www.DataSheet4U.com
5890 AND 5891
Frequently applied in non-impact printer systems, the UCN5890A, UCN5890LW, UCN5891A, ...
www.DataSheet4U.com
5890 AND 5891
Frequently applied in non-impact printer systems, the UCN5890A, UCN5890LW, UCN5891A, and UCN5891LW are BiMOS II serial-input, latched source (high-side) drivers. The octal, high-current smart-power ICs merge an 8-bit
CMOS shift register, associated
CMOS latches, and
CMOS control logic (strobe and output enable) with sourcing power Darlington outputs. Typical applications include multiplexed LED and incandescent displays, relays, solenoids, and similar peripheral loads to a maximum of -500 mA per output.
BIMOS II 8-BIT SERIAL-INPUT, LATCHED SOURCE DRIVERS
GROUND CLOCK SERIAL DATA IN STROBE OUT 1 OUT 2 OUT 3 OUT 4 1 2 3 4 5 6 7 8 ST LATCHES CLK SHIFT REGISTER 16 VDD 15 OE 14 SERIAL DATA OUT LOGIC SUPPLY OUTPUT ENABLE LOAD SUPPLY OUT 8 OUT 7 OUT 6 OUT 5
Data Sheet 26182.12C
VBB 13 12 11 10 9
Except for output
voltage ratings, these smart high-side driver ICs are equivalent. The UCN5890A/LW are rated for operation with load supply
voltages of 20 V to 80 V and a minimum output sustaining
voltage of 50 V. The UCN5891A/LW are optimized for operation with supply
voltages of 5 V to 50 V (35 V sustaining). BiMOS II devices have higher data-input rates than the original BiMOS circuits. With a 5 V supply, they will operate to at least 3.3 MHz. At 12 V, higher speeds are possible. The
CMOS inputs are compatible with standard
CMOS and NMOS logic levels. TTL circuits may require the use of appropriate pull-up resistors to ensure a proper input-logic hi...