MOTOROLA
SEMICONDUCTOR TECHNICAL DATA
PECL* to TTL Translator
(+5 Vdc Power Supply Only)
The MC10H350 is a member of M...
MOTOROLA
SEMICONDUCTOR TECHNICAL DATA
PECL* to TTL Translator
(+5 Vdc Power Supply Only)
The MC10H350 is a member of Motorola’s 10H family of high performance
ECL logic. It consists of 4 translators with differential inputs and TTL outputs.
The 3–state outputs can be disabled by applying a HIGH TTL logic level on the
common OE input.
The MC10H350 is designed to be used primarily in systems incorporating
both ECL and TTL logic operating off a common power supply. The separate
VCC power pins are not connected internally and thus isolate the noisy TTL VCC runs from the relatively quiet ECL VCC runs on the printed circuit board. The differential inputs allow the H350 to be used as an inverting or noninverting
translator, or a differential line receiver. The H350 can also drive
CMOS with the
addition of a pullup resistor.
Propagation Delay, 3.5 ns Typical
MECL 10K–Compatible
MAXIMUM RATINGS
Characteristic
Symbol
Rating
Unit
Power Supply (VEE = Gnd) Operating Temperature Range
Storage Temperature Range — Plastic — Ceramic
VCC TA Tstg
7.0
0 to +75
–55 to +150 –55 to +165
Vdc
°C
°C °C
ELECTRICAL CHARACTERISTICS (VCC = 5.0 V ±5%) (See Note 1)
TA = 0°C to 75°C
Characteristic
Symbol
Min
Max
Unit
Power Supply Current
TTL ECL
ICC
— —
20 mA 12
Input Current High
Pin 9 Others
Input Current Low
Pin 9 Others
Input
Voltage High
Pin 9
Input
Voltage Low
Pin 9
Differential Input
Voltage (1) Pins 3–6, 11–14 (1)
IIH IINH
IIL IINL
VIH
VIL
VDIFF
— —
— —...