DatasheetsPDF.com

5KP5.x Datasheet

Part Number 5KP5.x
Manufacturers Formosa MS
Logo Formosa MS
Description (5KP Series) GLASS PASSIVATED JUNCTION TRANSIENTVOLTAGE SUPPRESSOR
Datasheet 5KP5.x Datasheet5KP5.x Datasheet (PDF)

www.DataSheet4U.com DATA SHEET 5KP SERIES GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR VOLTAGE FEATURES 1.0(25.4)MIN. 5.0 to 220 Volts PEAK PULSE POWER 5000 Watts P-600 Unit: inch(mm) • Plastic package has Underwriters Laboratory Flammability Classification 94V-O • 5000W Peak Pulse Power capability at on 10/1000µs waveform • Excellent clamping capability • Low zener impedance • Repetition rate(Duty Cycle):.05% • Fast response time: typically less than 1.0 ps from 0 volts to BV m.

  5KP5.x   5KP5.x






Part Number 5KP5.0e3
Manufacturers Microsemi
Logo Microsemi
Description 5K-Watt Transient Voltage Suppressor Protection Device
Datasheet 5KP5.x Datasheet5KP5.0e3 Datasheet (PDF)

5KP5.0e3 – 5KP250CAe3 Compliant 5,000 Watt Transient Voltage Suppressor (TVS) Protection Device DESCRIPTION This RoHS compliant transient voltage suppressor series 5KP5.0e3 - 5KP250CAe3 provides a range of standoff voltage options from 5.0 to 250V in both unidirectional and bidirectional options. Clamping action is almost instantaneous. As a result, they provide effective protection from ESD and EFT per IEC61000-4-2 and IEC61000-4-4, as well as transients caused by inductive switching and RFI.

  5KP5.x   5KP5.x







Part Number 5KP5.0Ce3
Manufacturers Microsemi
Logo Microsemi
Description 5K-Watt Transient Voltage Suppressor Protection Device
Datasheet 5KP5.x Datasheet5KP5.0Ce3 Datasheet (PDF)

5KP5.0e3 – 5KP250CAe3 Compliant 5,000 Watt Transient Voltage Suppressor (TVS) Protection Device DESCRIPTION This RoHS compliant transient voltage suppressor series 5KP5.0e3 - 5KP250CAe3 provides a range of standoff voltage options from 5.0 to 250V in both unidirectional and bidirectional options. Clamping action is almost instantaneous. As a result, they provide effective protection from ESD and EFT per IEC61000-4-2 and IEC61000-4-4, as well as transients caused by inductive switching and RFI.

  5KP5.x   5KP5.x







Part Number 5KP5.0CAe3
Manufacturers Microsemi
Logo Microsemi
Description 5K-Watt Transient Voltage Suppressor Protection Device
Datasheet 5KP5.x Datasheet5KP5.0CAe3 Datasheet (PDF)

5KP5.0e3 – 5KP250CAe3 Compliant 5,000 Watt Transient Voltage Suppressor (TVS) Protection Device DESCRIPTION This RoHS compliant transient voltage suppressor series 5KP5.0e3 - 5KP250CAe3 provides a range of standoff voltage options from 5.0 to 250V in both unidirectional and bidirectional options. Clamping action is almost instantaneous. As a result, they provide effective protection from ESD and EFT per IEC61000-4-2 and IEC61000-4-4, as well as transients caused by inductive switching and RFI.

  5KP5.x   5KP5.x







Part Number 5KP5.0CA-HRA
Manufacturers Littelfuse
Logo Littelfuse
Description TVS Diodes
Datasheet 5KP5.x Datasheet5KP5.0CA-HRA Datasheet (PDF)

TVS Diodes Axial Leaded – 5 kW > 5KP-HRA series 5KP-HRA Series RoHS Pb e3 Uni-directional Bi-directional Agency Approvals AGENCY AGENCY FILE NUMBER E230531 Maximum Ratings and Thermal Characteristics (TA=25OC unless otherwise noted) Parameter Symbol Value Unit Peak Pulse Power Dissipation by 10/1000μs Test Waveform (Fig.2) (Note 1) Steady State Power Dissipation on Infinite Heat Sink at TL=75ºC Peak Forward Surge Current, 8.3ms Single Half Sine Wave Unidirectional Only (Note 2) Maximu.

  5KP5.x   5KP5.x







(5KP Series) GLASS PASSIVATED JUNCTION TRANSIENTVOLTAGE SUPPRESSOR

www.DataSheet4U.com DATA SHEET 5KP SERIES GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR VOLTAGE FEATURES 1.0(25.4)MIN. 5.0 to 220 Volts PEAK PULSE POWER 5000 Watts P-600 Unit: inch(mm) • Plastic package has Underwriters Laboratory Flammability Classification 94V-O • 5000W Peak Pulse Power capability at on 10/1000µs waveform • Excellent clamping capability • Low zener impedance • Repetition rate(Duty Cycle):.05% • Fast response time: typically less than 1.0 ps from 0 volts to BV min .052(1.3) .048(1.2) .360(9.1) • Typical IR less than 1µA above 10V .340(8.6) 1.0(25.4)MIN. MECHANICALDATA Case: JEDEC P-600 molded plastic Terminals: Axial leads, solderable per MIL-STD-750, Method 2026 Polarity: Color band denoted cathode except Bipolar Mounting Position: Any Weight: 0.07 ounce, 2.1 gram .360(9.1) .340(8.6) DEVICES FOR BIPOLAR APPLICATIONS For Bidirectional use C or CA Suffix for types 5KP5.0 thru types 5KP220 Electrical characteristics apply in both directions. MAXIMUM RATINGS AND CHARACTERISTICS Rating at 25°Cambient temperature unless otherwise specified. Resistive or inductive load, 60Hz. For Capacitive load derate current by 20%. Rati ng Peak Power D i ssi pati on at T A =25O C , T P=1ms(Note 1) Steady State Power di ssi pati on at TL = 7 5 O C Lead Lengths .375", (95mm) (Note 2) Peak Forward Surge C urrent, 8.3ms Si ngle Half Si ne-Wave Superi mposed on Rated Load (JEC ED Method) (Note 3) Operati ng Juncti on and Storage Temperature Range Symbol PPK .


2007-09-03 : CXA1355L    PME264    PME261    TB1274BFG    ISD1700    ISD1740    ISD1730    ISD1750    ISD1760    ISD1790   


@ 2014 :: Datasheetspdf.com ::
Semiconductors datasheet search & download site (Privacy Policy & Contact)