AT45DB161E
AT45DB161E
16-Mbit DataFlash (with Extra 512-Kbits), 2.3V or 2.5V Minimum SPI Serial Flash Memory
DATASHEET Features
...
Description
AT45DB161E
16-Mbit DataFlash (with Extra 512-Kbits), 2.3V or 2.5V Minimum SPI Serial Flash Memory
DATASHEET Features
Single 2.3V - 3.6V or 2.5V - 3.6V supply Serial Peripheral Interface (SPI) compatible
Supports SPI modes 0 and 3 Supports RapidS™ operation Up to 85MHz Low-power read option up to 15MHz Clock-to-output time (tV) of 6ns maximum 512 bytes per page 528 bytes per page (default) Page size can be factory pre-configured for 512 bytes Allows receiving data while reprogramming the main memory array Byte/Page Program (1 to 512/528 bytes) directly into main memory Buffer Write Buffer to Main Memory Page Program Page Erase (512/528 bytes) Block Erase (4KB) Sector Erase (128KB) Chip Erase (16-Mbits)
Continuous read capability through entire array
User configurable page size
Two fully independent SRAM data buffers (512/528 bytes) Flexible programming options
Flexible erase options
Program and Erase Suspend/Resume Advanced hardware and software data protection features
Individual sector protection Individual sector lockdown to make any sector permanently read-only 64 bytes factory programmed with a unique identifier 64 bytes user programmable
128-byte, One-Time Programmable (OTP) Security Register
Hardware and software controlled reset options JEDEC Standard Manufacturer and Device ID Read Low-power dissipation
400nA Ultra-Deep Power-Down current (typical) 3μA Deep Power-Down current (typical...
Similar Datasheet