24LC08

24LC08 8K-Bit Serial EEPROM OVERVIEW The 24LC08 serial EEPROM has a 8,192-bit (1,024-byte) capacity, supporting the standard I C -bus serial interface. It is fabricated using CERAMATE's most advanced CMOS technology. One of its major’ feature is a hardware-based write protection circuit for the entire memory area. Hardware-based write protection is controlled by the state of the write-protect (WP) pin. Using one-page write mode, you can load up to 16 bytes of data into the EEPROM in a single write operation. Another significant feature of the 24LC08 is its support for fast mode and standard mode. 2 TM FEATURES www.DataSheet4U.com 2 I C-Bus Interface Two-wire serial interface Automatic word address increment Operating Characteristics Operating voltage — 2.5 V to 5.5 V (write) — 2.2 V to 5.5 V (read) EEPROM 8K-bit (1,024-byte) storage area 16-byte page buffer Typical 3.5 ms write cycle time with auto-erase function Hardware-based write protection for the entire EEPROM (using the WP pin) EEPROM programming voltage generated on chip 1,000,000 erase/write cycles 100 years data retention Operating current — Maximum write current: < 3 mA at 5.5 V — Maximum read current: < 200 µA at 5.5 V — Maximum stand-by current: < 5 µA at 3.3 V Operating temperature range — – 25°C to + 70°C (commercial) — – 40°C to + 85°C (industrial) Operating clock frequencies — 100 kHz at standard mode — 400 kHz at fast mode Electrostatic discharge (ESD) — 3,000 V (HBM) — 300 V (MM...