15KPA Series
TVS Diode
Axial Leaded – 15000W > 15KPA series
RoHS
Pb e3
Uni-directional
Descriptions
The 15KPA Serie...
15KPA Series
TVS Diode
Axial Leaded – 15000W > 15KPA series
RoHS
Pb e3
Uni-directional
Descriptions
The 15KPA Series is designed specifically to protect sensitive electronic equipment from
voltage transients induced by lightning and other transient
voltage events.
Bi-directional
Agency Approvals
Agency
Agency File Number E230531
Maximum Ratings and Thermal Characteristics (TA=25OC unless otherwise noted)
Parameter
Symbol Value Unit
Peak Pulse Power Dissipation by 10/1000μs Test Waveform (Fig.2)(Note 1)
Steady State Power Dissipation on Infinite Heat Sink at TL=75ºC
Peak Forward Surge Current, 8.3ms Single Half Sine Wave Unidirectional Only (Note 2)
Operating Junction and Storage Temperature Range
Typical Thermal Resistance Junction to Lead
Typical Thermal Resistance Junction to Ambient
PPPM
15
PD
8.0
IFSM
400
TJ, TSTG -55 to 175
RƟJL
8.0
RƟJA
40
kW W A °C °C/W °C/W
Notes: 1. Non-repetitive current pulse , per Fig. 4 and derated above TJ (initial) =25OC per Fig. 3. 2. Measured on 8.3ms single half sine wave or equivalent square wave, duty cycle=4 per minute maximum.
Functional Diagram
Features
Glass passivated chip junction in P600 package
15kW peak pulse capability at 10/1000μs waveform, repetition rate (duty cycles):0.01%
Fast response time: typically less than 1.0ps from 0 Volts to BV min
Excellent clamping capability
Typical failure mode is short from over-specified
voltage or current
Whisker test is conducted based on JEDEC JESD20...