www.DataSheet4U.com
54LVTH162245
16-Bit Bus Transceivers with 3-State Outputs
/
/
/
/
Memory
Logic Diagram
FEATU...
www.DataSheet4U.com
54LVTH162245
16-Bit Bus Transceivers with 3-State Outputs
/
/
/
/
Memory
Logic Diagram
FEATURES:
A-Port outputs have equivalent 22-Ω series resistors, so no external resistors are required Support mixed-mode signal operation (5V input and output
voltages with 3.3V VCC) Support unregulated battery operation down to 2.7V Typical VOLP (output ground bounce) < 0.8V at VCC = 3.3V, TA = 25° C IOFF and power-up 3-state support hot insertion Bus hold on data inputs eliminates the need for external pullup/pulldown resistors Distributed VCC and GND pin configuration minimizes highspeed switching noise Flow-through architecture optimizes PCB layout Total dose hardness: - > 100 krad (Si), depending upon space mission Package: 48 pin RAD-PAK® flat pack
DESCRIPTION:
Maxwell Technologies’ 54LVTH162245 devices are 16-bit (dual-octal) non-inverting 3-state transceivers designed for low-
voltage (3.3V) VCC operation, but with the capability to provide a TTL interface to a 5V system environment. These devices can be used as two 8-bit transceivers or one 16-bit transceiver. The devices allow data transmission from the A bus to the B bus or form the B bus to the A bus, depending on the logic level at the direction-control (DIR) input. The output enable (OE) input can be used to disable the device so that the buses are effectively isolated. The A-port outputs, which are designed to source or sink up to 12 mA, include equivalent 22-Ω series resistors ...