74AVC16835A

74AVC16835A 18-bit registered driver with Dynamic Controlled Outputs; 3-state Rev. 6 — 24 September 2018 Product data sheet 1. General description The 74AVC16835A is an 18-bit universal bus driver. Data flow is controlled by output enable (OE), latch enable (LE) and clock inputs (CP). This product is designed to have an extremely fast propagation delay and a minimum amount of power consumption. To ensure the high-impedance state during power up or power down, OE should be tied to VCC through a pullup resistor (Live Insertion). A Dynamic Controlled Output (DCO) circuitry is implemented to support termination line drive during transient. See Fig. 5 for typical curves. 2. Features and benefits Wide supply voltage range from 1.2 V to 3.6 V Complies with JEDEC standards: JESD8-7 (1.2 V to 1.95 V) JESD8-5 (1.8 V to 2.7 V) JESD8-1A (2.7 V to 3.6 V) CMOS low power consumption Input/output tolerant up to 3.6 V Dynamic Controlled Output (DCO) circuit dynamically changes output impedance, resulting in noise reduction without speed degradation Low inductance multiple VCC and GND pins to minimize noise and ground bounce Power off disables 74AVC16835A outputs, permitting Live Insertion Integrated input diodes to minimize input overshoot and undershoot 3. Ordering information Table 1. Ordering information Type number Package Temperature range Name Description 74AVC16835ADGG -40 °C to + 85 °C TSSOP56 plastic thin shrink small outline package; 56 leads; bod...