1 minute (5000 V rms for 1 minute for HCNW and Option 020 devices) per UL1577 CSA Approved VDE 0884 Approved –VIORM = 630 V peak for HCPL-4503#060 –VIORM = 1414 V peak for HCNW devices BSI Certified (HCNW devices only) • Dual Channel Version Available (253X/4534/053X/ 0534.

HCNW135 : These diode-transistor optoc­oup­lers use an insulating layer between a LED and an integrated photodetector to provide elec­trical ins­u­lation between input and out­put. Separate connections for the photodiode bias and output-transistor collector increase the speed up to a hundred times that of a conven­tional phototransistor coupler by reduci­ng the base-collector capacitance. These single channel optocoupl­ers are available in 8-Pin DIP­, SO-8 and Widebody package configurations. The 6N135, HCPL-0500, and HCNW135 are for use in TTL/ CMOS, TTL/LSTTL or wide bandwidth analog applications. Current transfer ratio (CTR) for these devices is 7% minimum at IF = 16 mA. The 6N136, HCPL-2502, HCP.

HCNW136 : These diode-transistor optocouplers use an insulating layer between a LED and an integrated photodetector to provide electrical insulation between input and output. Separate connections for the photodiode bias and output-transistor collector increase the speed up to a hundred times that of a conventional phototransistor coupler by reducing the base-collector capacitance. These single channel optocoup-lers are available in 8-pin DIP, SO-8, and Widebody package configurations. The 6N135, HCPL-0500, and HCNW135 are for use in TTL/CMOS, TTL/LSTTL or wide-bandwidth analog applications. Current transfer ratio (CTR) for these devices is 7% minimum at IF = 16 mA. The 6N136, HCPL-2502, HCPL-0501, and.

HCNW136 : Single Channel, High Speed Optocouplers Technical Data H 6N135/6 HCNW135/6 HCNW4502/3 HCPL-0452/3 HCPL-0500/1 HCPL-4502/3 Features • 15 kV/µs Minimum Common Mode Transient Immunity at VCM = 1500 V (4503/0453) • High Speed: 1 Mb/s • TTL Compatible • Available in 8-Pin DIP, SO-8, Widebody Packages • Open Collector Output • Guaranteed Performance from Temperature: 0°C to 70°C • Safety Approval UL Recognized – 2500 V rms for 1 minute (5000 V rms for 1 minute for HCNW and Option 020 devices) per UL1577 CSA Approved VDE 0884 Approved –VIORM = 630 V peak for HCPL-4503#060 –VIORM = 1414 V peak for HCNW devices BSI Certified (HCNW devices only) • Dual Channel Version Available (253X/4534/053X/ 0534.

HCNW136 : These diode-transistor optoc­oup­lers use an insulating layer between a LED and an integrated photodetector to provide elec­trical ins­u­lation between input and out­put. Separate connections for the photodiode bias and output-transistor collector increase the speed up to a hundred times that of a conven­tional phototransistor coupler by reduci­ng the base-collector capacitance. These single channel optocoupl­ers are available in 8-Pin DIP­, SO-8 and Widebody package configurations. The 6N135, HCPL-0500, and HCNW135 are for use in TTL/ CMOS, TTL/LSTTL or wide bandwidth analog applications. Current transfer ratio (CTR) for these devices is 7% minimum at IF = 16 mA. The 6N136, HCPL-2502, HCP.

HCNW137 : H High CMR, High Speed TTL Compatible Optocouplers Technical Data 6N137 HCNW137 HCNW2601 HCNW2611 HCPL-0600 HCPL-0601 HCPL-0611 HCPL-0630 HCPL-0631 HCPL-0661 HCPL-2601 HCPL-2611 HCPL-2630 HCPL-2631 HCPL-4661 Features • 5 kV/µs Minimum Common Mode Rejection (CMR) at VCM = 50 V for HCPL-X601/ X631, HCNW2601 and 10 kV/µs Minimum CMR at VCM = 1000 V for HCPLX611/X661, HCNW2611 • High Speed: 10 MBd Typical • LSTTL/TTL Compatible • Low Input Current Capability: 5 mA • Guaranteed ac and dc Performance over Temperature: -40°C to +85°C • Available in 8-Pin DIP, SOIC-8, Widebody Packages • Strobable Output (Single Channel Products Only) • Safety Approval UL Recognized - 2500 V rms for 1 minute and.

