DatasheetsPDF.com

BA159G Datasheet PDF


Part Number BA159G
Manufacturer Taiwan Semiconductor
Title Glass Passivated Fast Recovery Rectifiers
Description only. No license, express or implied, to any intellectual property rights is granted by this document. Except as provided in TSC’s terms and condi...
Features
● AEC-Q101 qualified available
● Glass passivated chip junction
● High current capability, Low VF
● High reliability
● High surge current capability
● Low power loss, high efficiency
● RoHS Compliant
● Halogen-free according to IEC 61249-2-21 APPLICATIONS
● DC to DC converter
● Switching mode conver...

File Size 521.00KB
Datasheet BA159G PDF File








Similar Ai Datasheet

BA1.5WK : MINIATURE RELAY 2 POLES—1 to 2 A (FOR SIGNAL SWITCHING) BA SERIES s FEATURES q q q q q q q q q Slim type relay for high density mounting CSA recognized Conforms to IEC60950, Bellcore specification and FCC Part 68 —Clearance more than 2.0 mm between coil and contacts —Creepage more than 2.5 mm between coil and contacts —Dielectric strength 2,000 VAC between coil and contacts —Surge strength 3,000 V between coil and contacts (at 2 × 10 µs surge wave) High sensitivity and low consumption power Latching type available High reliability—bifurcated contacts Plastic sealed type Conforms to UL (under approval) SMT is available: BAS s ORDERING INFORMATION [Example] (a) (b) (c) (d) (e) (g) BA L –.

BA101WS1-100 : OF CHANGES DATE 2012.2.6 ISSUE DATE 2012.2.6 PAGE 2 OF 36 PREPARED wwwwww..jjxxllccdd..ccoomm R2010-6053-O(2/3) A4(210 X 297) PRODUCT GROUP REV ISSUE DATE SPEC. NUMBER TFT- LCD PRODUCT P0 SPEC. TITLE BA101WS1-100 Preliminary Product Specification Contents 2012.2.6 PAGE 3 OF 36 No. Item 1.0 General Description 2.0 Absolute Maximum Ratings Page 4 6 3.0 Electrical Specifications 7 4.0 Optical Specifications 10 5.0 Interface Connection 15 6.0 Signal Timing Specification 19 7.0 Signal Timing waveforms 21 8.0 Input Signals, Display Colors & Gray Scale of Colors 23 9.0 10.0 wwwwww..jjxxllccdd..ccoomm11.0 Power Sequence Connector description Mechanical Characteristics .

BA103 : www.DataSheet4U.com DC/DC Converters International Power Sources, Inc. 260 Hopping Brook Road Holliston, Massachusetts 01746 Tel. (508) 429-4440 Fax (800) 226-2100 http://www.intlpower.com BA/BC Series: 1.5 - 6.0 Watts Single and Dual Outputs FEATURES • Input π Filter • Fully Regulated Outputs • Industry Standard Pinouts • 5, 12, 24, 28, and 48 VDC Inputs • Ripple and Noise Less Than 50mVpp • Input/Output Isolation Ordering Guide: Series/Input Code/Output Code Example: BC302 - BC Series, 24 Volt Input, 12 Volt Output @ 0.47A DataSheet4U.com DataShee Input Code Series BA BC Output 1.5 Watts 5-6 Watts 1 2 3 4 5 Input Voltage BA/BC Series 5 V Nominal 12 V Nominal 24 V Nominal 28 V Nomin.

BA10324A : General purpose BA10358 / BA10324A and high reliability BA2904 / BA2902 integrate two or four independent Op-Amps on a single chip and have some features of high-gain, low power consumption, and wide operating voltage range of 3V to 36V (single power supply ). BA2904W have low input offset voltage(2mV max.). Features  Operable with a single power supply  Wide operating supply voltage range  Input and output are operable GND sense  Low supply current  High open loop voltage gain  Wide temperature range Application  Current sense application  Buffer application amplifier  Active filter  Consumer electronics Key Specification  Wide Operating Supply Voltage (single supply): BA10358.

