DatasheetsPDF.com

BL8582


Part Number BL8582
Manufacturer BELLING
Title 3-Channels WLED Linear Drive
Description The BL8582 is a CMOS based White/Blue LED driver with stand-alone capability. The driver is primarily designed for LED backlighting of LCD display...
Features
• 2.7 to 5.5V input range
• Single-wire dimming control with linear 16-steps.
• PWM dimming control
• LED sink current of max. 20mA
• Independent current sink circuit for each LED output
• Low standby current
• High accuracy current match on each channel APPLICATIONS
• Small Size Color LCD Backlight...

File Size 170.84KB
Datasheet BL8582 PDF File








Similar Ai Datasheet

BL8580 : The BL8580/1 is a CMOS based White/Blue LED driver with stand-alone capability. The driver is primarily designed for LED backlighting of LCD display powered by Li-ion battery With its high efficiency, low standby current and wide range of input supply voltage, the BL8580/1 is suitable for applications such as portable device display and keypad backlighting. In portable application, three or four-channel LED solutions are popular. BL8580 has three LED channels with a SOT-23-6 package. BL8581 has four LED channels with a MSOP8 package. FEATURES  No external component required  PWM dimming control available  Low noise and EMI  LED sink current of 20mA  Independent current sink circuit for.

BL8581 : The BL8580/1 is a CMOS based White/Blue LED driver with stand-alone capability. The driver is primarily designed for LED backlighting of LCD display powered by Li-ion battery With its high efficiency, low standby current and wide range of input supply voltage, the BL8580/1 is suitable for applications such as portable device display and keypad backlighting. In portable application, three or four-channel LED solutions are popular. BL8580 has three LED channels with a SOT-23-6 package. BL8581 has four LED channels with a MSOP8 package. FEATURES  No external component required  PWM dimming control available  Low noise and EMI  LED sink current of 20mA  Independent current sink circuit for.

BL8581A : The BL8581A is a CMOS based White/Blue LED driver with stand-alone capability. The driver is primarily designed for LED backlighting of LCD display powered by Li-ion battery With its high efficiency, low standby current and wide range of input supply voltage, the BL8581A is suitable for applications such as portable device display and keypad backlighting. It can realize PWM or single-wire dimming control through EN pin. BL8581A has four LED channels with MSOP8 or QFN 3X3 -16 package. FEATURES • 2.7 to 5.5V input range • Single-wire dimming control with linear 16- steps • PWM dimming control • LED sink current of max. 20mA • Independent current sink circuit for each LED output • Low standby .

BL8583 : BL8583 Preliminary Datasheet , LED BL8583 LED 。CMOS , 。BL8583 LED , 。BL8583 3,30mA。 BL8583 。,3 ,。 ,。 BL8583 , 。 3 30mA 5V CMOS 15M VDD DIN LIN OEBIN CKIN RR R LED LED LED VDD DIN OUT0 OUT1 OUT2 DOUT LIN OEBIN BLLC89538033 LOUT OEBOUT CKIN GND CKOUT DOUT LOUT OEBOUT CKOUT www.belling.com.cn 1 BL8583 SOP-14 BL8583 -40~85°C www.belling.com.cn 2 BL8583 Pin NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 Pin name DIN LIN OEBIN CKIN OUT0 GND1 OUT1 GND2 OUT2 CKOUT OEBOUT LOUT DOUT VDD VDD VDIN, VLIN, VOEBIN, VCKIN, VDOUT, VLOUT, VOEBOUT, VCKOUT IOUTn VOUTn FCLK PD TL TOPR TSTG -0.3~7.0 -0.3~VDD+0.3 30 -0.3~VD.

BL8584 : The BL8584 is a CMOS based White/Blue LED driver with stand-alone capability. The driver is primarily designed for LED backlighting of LCD display powered by Li-ion battery With its high efficiency, low standby current and wide range of input supply voltage, the BL8584 is suitable for applications such as portable device display and keypad backlighting. There are six identical channels in BL8584, each of which can drive one LED by current rating of 20mA. BL8584 is available with QFN 3X3-16 package TYPICAL APPLICATION BL8584 6-Channels WLED Linear Driver FEATURES • 6-channels output • 2.7 to 5.5V input range • PWM dimming control • LED sink current of 20mA • Independent current sink circuit .