HCNW137 : The Broadcom® 6N137, HCPL-26xx/06xx/4661, HCNW137/26x1 are optically coupled gates that combine a GaAsP light emitting diode and an integrated high gain photo detector. An enable input allows the detector to be strobed. The output of the detector IC is an open collector Schottky-clamped transistor. The internal shield provides a guaranteed common mode transient immunity specification up to 15,000 V/µs at Vcm = 1000V. This unique design provides maximum AC and DC circuit isolation while achieving TTL compatibility. The optocoupler AC and DC operational parameters are guaranteed from – 40°C to +85°C allowing trouble-free system performance. CAUTION! It is advised that normal static precautions.

HCNW137 : The 6N137, HCPL-26xx/06xx/4661, HCNW137/26x1 are optically coupled gates that combine a GaAsP light emitting diode and an integrated high gain photo detector. An enable input allows the detector to be strobed. The output of the detector IC is an open collector Schottkyclamped transistor. The internal shield provides a guaranteed common mode transient immunity specification up to 15,000 V/µs at Vcm = 1000 V. This unique design provides maximum AC and DC circuit isolation while achieving TTL compatibility. The optocoupler AC and DC operational param­ e­ ters are guaranteed from -40 °C to +85 °C allowing troublefree system performance. Features • 15 kV/µs minimum Common Mode Rejection (CMR) a.

HCNW138 : Low Input Current, High Gain Optocouplers Technical Data 6N139 6N138 HCPL-0701 HCPL-0700 HCNW139 HCNW138 Features • High Current Transfer Ratio – 2000% Typical (4500% Typical for HCNW139/138) • Low Input Current Requirements – 0.5 mA • TTL Compatible Output – 0.1 V VOL Typical • Performance Guaranteed over Temperature 0°C to 70°C • Base Access Allows Gain Bandwidth Adjustment • High Output Current – 60 mA • Safety Approval UL Recognized – 2500 V rms for 1 Minute and 5000 V rms* for 1 Minute per UL 1577 CSA Approved VDE 0884 Approved with VIORM = 1414 V peak for HCNW139 and HCNW138 BSI Certified (HCNW139 and HCNW138) • Available in 8-Pin DIP or SOIC-8 Footprint or Widebody Package •MIL-S.

HCNW139 : Low Input Current, High Gain Optocouplers Technical Data 6N139 6N138 HCPL-0701 HCPL-0700 HCNW139 HCNW138 Features • High Current Transfer Ratio – 2000% Typical (4500% Typical for HCNW139/138) • Low Input Current Requirements – 0.5 mA • TTL Compatible Output – 0.1 V VOL Typical • Performance Guaranteed over Temperature 0°C to 70°C • Base Access Allows Gain Bandwidth Adjustment • High Output Current – 60 mA • Safety Approval UL Recognized – 2500 V rms for 1 Minute and 5000 V rms* for 1 Minute per UL 1577 CSA Approved VDE 0884 Approved with VIORM = 1414 V peak for HCNW139 and HCNW138 BSI Certified (HCNW139 and HCNW138) • Available in 8-Pin DIP or SOIC-8 Footprint or Widebody Package •MIL-S.

HCNW139 : These high gain series couplers use a Light Emitting Diode and an integrated high gain photodetec­tor to provide extremely high current transfer ratio between input and output. Separate pins for the photodiode and output stage result in TTL compatible saturation voltages and high speed operation. Where desired the VCC and VO terminals may be tied together to achieve conven­tional photodarlington operation. A base access terminal allows a gain bandwidth adjustment to be made. The 6N139, HCPL-0701, and HCNW139 are for use in CMOS, LSTTL or other low power appli­ca­tions. A 400% minimum current transfer ratio is guaranteed over 0 to 70°C operating range for only 0.5 mA of LED current. The 6N138.




Since 2006. D4U Semicon,
Electronic Components Datasheet Search Site. (Privacy Policy & Contact)