BA10324AF : General purpose BA10358 / BA10324A and high reliability BA2904 / BA2902 integrate two or four independent Op-Amps on a single chip and have some features of high-gain, low power consumption, and wide operating voltage range of 3V to 36V (single power supply ). BA2904W have low input offset voltage(2mV max.). Features  Operable with a single power supply  Wide operating supply voltage range  Input and output are operable GND sense  Low supply current  High open loop voltage gain  Wide temperature range Application  Current sense application  Buffer application amplifier  Active filter  Consumer electronics Key Specification  Wide Operating Supply Voltage (single supply): BA10358.

BA10324AFJ : General purpose BA10358 / BA10324A and high reliability BA2904 / BA2902 integrate two or four independent Op-Amps on a single chip and have some features of high-gain, low power consumption, and wide operating voltage range of 3V to 36V (single power supply ). BA2904W have low input offset voltage(2mV max.). Features  Operable with a single power supply  Wide operating supply voltage range  Input and output are operable GND sense  Low supply current  High open loop voltage gain  Wide temperature range Application  Current sense application  Buffer application amplifier  Active filter  Consumer electronics Key Specification  Wide Operating Supply Voltage (single supply): BA10358.

BA10324AFV : General purpose BA10358 / BA10324A and high reliability BA2904 / BA2902 integrate two or four independent Op-Amps on a single chip and have some features of high-gain, low power consumption, and wide operating voltage range of 3V to 36V (single power supply ). BA2904W have low input offset voltage(2mV max.). Features  Operable with a single power supply  Wide operating supply voltage range  Input and output are operable GND sense  Low supply current  High open loop voltage gain  Wide temperature range Application  Current sense application  Buffer application amplifier  Active filter  Consumer electronics Key Specification  Wide Operating Supply Voltage (single supply): BA10358.

BA10339 : General purpose BA8391G/BA10393F/BA10339xx and high reliability BA2903xxxx/BA2901xxx integrate one, two or four independent high gain voltage comparator. Operating supply voltage range of BA8391G/BA1039 3F/BA2903xxxx/BA2901xxx is wide(2V to 36V). And can be used in a variety of applications because current consumption is small. BA2903Wxx is a low input offset voltage products.(2mV max) Features  Operable with a Single Power Supply  Wide Operating Supply Voltage  Standard Pin Assignments  Input and Output are Ground Sense Operated  Open Collector  Wide Temperature Range Application  General Use  Current Monitor  Battery Monitor  Multi vibrator Key Specifications  Operating Supply.

BA10339F : Standard ICs Quad comparator BA10339 / BA10339F / BA10339FV The BA10339, BA10339F, and BA10339FV each consist of four comparators in a single package. The open collector output allows a wired OR connection. These products feature a wide range of operating power supply voltages, from 3 to 36V with single power supply operation, and from ±1.5 to ± 18V with dual power supply operation. Available packages include 14-pin DIP (BA10339), 14-pin SOP (BA10339F), and 14-pin SSOP-B (BA10339FV). Features • 1) Wide range of operating voltages (single power supply: 3 to 36V; dual power supply: ± 1.5 to ± 18V) 2) Low current dissipation (0.8mA typ., VCC = 5V) 3) Low input offset current (5nA typ., VCC = .

BA10339FV : General purpose BA8391G/BA10393F/BA10339xx and high reliability BA2903xxxx/BA2901xxx integrate one, two or four independent high gain voltage comparator. Operating supply voltage range of BA8391G/BA1039 3F/BA2903xxxx/BA2901xxx is wide(2V to 36V). And can be used in a variety of applications because current consumption is small. BA2903Wxx is a low input offset voltage products.(2mV max) Features  Operable with a Single Power Supply  Wide Operating Supply Voltage  Standard Pin Assignments  Input and Output are Ground Sense Operated  Open Collector  Wide Temperature Range Application  General Use  Current Monitor  Battery Monitor  Multi vibrator Key Specifications  Operating Supply.

BA10358 : General purpose BA10358 / BA10324A and high reliability BA2904 / BA2902 integrate two or four independent Op-Amps on a single chip and have some features of high-gain, low power consumption, and wide operating voltage range of 3V to 36V (single power supply ). BA2904W have low input offset voltage(2mV max.). Features  Operable with a single power supply  Wide operating supply voltage range  Input and output are operable GND sense  Low supply current  High open loop voltage gain  Wide temperature range Application  Current sense application  Buffer application amplifier  Active filter  Consumer electronics Key Specification  Wide Operating Supply Voltage (single supply): BA10358.

