74ALVC164245
16-bit dual supply translating transceiver; 3-state
Rev. 11 — 27 July 2021
Product data sheet
1. Genera...
74ALVC164245
16-bit dual supply translating transceiver; 3-state
Rev. 11 — 27 July 2021
Product data sheet
1. General description
The 74ALVC164245 is a high-performance, low-power, low-
voltage, Si-gate
CMOS device, superior to most advanced
CMOS compatible TTL families.
The 74ALVC164245 is a 16-bit (dual octal) dual supply translating transceiver featuring non-inverting 3-state bus compatible outputs in both send and receive directions. It is designed to interface between a 3 V and 5 V bus in a mixed 3 V and 5 V supply environment.
This device can be used as two 8-bit transceivers or one 16-bit transceiver.
The direction control inputs (1DIR and 2DIR) determine the direction of the data flow. nDIR (active HIGH) enables data from nAn ports to nBn ports. nDIR (active LOW) enables data from nBn ports to nAn ports. The output enable inputs (1OE and 2OE), when HIGH, disable both nAn and nBn ports by placing them in a high-impedance OFF-state. Pins nAn, nOE and nDIR are referenced to VCC(A) and pins nBn are referenced to VCC(B).
In suspend mode, when one of the supply
voltages is zero, there will be no current flow from the non-zero supply towards the zero supply. The nAn-outputs must be set 3-state and the
voltage on the A-bus must be smaller than Vdiode (typical 0.7 V). VCC(B) ≥ VCC(A) (except in suspend mode).
2. Features and benefits
Wide supply
voltage range: 3 V port (VCC(A)): 1.5 V to 3.6 V 5 V port (VCC(B)): 1.5 V to 5.5 V
CMOS low power consumption Overvoltag...