MX25L1005MC. 25L1005MC Datasheet

25L1005MC Datasheet PDF

Part 25L1005MC
Description MX25L1005MC
Feature MX25L1005 MX25L1005 DATASHEET The MX25L1005 product family is not recommended for new designs. The .
Manufacture Macronix International
Datasheet
Download 25L1005MC Datasheet





25L1005MC
MX25L1005
MX25L1005
DATASHEET
The MX25L1005 product family is not recommended for new designs. The MX25L1005C
family is the recommended replacement. Please refer to MX25L1005C datasheet for
full specifications and ordering information, or contact your local sales representative for
additional support.
P/N: PM1238
REV. 2.0, APR. 15, 2009
1



25L1005MC
MX25L1005
1M-BIT [x 1] CMOS SERIAL FLASH
The MX25L1005 product family is not recommended for new designs. The MX25L1005C
family is the recommended replacement. Please refer to MX25L1005C datasheet for
full specifications and ordering information, or contact your local sales representative for
additional support.
FEATURES
GENERAL
• Serial Peripheral Interface (SPI) compatible -- Mode 0 and Mode 3
• 1,048,576 x 1 bit structure
• 32 Equal Sectors with 4K byte each
- Any Sector can be erased individually
• 2 Equal Blocks with 64K byte each
- Any Block can be erased individually
• Single Power Supply Operation
- 2.7 to 3.6 volt for read, erase, and program operations
• Latch-up protected to 100mA from -1V to Vcc +1V
PERFORMANCE
• High Performance
- Fast access time: 85MHz serial clock (15pF + 1TTL Load) and 66MHz serial clock (30pF + 1TTL Load)
- Fast program time: 1.4ms(typ.) and 5ms(max.)/page (256-byte per page)
- Fast erase time: 60ms(typ.) and 120ms(max.)/sector (4K-byte per sector) ; 1s(typ.) and 2s(max.)/block (64K-byte
per block)
• Low Power Consumption
- Low active read current: 12mA(max.) at 85MHz, 8mA(max.) at 66MHz and 4mA(max.) at 33MHz
- Low active programming current: 15mA (max.)
- Low active erase current: 15mA (max.)
- Low standby current: 10uA (max.)
- Deep power-down mode 1uA (typical)
• Minimum 100,000 erase/program cycles
SOFTWARE FEATURES
• Input Data Format
- 1-byte Command code
• Block Lock protection
- The BP0~BP1 status bit defines the size of the area to be software protected against Program and Erase
instructions.
• Auto Erase and Auto Program Algorithm
- Automatically erases and verifies data at selected sector
- Automatically programs and verifies data at selected page by an internal algorithm that automatically times the
program pulse widths (Any page to be programed should have page in the erased state first)
Status Register Feature
P/N: PM1238
REV. 2.0, APR. 15, 2009
2




@ 2014 :: Datasheetspdf.com ::
Semiconductors datasheet search & download site (Privacy Policy & Contact)