74AVC16245-Q100
16-bit transceiver with direction pin; 3.6 V tolerant; 3-state
Rev. 2 — 16 March 2015
Product data sh...
74AVC16245-Q100
16-bit transceiver with direction pin; 3.6 V tolerant; 3-state
Rev. 2 — 16 March 2015
Product data sheet
1. General description
The 74AVC16245-Q100 is a 16-bit transceiver featuring non-inverting 3-state bus compatible outputs in both send and receive directions. The device features two output enable inputs (nOE) for easy cascading and two send/receive inputs (nDIR) for direction control. Inputs nOE control the outputs so that the buses are effectively isolated. This device can be used as two 8-bit transceivers or one 16-bit transceiver.
The 74AVC16245-Q100 is designed to have an extremely fast propagation delay and a minimum amount of power consumption.
To ensure the high-impedance output state during power-up or power-down, tie pins nOE to VCC through a pull-up resistor (Live Insertion).
A Dynamic Controlled Output (DCO) circuitry is implemented to support termination line drive during transient (see Figure 4 and Figure 5)
This product has been qualified to the Automotive Electronics Council (AEC) standard Q100 (Grade 3) and is suitable for use in automotive applications.
2. Features and benefits
Automotive product qualification in accordance with AEC-Q100 (Grade 3) Specified from 40 C to +85 C
Wide supply
voltage range from 1.2 V to 3.6 V Complies with JEDEC standards:
JESD8-7 (1.2 V to 1.95 V) JESD8-5 (1.8 V to 2.7 V) JESD8-1A (2.7 V to 3.6 V) ESD protection: MIL-STD-883, method 3015 exceeds 1000 V HBM JESD22-A114F exceeds 1000 V...