HIGH-SPEED 32K x 8 DUAL-PORT STATIC RAM
HIGH-SPEED 32K x 8 DUAL-PORT STATIC RAM
7007L
Features
◆ True Dual-Ported memory cells which allow simultaneous reads ...
Description
HIGH-SPEED 32K x 8 DUAL-PORT STATIC RAM
7007L
Features
◆ True Dual-Ported memory cells which allow simultaneous reads of the same memory location
◆ High-speed access – Commercial: 15ns (max.) – Industrial: 20ns (max.)
◆ Low-power operation – IDT7007L Active: 850mW (typ.) Standby: 1mW (typ.)
◆ IDT7007 easily expands data bus width to 16 bits or more using the Master/Slave select when cascading more than one device
◆ M/S = H for BUSY output flag on Master, M/S = L for BUSY input on Slave
◆ Interrupt Flag ◆ On-chip port arbitration logic ◆ Full on-chip hardware support of semaphore signaling
between ports ◆ Fully asynchronous operation from either port ◆ TTL-compatible, single 5V (±10%) power supply ◆ Available in a 68-pin PLCC and a 80-pin TQFP ◆ Industrial temperature range (–40°C to +85°C) is available
for selected speeds ◆ Green parts available, see ordering information
Functional Block Diagram
OEL
CEL R/WL
OER
CER R/WR
I/O0L- I/O7L
BUSYL(1,2) A14L A0L
I/O Control
I/O Control
Address Decoder
CEL OEL R/WL
15
MEMORY ARRAY
ARBITRATION INTERRUPT SEMAPHORE LOGIC
15
SEML INTL(2)
M/S
NOTES: 1. (MASTER): BUSY is output; (SLAVE): BUSY is input. 2. BUSY and INT outputs are non-tri-stated push-pull.
1
Address Decoder
CER OER R/WR
I/O0R-I/O7R
BUSYR(1,2) A14R A0R
SEMR INTR(2)
2940 drw 01
SEPTEMBER 2019
DSC 2940/16
7007L High-Speed 32K x 8 Dual-Port Static RAM
Military, Industrial and Commercial Temperature Ranges
Description
The IDT7007 is a high-speed 32K x 8 Dual...
Similar Datasheet