DUAL-PORT STATIC RAM
HIGH-SPEED 3.3V 8K x 8 DUAL-PORT STATIC RAM
70V05S/L
Features
◆ True Dual-Ported memory cells which allow simultaneous...
Description
HIGH-SPEED 3.3V 8K x 8 DUAL-PORT STATIC RAM
70V05S/L
Features
◆ True Dual-Ported memory cells which allow simultaneous reads of the same memory location
◆ High-speed access – Commercial: 15ns (max.) – Industrial: 20ns (max.)
◆ Low-power operation – IDT70V05L Active: 380mW (typ.) Standby: 660μW (typ.)
◆ IDT70V05 easily expands data bus width to 16 bits or more using the Master/Slave select when cascading more than one device
◆ M/S = VIH for BUSY output flag on Master M/S = VIL for BUSY input on Slave
◆ Interrupt Flag ◆ On-chip port arbitration logic ◆ Full on-chip hardware support of semaphore signaling
between ports ◆ Fully asynchronous operation from either port ◆ TTL-compatible, single 3.3V (±0.3V) power supply ◆ Available in 68-pin PLCC and a 64-pin TQFP ◆ Industrial temperature range (-40°C to +85°C) is available
for selected speeds ◆ Green parts available, see ordering information
Functional Block Diagram
OEL
CEL R/WL
OER
CER R/WR
I/O0L- I/O7L
BUSYL(1,2) A12L A0L
I/O Control
I/O Control
Address Decoder
CEL OEL R/WL
13
MEMORY ARRAY
ARBITRATION INTERRUPT SEMAPHORE
LOGIC
13
SEML INTL(2)
NOTES: 1. (MASTER): BUSY is output; (SLAVE): BUSY is input. 2. BUSY outputs and INT outputs are non-tri-stated push-pull.
M/S
Address Decoder
CER OER R/WR
1
,
I/O0R-I/O7R BUSYR(1,2) A12R A0R
SEMR INTR(2)
2942 drw 01
JUNE 2019
DSC 2941/12
70V05L High-Speed 3.3V 8K x 8 Dual-Port Static RAM
Description
The IDT70V05 is a high-speed 8K x 8 Dual-Port Static RAM. The IDT70V05 is ...
Similar Datasheet