BL8585 : The BL8585 is a high-voltage adjustable current source with accurate temperature compensation. The device is designed to provide a constant current source determined by an external sense resistor Rsense. The current is adjustable from 10mA to 20mA with less than 10% error while input changes from 5V to 90V. With an external resistor (R1 in Figure 1) between VA and IS pin, the heat in the IC can be significantly reduced while keeping the summation of IC and R1 current to be constant. This is extremely useful in the area that power lines are not very stable. A typical application for the BL8585 is to drive LEDs with a constant current varies from 1020mA. They can also be used in parallel to pr.

BL8586 : BL8586 Preliminary Datasheet , LED BL8586 LED。CMOS ,。BL8586 LED , 。BL8586 6,30mA。 BL8586 。, 6,。 ,。 BL8586 ,。 6 30mA 5V CMOS 15M VDD DIN LIN OEBIN CKIN RR LED LED VDD DIN OUT0 LIN OEBIN BLLC89538066 CKIN GND OUT5 DOUT LOUT OEBOUT CKOUT DOUT LOUT OEBOUT CKOUT BL8586 SSOP-20 -40~85°C www.belling.com.cn 1 BL8586 www.belling.com.cn 2 BL8586 Pi 1 DIN 2 LIN 3 OEBIN 4 CKIN 5 OUT0 6 GND1 7 OUT1 8 OUT3 9 OUT4 10 OUT5 11 SE 12 GND2 13 OUT2 14 CKOUT 15 OEBOUT 16 LOUT 17 DOUT 18 VDD www.belling.com.cn () 3 BL8586 VDD VDIN, VLIN, VOEBIN, VCKIN, VDOUT, VLOUT, VOEBOUT, VCKOUT IOUTn VOUTn FCLK PD TL TOPR TSTG -0.3~7.0 .

BL8587 : BL8587 is a low noise, high efficiency, and constant frequency charge pump DC/DC converter for white LED application. The operation frequency is 1MHz. BL8587 works in load switch (1×) and fractional (1.5×) modes with four independent control outputs, each channel can provide 20mA constant current precisely from a 2.8V to 5.5V supply. Only two external 1µF and two 0.47µF capacitors are required to build a compact and low-cost power supply solution. BL8587 uses EN pin for simple on/off control and single wire serial pulse dimming in 16 steps. A low current shutdown feature disconnects the load from VIN and reduces quiescent current to less than 1µA. FEATURES • Input range: 2.8-5.5V • ±1% LED .

BL8588 : BL8588 is a low noise, high efficiency, and constant frequency charge pump DC/DC converter for white LED application. The operation frequency is 1MHz. BL8588 works in load switch (1×) and fractional (1.5×) modes with four independent control outputs, each channel can provide 20mA constant current precisely from a 2.8V to 5.5V supply. Only two external 1µF and two 0.47µF capacitors are required to build a compact and low-cost power supply solution. BL8588 uses EN pin for simple on/off control and single wire serial pulse dimming in 16 steps. A low current shutdown feature disconnects the load from VIN and reduces quiescent current to less than 1µA. FEATURES • Input range: 2.8-5.5V • ±1% LED .

BL8589 : The BL8589 is designed for LED display applications. The device has an input shift register with corresponding data latches and 16 constant current sink drivers. The device support digital input with internal shift registers and latches, hence can be controlled directly by microprocessor-based systems. With a standard 3.3V or 5V logic supply, serial data input rates can reach up to 30 MHz. The BL8589 allows user defined maximum LED drive current level which is set by a single external resistor. Chip build-in serial data output permits cascading of multiple devices in applications requiring additional drive lines. The BL8589 is available in a variety of 24terminal packages: QFN44-24, which ha.




Since 2006. D4U Semicon,
Electronic Components Datasheet Search Site. (Privacy Policy & Contact)