1500W Surface Mount Transient Voltage Suppressor
1.5SMC6.8A - 1.5SMC250CA
1500W Surface Mount Transient Voltage Suppres...
1500W Surface Mount Transient
Voltage Suppressor
1.5SMC6.8A - 1.5SMC250CA
1500W Surface Mount Transient
Voltage Suppressor
Features
Low inductance, excellent clamping capability
Repetition rate(duty cycle): 0.05%
Fast response time: typically less than 1.0ps from 0V to BV min. Typical IR less than 1 µA above 10V
SMC
High temperature soldering guaranteed 250°C/10 seconds at terminals
This series is UL recognized under component index. File number E315008
RoHS Compliant
Mechanical Data
Case: Epoxy: Terminals: Polarity: Mounting position: Weight:
JEDEC DO-214AB (SMC) molded plastic over glass passivated junction Meets UL 94V-0 flammability rating Solder plated, solderable per MIL-STD-750, Method 2026 Color band denoted positive end (cathode) except Bi-directional Any 0.007 Ounce, 0.21 gram
Maximum Ratings (T Ambient=25ºC unless noted otherwise)
Symbol
Description
Value
PPPM IPPM
Peak Pulse Power Dissipation on 10/1000μs Waveform
Peak Pulse Current on 10/1000μs Waveform
Minimum 1500 See Table
IFSM Peak Forward Surge Current
TJ,TSTG
Operating Junction and Storage Temperature Range
200 -55 to 150
Unit
W A A °C
Conditions
Non-repetitive current pulse, per FIG.3 and derated above TA=25° C per FIG.2
Non-repetitive current pulse
8.3ms single half sine-wave superimposed on rated load, (JEDEC Method) (Note 1,2)
Note: 1. Mounted on 8.0mm x 8.0mm copper pads to each terminal 2. 8.3ms single half sine-wave, or equivalent square wave, Duty cycle= 4 pul...