BA10358F : General purpose BA10358 / BA10324A and high reliability BA2904 / BA2902 integrate two or four independent Op-Amps on a single chip and have some features of high-gain, low power consumption, and wide operating voltage range of 3V to 36V (single power supply ). BA2904W have low input offset voltage(2mV max.). Features  Operable with a single power supply  Wide operating supply voltage range  Input and output are operable GND sense  Low supply current  High open loop voltage gain  Wide temperature range Application  Current sense application  Buffer application amplifier  Active filter  Consumer electronics Key Specification  Wide Operating Supply Voltage (single supply): BA10358.

BA10358FJ : General purpose BA10358 / BA10324A and high reliability BA2904 / BA2902 integrate two or four independent Op-Amps on a single chip and have some features of high-gain, low power consumption, and wide operating voltage range of 3V to 36V (single power supply ). BA2904W have low input offset voltage(2mV max.). Features  Operable with a single power supply  Wide operating supply voltage range  Input and output are operable GND sense  Low supply current  High open loop voltage gain  Wide temperature range Application  Current sense application  Buffer application amplifier  Active filter  Consumer electronics Key Specification  Wide Operating Supply Voltage (single supply): BA10358.

BA10358FV : General purpose BA10358 / BA10324A and high reliability BA2904 / BA2902 integrate two or four independent Op-Amps on a single chip and have some features of high-gain, low power consumption, and wide operating voltage range of 3V to 36V (single power supply ). BA2904W have low input offset voltage(2mV max.). Features  Operable with a single power supply  Wide operating supply voltage range  Input and output are operable GND sense  Low supply current  High open loop voltage gain  Wide temperature range Application  Current sense application  Buffer application amplifier  Active filter  Consumer electronics Key Specification  Wide Operating Supply Voltage (single supply): BA10358.

BA10393 : Standard ICs Dual comparators BA10393 / BA10393F / BA10393N The BA10393, BA10393F, and BA10393N are dual comparators with open-collector output which allows wired OR connections. The operating power supply voltage ranges from 2 to 36V for a single power supply and ± 1 to ± 18V for a dual power supply. The packages are as follows: DIP 8-pin (BA10393), SOP 8-pin (BA10393F), and SIP 8-pin (BA10393N). Features • 1) Wide operating voltage range. (Single power supply: 2 to 36V, dual power supply: ± 1 to ± 18V) 2) Low current dissipation. (0.4mA typ. at VCC = 5V) 3) Low input offset voltage. (25nA typ. at VCC = 5V) and low input offset voltage. (typically ±1.0mV at VCC = 5V) 4) Wide common-mode .

BA10393F : General purpose BA8391G/BA10393F/BA10339xx and high reliability BA2903xxxx/BA2901xxx integrate one, two or four independent high gain voltage comparator. Operating supply voltage range of BA8391G/BA1039 3F/BA2903xxxx/BA2901xxx is wide(2V to 36V). And can be used in a variety of applications because current consumption is small. BA2903Wxx is a low input offset voltage products.(2mV max) Features  Operable with a Single Power Supply  Wide Operating Supply Voltage  Standard Pin Assignments  Input and Output are Ground Sense Operated  Open Collector  Wide Temperature Range Application  General Use  Current Monitor  Battery Monitor  Multi vibrator Key Specifications  Operating Supply.

BA10393N : Standard ICs Dual comparators BA10393 / BA10393F / BA10393N The BA10393, BA10393F, and BA10393N are dual comparators with open-collector output which allows wired OR connections. The operating power supply voltage ranges from 2 to 36V for a single power supply and ± 1 to ± 18V for a dual power supply. The packages are as follows: DIP 8-pin (BA10393), SOP 8-pin (BA10393F), and SIP 8-pin (BA10393N). Features • 1) Wide operating voltage range. (Single power supply: 2 to 36V, dual power supply: ± 1 to ± 18V) 2) Low current dissipation. (0.4mA typ. at VCC = 5V) 3) Low input offset voltage. (25nA typ. at VCC = 5V) and low input offset voltage. (typically ±1.0mV at VCC = 5V) 4) Wide common-mode .




Since 2006. D4U Semicon,
Electronic Components Datasheet Search Site. (Privacy Policy & Contact)