DatasheetsPDF.com

74AVC16836A Datasheet

Part Number 74AVC16836A
Manufacturers nexperia
Logo nexperia
Description 20-bit registered driver
Datasheet 74AVC16836A Datasheet74AVC16836A Datasheet (PDF)

74AVC16836A 20-bit registered driver with inverted register enable and Dynamic Controlled Outputs; 3-state Rev. 6 — 24 September 2018 Product data sheet 1. General description The 74AVC16836A is a 20-bit universal bus driver. Data flow is controlled by output enable (OE), latch enable (LE) and clock inputs (CP). This product is designed to have an extremely fast propagation delay and a minimum amount of power consumption. To ensure the high-impedance state during power up or power down, OE .

  74AVC16836A   74AVC16836A






Part Number 74AVC16836A
Manufacturers NXP
Logo NXP
Description 20-bit registered driver
Datasheet 74AVC16836A Datasheet74AVC16836A Datasheet (PDF)

www.DataSheet4U.com INTEGRATED CIRCUITS 74AVC16836A 20-bit registered driver with inverted register enable and Dynamic Controlled Outputs™ (3-State) Product data Supersedes data of 2000 Aug 03 2002 Aug 02 Philips Semiconductors Philips Semiconductors Product data 20-bit registered driver with inverted register enable and Dynamic Controlled Outputs™ (3-State) 74AVC16836A FEATURES • Wide supply voltage range of 1.2 V to 3.6 V • Complies with JEDEC standard no. 8-1A/5/7. • CMOS low power c.

  74AVC16836A   74AVC16836A







20-bit registered driver

74AVC16836A 20-bit registered driver with inverted register enable and Dynamic Controlled Outputs; 3-state Rev. 6 — 24 September 2018 Product data sheet 1. General description The 74AVC16836A is a 20-bit universal bus driver. Data flow is controlled by output enable (OE), latch enable (LE) and clock inputs (CP). This product is designed to have an extremely fast propagation delay and a minimum amount of power consumption. To ensure the high-impedance state during power up or power down, OE should be tied to VCC through a pullup resistor (Live Insertion). A Dynamic Controlled Output (DCO) circuitry is implemented to support termination line drive during transient. See Fig. 5 for typical curves. 2. Features and benefits • Wide supply voltage range from 1.2 V to 3.6 V • Complies with JEDEC standards: • JESD8-7 (1.2 V to 1.95 V) • JESD8-5 (1.8 V to 2.7 V) • JESD8-1A (2.7 V to 3.6 V) • CMOS low power consumption • Input/output tolerant up to 3.6 V • Dynamic Controlled Output (DCO) circuit dynamically changes output impedance, resulting in noise reduction without speed degradation • Low inductance multiple VCC and GND pins to minimize noise and ground bounce • Power off disables 74AVC16836A outputs, permitting Live Insertion • Integrated input diodes to minimize input overshoot and undershoot 3. Ordering information Table 1. Ordering information Type number Package Temperature range Name Description 74AVC16836ADGG -40 °C to + 85 °C TSSOP56 plastic thin shrink small ou.


2019-07-23 : BC817K    BAS21TH    MMZ0603AFY560VT000    BAS16TH    74AHC123A    74ABT74    74ALVT16823    74LV123    74LV4060    74HCT4538   


@ 2014 :: Datasheetspdf.com ::
Semiconductors datasheet search & download site (Privacy Policy & Contact)