Manual. 37FD9954 Datasheet
|Total Page||11 Pages|
1015.5 cover 03-10-2003 11:48 Pagina 2
DVI-D VGA 2 VGA 1
Y/C S-VHS AUDIO IN AUDIO IN G/Y/Y R/Pr/Cr
1015.5 en 12-11-2003 11:12 Pagina 1
Unpacking and wall mounting instructions
For the unpacking instructions follow the illustrated steps printed on the
packaging (outside and inside). For the wall mounting instructions follow the
illustrated steps ‘ to § printed on the separate template and in the
Make sure that the wall mount is being fixed securely enough so that it meets
safety standards.The weight of the monitor (excl. packaging) is about 24 kg,
30 kg or 35.5 kg, depending on the screen size (32”, 37” or 42”).
Note: stands are optional acccessories. Consult your dealer.
To prevent any unsafe situations, no naked flame sources, such as lighted candles,
should be placed on or in the vicinity. Avoid heat, direct sunlight and exposure to
rain or water.
The equipment shall not be exposed to dripping or splashing and no objects filled
with liquids, such as vases, shall be placed on it.
Connect your computer
Directly to the monitor
& Connect one end of a VGA cable 1 to the video card of the computer and
the other end to the VGA 1 connector at the rear side of the monitor. Fix the
connectors firmly with the screws on the plug.
é In case of a Multimedia computer, connect the audio cable 2 to the audio
DVI-D VGA 2 VGA 1
Y/C S-VHS AUDI
outputs of your Multimedia computer and to the AUDIO VGA 1 R (right) and
L (left) inputs of the monitor.
VGA 2: The video connector for VGA 2 can be programmed to become an input or an
output via the Setup menu, see p. 6. The function of being input or output is
determined by the used mode. If the monitor is used in video mode, the VGA 2
connector is VGA output. If the monitor is used in monitor mode,the connector is VGA
input or output.
To a electronic receiver box
See the handbook of the receiver box.
& Connect one end of a VGA cable to the video card of the computer and the
other end to the PC/MAC IN connector at the rear side of the receiver box.
Fix the connectors firmly with the screws on the plug.
é In case of a Multimedia computer, connect the audio cable to the audio
outputs of your Multimedia computer and to the AUDIO IN R (right) and L
(left) inputs of the receiver box.
Note: Only use the VGA cable supplied with the monitor.
The Loop Through facility makes it possible to make a daisy chain with a
“ Connect one end of another VGA cable to the VGA 2 connector at the rear
side of the monitor and the other end to the VGA 1 connector of a second
‘ In case of a Multimedia computer, also connect audio cables to the AUDIO L
and R outputs of the original monitor and to the AUDIO L and R inputs of the
The RC out jack next to the VGA 2 connector makes it possible to daisy chain
remote control signals to other equipment.
This output cannot be used to daisy chain a second monitor.
@ 2014 :: Datasheetspdf.com ::|