Dual PNP Transistor
Surface Mount Dual PNP Transistor 2N5796U (TX, TXV)
Features: • Ceramic 6 pin surface mount package • Small package to m...
Description
Surface Mount Dual PNP Transistor 2N5796U (TX, TXV)
Features: Ceramic 6 pin surface mount package Small package to minimize circuit board area Hermetically sealed Electrical performance similar to dual 2N2907A Processed per MIL-PRF-19500/496
Description: The 2N5796U (TX, TXV) are hermetically sealed, ceramic surface mount devices, consisting of two individual silicon PNP transistors. The six pin ceramic package is ideal for designs where board space and device weight are important design considerations.
Typical screening and lot acceptance tests are per MIL-PRF-19500/496. The burn-in condition is VCB = 30 V, PD = 300 mW each transistor, TA = 25°C. Refer to MIL-PRF-19500/496 for complete requirements.
When ordering parts without processing, do not use the TX or TXV suffix.
Applications: General switching Amplification Signal processing Radio transmission Logic gates
56
32
General Note TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics’ own data and is considered accurate at time of going to print.
© TT electronics plc
Form # 500-1080-001 Rev - 06/2019
Pin # 3 4 5
LED Base Collector Emitter
Pin # 2 1 6
Transistor Base
Collector Emitter
TT Electronics | OPTEK Technology 1645 Wallace Drive, Carrollton, TX 75006 | Ph: +1 972 323 2200
www.ttelectronics.com | sensors@ttelectronics.com
Rev D 01/2020 Page 1
Surface Mount Dual PNP Transistor 2N5796U (TX, TXV)
E...
Similar Datasheet