74AVCH20T245
20-bit dual supply translating transceiver with configurable voltage translation; 3-state
Rev. 01 — 13 Janu...
74AVCH20T245
20-bit dual supply translating transceiver with configurable
voltage translation; 3-state
Rev. 01 — 13 January 2010 Product data sheet
1. General description
The 74AVCH20T245 is a 20-bit, dual supply transceiver that enables bi-directional
voltage level translation. The device can be used as two 10-bit transceivers or as a single 20-bit transceiver. It features four 10-bit input-output ports (1An, 1Bn and 2An, 2Bn), two output enable inputs (nOE), two direction inputs (DIR) and dual supplies (VCC(A) and VCC(B)). VCC(A) and VCC(B) can be independently supplied at any
voltage between 0.8 V and 3.6 V making the device suitable for bi-directional
voltage level translation between any of the low
voltage nodes: 0.8 V, 1.2 V, 1.5 V, 1.8 V, 2.5 V and 3.3 V. The 1An and 2An ports, nOE and nDIR are referenced to VCC(A), the 1Bn and 2Bn ports are referenced to VCC(B). A HIGH on a 1DIR allows transmission from 1An to 1Bn and a LOW on 1DIR allows transmission from 1Bn to 1An. A HIGH on nOE causes the outputs to assume a HIGH impedance OFF-state. The device is fully specified for partial power-down applications using IOFF. The IOFF circuitry disables the output, preventing any damaging backflow current through the device when it is powered down. In suspend mode when either VCC(A) or VCC(B) are at GND level, all output ports will assume a high impedance OFF-state. The bus hold circuitry on the powered-up side always stays active.
2. Features
Wide supply
voltage range: VCC...